Isotta Unterwassergehäuse

Since 1967, the Isotta family has been distributing high-quality equipment for underwater video, photography and lighting and started its own production in 1980. Since then, Isotta has been known for its unmistakable red underwater housings made of high-quality aluminium.

In four decades of development, the company has always offered its customers first-class red products made entirely in Italy.

With extensive industry experience, Isotta strives to develop the highest quality products that allow photographers worldwide to feel comfortable shooting underwater. Their cameras are protected from the elements, allowing them to create unforgettable moments in the water.

on stock

Ball Joint with Plate

Ball joint of 25mm with plate and 1/4W thread.

€28.00*

on stock

Clamp Size M (50 mm)

Clamp for ball joints of 25mm and 70mm tubes, with M8 thread to insert a further ball allowing to implement an arm or an additional accessory.

€47.50*

on stock

Clamp Size S (25 mm)

Ball-head clamp for flash or buoyancy arms with a maximum diameter of 50 mm. Clamps by Isotta are characterised by particularly easy handling combined with good positional stability.

€42.50*

on stock

Float Arm 50 x 140 mm (140 g bouyancy)

Tube of 50mm diameter with 25mm balls.

€115.00*

on stock

Clamp Size L (70 mm) by Isotta

Clamp for ball joints of 25mm and 70mm tubes, with M8 thread to insert a further ball allowing to implement an arm or an additional accessory.

€53.00*

on stock

Float Arm 50 x 220 mm (290 g buoyancy)

Isotta float arms are made of robust aluminium and have 1-inch ball heads with an O-ring for good stability.

€145.00*

on stock

Float Arm 50 x 300 mm (+ 410g)

Isotta float arms are made of robust aluminium and have 1-inch ball heads with an O-ring for good stability.

€155.00*

on stock

Float Arm 70 x 150 mm (420 g Buoyancy)

Isotta float arms are made of robust aluminium and have 1-inch ball heads with an O-ring for good stability.

€140.00*

on stock

Float Arm 70 x 220 mm (670 g Buoyancy)

Isotta buoyancy arms are made of robust aluminium and have 1-inch ball heads that are fitted with an O-ring for good stability.

€155.00*

on stock

Ball head with M8 Screw

Ball joint of diam. 25mm threaded M8 with locking system.

€28.00*

on stock

Diffusor for Sony RX100 VI and VII by Isotta

Square port diffuser that spreads the camera integrated flash light. Easy and fast fitting. Usable for Sony RX100 Mark VI and VII Isotta Compact housings with a square port.

€40.00*

on stock

Double Ball Arm (45 mm, Ø 25 mm)

Tube of 25mm diameter with 25mm balls.

€38.00*

on stock

Float Arm 120 x 70 mm (330 g Buoyancy) by Isotta

Isotta float arms are made of robust aluminium and have 1-inch ball heads with an O-ring for good stability.

€135.00*

on stock

GoPro Hero12/11/10/9 Underwater Housing by Isotta

Are you looking for adrenaline even underwater and have you relied on GoPro to tackle demanding challenges? Trust us, we give you the best in terms of safety, quality and challenges. Our housing will be able to follow you up to 200 meters deep even in the coldest waters or adverse condition to show you the unexplored. Product details Isotta Underwater Housing GoPro Hero 9 Black and GoPro Hero 10 With the two raised buttons on the case, you can manage all the functions of the actioncam quickly and easily even with gloves. The two displays on the GoPro are perfectly visible thanks to the large openings protected by scratch-resistant methacrylate, shaped on the shape of the screens, and a removable rear lens hood that ensures optimal viewing of the display in any light condition or situation. ONE HAND OPEN/CLOSE The quick opening with one hand allows you to be operational in a few minutes; the rear cap detaches completely from the front body, so the inserting of the GoPro is free of obstacle. PORT The flat port on the housing have the same size of the original GoPro Hero 9 Black housing, so that you can use all the original and universal accessories. CONSTRUCTION AND SAFETY The materials used for the construction and assembly of the housing are of high quality such as anticorodal anodized aluminum and stainless steel. The double O-rings guarantee the hermetic seal of all the moving and removable parts of the housing up to a guaranteed depth of 200 meters. An hole located at the bottom allows you to secure the case with a safety strap. An upper slide and two different holes, one M6 and one 1/4 W, on the bottom support the use of various accessories. Controls Shutter button; Mode button ON and OFF Highlights All GoPro Hero9/Hero10/Hero11 key main controls Easy one hand housing open/close Double high precision and quality O-Ring seals

€540.00*

on stock

GoPro® Hero8 Black Underwater housing from Isotta

With the same attention to detail and robustness as the Isotta DSLR housings, the Isotta underwater housing for the GoPro Hero8 Black is a professional photographer's tool for underwater use. Easy access to all important camera controls, even with gloves on. The rear flap has a large window for a good view of the camera display and is completely separated from the front body; a rubber contour makes GoPro Hero8 Black camera attachment easy. A removable rear bonnet provides an excellent view of the display in any condition. Opening and closing with one hand It is very easy to open and close GoPro Hero8 Black without any effort by the user thanks to the button and the centring pins; the camera is absolutely stable and secure. Port, close-up AND wide-angle lenses The front port, which is equipped with high quality standards of materials, ensure perfect image quality. The flat housing port for the underwater housing by Isotta for the GoPro Hero8 Black has been created in the same size as the original, so you can use most of the accessories available on the market. Construction and safety Only the best materials are used in the manufacture of Isotta underwater enclosures, such as anodised aluminium, which is anti-corodal and thermally coated, and stainless steel. A durable product that requires only simple and quick maintenance by the user. Two high-precision and high-quality O-ring seals protect and ensure a perfect and safe watertightness for all moving and / or removable parts. The nominal depth is 200 metres. A hole on the bottom of the housing allows the GoPro Hero8 Black housing to be attached with a grip plate/strap. Various accessories can be mounted using the Isotta top handle or the M6 and 1/4 inch threaded holes on the bottom. Operating option GoPro Hero8 Black ON/OFF Shutter button Mode button

€540.00*

on stock

O-ring set for port B120

Spare O-ring

€21.00*

on stock

Tray with double handles

This bracket, applied under the housing, allows the use of optional accessories with the housing for Compact cameras. Thanks to the two handles, the management of the housing in the water is easier.

€145.00*

on stock

Ball head with M6 Screw

1-inch ball head adapter with M6 threaded screw

€28.00*

on stock

Cap for M16 bulkhead

€18.50*

on stock

Diffusor for Compact Housing

Round diffuser that spreads the flash light integrated in the camera. Easy and quick to mount. Useable with Isotta compact housings with round port.

€36.00*

on stock

Double Ball Arm (90 mm, Ø 25 mm) by Isotta

Tube of 25mm diameter with 25mm balls.

€40.00*

on stock

Fibre optic adaptor for TG-4/-5/-6/-7

Allows the use of one or two external flashes with fibre optics. Original small caps can be used to close a socket when only one flash is used. Useable with all matching Isotta compact housings.

€32.50*

on stock

Float Arm (180 mm, Ø 25 mm)

Flash arms from Isotta are made of robust aluminium and feature 1-inch ball heads with an O-ring for good stability.

€45.00*

on stock

Float Arm 50 x 100 mm (100 g buoyancy)

Isotta float arms are made of sturdy aluminium and feature 1-inch ball bearings with an O-ring for good stability.

€97.00*