Hand Strap
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Isotta Hand Strap, made in comfortable neoprene, guarantees the best comfort and security even during long dives.
Combined with a solid safety adjustable strap for a perfect fit, it stays firmly around the wrist, preventing falling and stabilizing your housing while shooting. ?Isotta Hand Strap is easily installed directly onto the right handle of the housing.
It is possible to mount it also on the left side.
| Body Material: | Neoprene, Stainless steel |
|---|
Technical data
für Spiegelreflex- und Mirrorless-Gehäuse von Isotta
Scope of delivery
1 Isotta Handschlaufe
Login
There aren't any asked questions yet.
Panasonic GH5 (II) / GH5S Underwater Housing by Isotta
€3,100.00*
The housing for Panasonic Lumix GH5 (II) / Panasonic Lumix DC-GH5S allows to capitalize on the camera full potential and to capture amazing pictures underwater.
Product details Underwater Housing Panasonic GH5 (II) / GH5S
An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons.
The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting.
The housing stands with great stability due to sturdy and wide rubber feet located on the bottom.
ONE HAND OPEN/CLOSE
It’s very easy to open and close Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place.
PORTS AND EXTENSION RING
A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.
Light and flash trigger
Two fibre optic connections are located in front of the built-in flash and allow the use of external flash units. They have a manual flash triggering system that can be used with standard over-optical connections.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles, using the Isotta top handle or the M6 and M8 threaded holes on the bottom.
Controls
ON/OFF of Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S;
Own camera strobe open/close;
Ergonomic camera focusing and shutter button for an easy use with gloves;
Lens release;
Rear control panel;
Upper control panel;
All controls are available on the housing;
Features
Ergonomic side handles, adjustable (via optional accessory);
Two fiber optic connectors;
Manual Flash Trigger included;
Two M16 halls to be use optionally with electrical sync cord bulkheads and for installation of accessories, e.g. vacuum valves or monitors;
Back housing completely separable from the front housing;
Tray with lock for the easy fitting of the camera;
Single-hand closing knob for back housing;
Aluminum buttons and dials with engraved symbols identical to camera controls;
Wide back display viewfinder glass with optical viewfinder;
Dual O-Ring seals on all buttons and removable parts;
Moisture sensor with LED indicator and acoustic signal (replaceable battery);
Removable port - 102mm bayonet;
Ports security latch to prevent accidental opening;
Wide, rubber covered feet for solid footing on boat floors or sea floor;
M8 hole located on upper side of the housing for various accessories such as focus lights;
Two M6 holes positioned on housing bottom side for different accessories such as brackets for strobes or tripods;
External viewfinders can be mounted, INON X-2 compatible;
Sony a7R III Underwater Housing by Isotta
€3,290.00*
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons.
The rear flap has a large window glass for a fine camera display and optical viewfinder and is completely separated from the front body to facilitate camera mounting.
The enclosure is very stable due to the sturdy and wide rubber feet on the underside.
Can be opened and closed with one hand
It is very easy to open and close the Sony a7R III without the user having to do so using the top spiral and bottom centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera securely in place.
Ports and extension ring
A range of port and extension rings are available in the relevant section. The detachable port mounts to the Sony a7R III body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and Performance.
Light
Two fibre optic ports allow the use of an external flash via the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors.
Construction and safety
Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the Bottom.
Operation
Sony a7R III ON/OFF
Ergonomic camera focus and shutter release for easy gloved operation
Lens release
Rear control panel
Upper control Panel
All controls are on the body
Features:
Ergonomic side handles, adjustable (via optional accessories);
Two fibre optic ports;
Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;
The rear enclosure is fully detachable from the front enclosure;
Locking compartment for easy camera insertion;
One-handed locking button for the rear housing;
Aluminium buttons and dials with engraved symbols identical to the camera controls;
Viewfinder glass with wide back;
Double O-ring seals on all buttons and removable parts;
Humidity sensor with LED indicator (replaceable battery);
Detachable port -120 mm bayonet;
Safety lock on ports to prevent accidental opening;
Wide, rubberised feet for firm footing on boat bottoms or seabed;
M8 hole at the top of the housing for various accessories such as focusing lights;
Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods;
External viewfinders can be mounted, INON X-2 compatible;
JTL Cross-selling
Panasonic GH5 (II) / GH5S Underwater Housing by Isotta
€3,100.00*
The housing for Panasonic Lumix GH5 (II) / Panasonic Lumix DC-GH5S allows to capitalize on the camera full potential and to capture amazing pictures underwater.
Product details Underwater Housing Panasonic GH5 (II) / GH5S
An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons.
The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting.
The housing stands with great stability due to sturdy and wide rubber feet located on the bottom.
ONE HAND OPEN/CLOSE
It’s very easy to open and close Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place.
PORTS AND EXTENSION RING
A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.
Light and flash trigger
Two fibre optic connections are located in front of the built-in flash and allow the use of external flash units. They have a manual flash triggering system that can be used with standard over-optical connections.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles, using the Isotta top handle or the M6 and M8 threaded holes on the bottom.
Controls
ON/OFF of Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S;
Own camera strobe open/close;
Ergonomic camera focusing and shutter button for an easy use with gloves;
Lens release;
Rear control panel;
Upper control panel;
All controls are available on the housing;
Features
Ergonomic side handles, adjustable (via optional accessory);
Two fiber optic connectors;
Manual Flash Trigger included;
Two M16 halls to be use optionally with electrical sync cord bulkheads and for installation of accessories, e.g. vacuum valves or monitors;
Back housing completely separable from the front housing;
Tray with lock for the easy fitting of the camera;
Single-hand closing knob for back housing;
Aluminum buttons and dials with engraved symbols identical to camera controls;
Wide back display viewfinder glass with optical viewfinder;
Dual O-Ring seals on all buttons and removable parts;
Moisture sensor with LED indicator and acoustic signal (replaceable battery);
Removable port - 102mm bayonet;
Ports security latch to prevent accidental opening;
Wide, rubber covered feet for solid footing on boat floors or sea floor;
M8 hole located on upper side of the housing for various accessories such as focus lights;
Two M6 holes positioned on housing bottom side for different accessories such as brackets for strobes or tripods;
External viewfinders can be mounted, INON X-2 compatible;
Sony a7R III Underwater Housing by Isotta
€3,290.00*
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons.
The rear flap has a large window glass for a fine camera display and optical viewfinder and is completely separated from the front body to facilitate camera mounting.
The enclosure is very stable due to the sturdy and wide rubber feet on the underside.
Can be opened and closed with one hand
It is very easy to open and close the Sony a7R III without the user having to do so using the top spiral and bottom centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera securely in place.
Ports and extension ring
A range of port and extension rings are available in the relevant section. The detachable port mounts to the Sony a7R III body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and Performance.
Light
Two fibre optic ports allow the use of an external flash via the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors.
Construction and safety
Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the Bottom.
Operation
Sony a7R III ON/OFF
Ergonomic camera focus and shutter release for easy gloved operation
Lens release
Rear control panel
Upper control Panel
All controls are on the body
Features:
Ergonomic side handles, adjustable (via optional accessories);
Two fibre optic ports;
Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;
The rear enclosure is fully detachable from the front enclosure;
Locking compartment for easy camera insertion;
One-handed locking button for the rear housing;
Aluminium buttons and dials with engraved symbols identical to the camera controls;
Viewfinder glass with wide back;
Double O-ring seals on all buttons and removable parts;
Humidity sensor with LED indicator (replaceable battery);
Detachable port -120 mm bayonet;
Safety lock on ports to prevent accidental opening;
Wide, rubberised feet for firm footing on boat bottoms or seabed;
M8 hole at the top of the housing for various accessories such as focusing lights;
Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods;
External viewfinders can be mounted, INON X-2 compatible;