Housing o-ring 90122

THE RED WEAPON CAMERA BRAIN The RED cinema camera system revolves around the BRAIN which houses the sensor and to which all additional components are attached. This modular approach allows the user to use only the parts they need and create a streamlined purpose-fit rig. The RED Weapon works off the DSMC2 form factor, the smallest and lightest RED BRAIN to date. Weapon BRAINS can be purchased with one of three sensors, each with unique characteristics and resolutions. Monstro 8K VV Featuring the Vista Vision full-frame 8K sensor, this is the latest RED Weapon. The 35.4MP CMOS sensor offers full frame lens coverage and over 17 stops of dynamic range. Helium 8K S35 The Helium 8K 35.4MP CMOS sensor offers Super 35 format and received the highest rating of any sensor on DxOMark. Gemini 5K S35 Gemini is RED's highest sensitivity sensor to date and offers significantly increased performance in low-light settings and improved performance in shadows. Dragon-X 6K S35 Dragon-X features the industry workhorse and award-winning DRAGON sensor, now with IPP2, delivering 6K cinematic imagery in a Super 35 format. Additional Weapon Specs All Weapon BRAINS are capable of data write speeds of 300 MB/s and are able to write simultaneously in REDCODE RAW as well as Apple ProRes or Avid DNxHR/HD allowing for a faster and more streamlined post-processing workflow. 8K offers 17x more resolution than HD and 4x more than 4K allowing for unparalleled sharpness. RED DSMC2 BRAINS can be configured to accept Canon EF, Nikon, Leica-M or PL lenses by swapping lens mounts. Changing lens mounts is as simple as removing four screws. This also gives access to the OLPF which can also be swapped. THE NAUTICAM WEAPON LT UNDERWATER HOUSING The Nauticam Weapon LT housing is the smallest, lightest, and easiest to operate underwater housing for RED Cameras available. On location, the usability of this system is unmatched. Set up and tear down in minutes, easily swap batteries and recording media while the camera is mounted in the housing, and lens changes in seconds. The small size and light weight dramatically decrease resistance in water, especially when free diving. This version of the housing uses the N120 port system which allows for the use of even the largest diameter DSLR lenses such as the Canon Ultra-Wide Zoom EF 11-24mm f/4 USM. When paired with the Monstro VV sensor the Weapon will capture the full 126º05' rectilinear field of view. EXTERNAL MONITOR SUPPORT The Weapon LT housing supports the use of optional bulkheads to support a variety of external monitors with either SDI or LEMO connectivity. With LEMO support the use of the REDTOUCH monitor is possible removing the need for monitor battery changes as was necessary with SDI monitors like the SmallHD. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with Weapon LT as standard equipment. Combined with an accessory vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. REQUIRED RED COMPONENTS: RED DSMC2 Sidekick - This allows control access within the housing. RED Lens Mount RED DSMC Canon Mount RED PL Mount if using this 16410 adaptor. Nauticam N120 Nikonos RS Lens Adaptor Battery Mount and Input/Output Adaptor RED DSMC2 V-Lock I/O Expander (All in one solution) RED DSMC2 Base Expander, plus one of the following: RED DSMC2 V-Lock Battery Module RED DSMC2 Redvolt XL Module Wooden Camera Cable-less V-Mount - This is most versatile as it allows you to mount the battery lower allowing taller batteries to fit within the housing. RED Mini-Mag SUPPORTED BATTERY CONFIGURATIONS: RED DSMC2 Redvolt XL Module Redvolt XL Battery   RED DSMC2 V-Lock I/O Expander 1 or 2 PAGLink PL96 or PL150 Batteries Switronix Hyper Core Slim IDX Endura CUE-D150 146Wh   RED DSMC2 Base Expander with Wooden Camera Cable-less V-Mount (low position) 1 or 2 PAGLink PL96 or PL150 Batteries Switronix Hyper Core Slim IDX Endure CUE-D150 146Wh RED Brick BLUESHAPE BV065-BV150 BLUESHAPE BV100HD-BV150HD BLUESHAPE BV100HD-BV150HD SPLASH BeBob V98RM Cine IDX Endura CUE-D150 146Wh SWIT S-8192S 92 +92Wh Split Style V-Mount   RED DSMC2 Base Expander with Element Technica V-Mount Module 1 or 2 PAGLink PL96 or PL150 Batteries Switronic Hyper Core Slim   RED DSMC2 Base Expander with Element Technica Gold Mount Moduler Anton Bauer Dionic HC *This list is only what has been tested and is not all encompassing.

Panasonic hybrid camera systems have revolutionized all levels of motion imaging capture. Pairing high quality interchangeable lenses with compact camera bodies, the video camera of choice for underwater filmmakers has undergone an incredible transformation in recent years. It has become the Panasonic GH5 and GH5S. An exceptional hybrid housing to complement an exceptional hybrid camera, the NA-GH5V is a video-centric version of the NA-GH5 housing that supports HDMI 2.0 output via the new M28 bulkhead. THE PANASONIC GH5 (II) AND GH5S The Panasonic GH5 is a new camera body, positioned above the successful GH4, and improving it in every way. At the core is a 20 megapixel sensor with completely revamped video functionality. When shooting motion, GH5 reads the entire 5K sensor, then resamples in camera to create each individual 4K frame. This results in increased sharpness with no change in lens angle of coverage! Panasonic didn’t stop there, unlocking UHD video capture at up to 29.97 fps with 4:2:2 10-bit chroma sub-sampling. Simply put, this means the GH5 can capture twice the color information with 64x the precision of a 4:2:0 8-bit system. The GH5S, featuring the same body as the GH5 is even more video focused than its sibling. The GH5S features an anamorphic 10.2MP sensor featuring Dual Native ISO technology borrowed from the high end VariCam that can record DCI 4K internally at up to 30fps with 10-bit 4:2:2 color and HDR Hybrid Log Gamma support. Panasonic GH5 Key Features 20MP Four Thirds sensor (no OLPF) 5-axis in-body image stabilization system with 'Dual IS 2' support All 4K footage taken using full width of sensor (oversampled from 5.1K footage) Internal 4K/30p 10-bit 4:2:2 video capture 4K/59.94p and 50p shooting with 10-bit 4:2:2 output or 8-bit, 4:2:0 internal recording Panasonic GH5S Key Features 10MP Anamorphic sensor Dual Native ISO of 400 and 2,500 DCI 4K 10-bit 4:2:2 at 30fps internal recording with simultaneous 10-bit 4:2:2 feed through HDMI out 1.8x crop factor vs 2.0x crop factor of GH5 Panasonic GH5 II The updated Venus processor allows the 203.MP sensor to record full-sensor oversampled 4K 10-bit 4:2:0 video at up to 50/60p or 4:2:2 DCI 4K at 30p/25p.  There is also the option to record at VFR DCI 4K/60p for smoother post-processing workflow.   Other notable improvements to the interface are the ability to resize the waveform exposure assistance tool and the ability to view the vectorscope when setting white balance.  The viewfinder's refresh rate has also been increased to 120hz and the LCD is 1.5x brighter with a wider color space. The GH5 II will also allow for simultaneous output over HDMI while recording internally at 4K/60p.  The NA-GH5SV is compatible with the Nauticam HDMI2.0/1.4 system to allow for the use of supported external recorders/monitors.  THE NAUTICAM NA-GH5V UNDERWATER HOUSING The NA-GH5V housing is small, but not at the expense of functionality or ergonomics. Integrated handles provide a sturdy and comfortable base to operate the system from. A sculpted shutter release lever, thumb lever for AE-L / AF-L, and well placed control dials provide the same operational feel as any Nauticam DSLR housing. Control buttons are placed within easy reach of the handles, with sufficient spacing to allow easy operation, even by feel. The NA-GH5 is a professional grade underwater housing, built with cutting edge manufacturing technology, supporting the pro-level GH5/GH5S camera bodies to its full potential. The GH5/GH5S feature four custom White Balance Presets allowing the video shooter to store settings for various depths as well as natural/artificial light scenes and switch between them quickly on a dive. Access to these presets is a breeze with the NA-GH5 mission control layout. A second thumb lever on the right side of the housing, easily accessed from the handle, brings up the white balance presets. Simply scroll to the desired preset and film away. PREMIUM PROFESSIONAL OPTICS The variety of optics solutions for the NA-GH5 are staggering. Whether you're choosing a MFT open-source standard lens such as the Panasonic 8mm Fisheye or the ultra-fast Olympus 60mm macro lens there is an N85 port system port for you. Looking for zoom-through capability and both macro and wide on the same dive? The WWL-1 and CMC wet-mate system allows for unmatched corner sharpness for your wide angle and ridiculous reproduction ratios for your macro. The bayonet mount system allows for switching underwater. TTL AND MANUAL OPTICAL STROBE TRIGGERING Add the optional Panasonic DMW-FL70 Flash inside the housing for reliable, accurate triggering of optical TTL compatible strobes. Rapid fire manual triggering is also available with the Nauticam Mini Flash Trigger. HDMI 2.0 OUTPUT The NA-GH5V housing is a version of the NA-GH5 housing that features the M28 bulkhead connection that supports HDMI 2.0 connections for use with the NA-NinjaV housing for the Atomos Ninja V recorder. This allows for 4K 60p 10-bit 4:2:2 output and recording. The standard NA-GH5 housing supports up to HDMI 1.4.   INTEGRATED TRIPOD MOUNTS The NA-GH5 has integrated mounting points on the bottom for industry standard 1" ball-mounts that can be used to attach tripod legs.

With the Canon EOS R, underwater photographers not only get a full-frame mirrorless camera with Canon's Dual Pixel autofocus and the ability to use the EF-S range with an adapter, but also the new RF mount, which enables new lenses with groundbreaking features. The EOS R features a 30.3 MP full-frame CMOS sensor with the new RF lens mount and a 3.7-million-dot electronic viewfinder. The Canon EOS R Camera The Canon EOS R is remarkable not only because it is Canon's first full-frame mirrorless camera, but also because of the many additional features available with the introduction of the RF lens mount. The RF lens mount has the same large diameter of 54mm, but the ability to use larger rear lens elements that are closer to the sensor increases the sharpness in the corners and at the outer edge. The lenses can also be more compact than lenses with the same coverage area in the EF mount. The addition of 4 more lens communication pins to a total of 12 pins expands the functionality of the lenses. RF lenses feature a customizable control ring that will also be available on one of the two EF mount lens adapters and can be assigned to control various exposure settings. On the RF lenses, manual focus is now controlled electronically, which allows the direction of rotation of the lens' manual focus ring to be changed. The EOS R is also able to use the wide range of EF-mount lenses üvia three optional adapters: a simple EF-to-R adapter, an adapter that supports the customizable control ring, and another that offers a drop-in filter port. The features that have made Canon DSLR and Cinema cameras favorites of underwater photographers are also present in the EOS-R, including powerful and precise Dual Pixel autofocus and 4K Canon Log video recording üvia the large 30.2MP CMOS full-frame sensor. Important Camera Specifications 30.3MP CMOS full-frame sensor 8fps continuous shooting 4K UHD recording at up to 30 frames per second All-I ISO 100-40,000   The NA-R underwater gear from Nauticam. The NA-R underwater gear embodies Nauticam's drive for innovation. Both the Canon EOS R and Nikon Z-7/6 cameras offer photographers the ability to use available äolder lenses üvia an adapter in addition to the original optics.  For many, the EOS R is a transition from a Canon full-frame DSLR. To support both conventional and original lenses, Nauticam has integrated the NA-R into the N120 port system.. Use lenses with RF or EF mounts - with the same port system. Canon's EF-to-RF adapters can be attached to the camera before insertion into the housing.  When using the EOS R inside the housing with the adapter and a supported EF lens, the port and port extension are identical to the same arrangement on a Nauticam Canon N120 DSLR. As the range of RF lenses evolves, dedicated port and port extension combinations will be listed in the port overview.   Two lens release buttons, one for RF lenses and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to facilitate lens removal through the portöopening.   Controls. Nauticam engineers are obsessed with giving the photographer unobstructed access to all necessary controls underwater, with as many as possible within easy reach of the ergonomically rubberized grips.  This mission control philosophy extends to the NA-R, which features a dual thumb lever and dual sub-lever on the right grip.   The thumb lever activates the "AF-On" buttons and the lower one activates the "Info" buttons, while the lower lever corresponds to the "M-Fn" and "Record" buttons.  Next to the left grip is a thumb lever for "Playback" as well as a dedicated switch for switching from LCD to EVF.   Large, knurled and rubberized knobs access the camera's "main"and "sub"command controls.  The two-stage off"ser enables smooth focus and off"activation. Additional buttons for "Menü", "focus point selection" and others are also "easily accessible via the handles.. An additional control wheel is located on the left side of the housing and connects to the control ring on the supported EF to EOS R mount adapter with control ring üvia the optional gear (NA19561). Flash triggering Flash output is via one of two optional flash outputs, a manual LED output (NA26301) or a TTL flash output (NA26321), which use the built-in fiber optic ports with optional fiber optic cables to output supported flash units. For control of flashes that do not support fiber-optic flash output, a variety of older flash sockets are available. Video üvia HDMI  The EOS R is capable of outputting a 10-bit 4K UHD (3840 x 2160) 30p video signal üvia HDMI.  When combined with the optional standard M16 HDMI jack (NA25033) and HDMI (D-C) 190mm cable (NA25036), the NA-R can be used in conjunction with an external monitor or recorder such as the SmallHD 502B or Ninja Inferno in their respective Nauticam housings. Vacuum test and leak detection system  The NA-R is supplied with the electronics as well as the M16 II vacuum valve for vacuum testing and the leak detection system. This simple system makes it possible to check the waterproof integrity of the housing before the dive and to monitor it continuously throughout the dive. The Nauticam system is temperature compensated, eliminating false alarms caused by a  change in external temperature or by heating a camera during an action-packed dive.

FUJIFILM X-T3 The Fujifilm X-T3 features an APS-C CMOS 4 X-Trans 26.1MP Sensor. The X-T3 is powered by an upgraded X Processor 4 that is 3x faster and allows for 1.5x faster sensor readout than the X-T3. The base ISO has been lowered from 200 to 160. Oversampled DCI or UHD 4K (using full sensor width) is possible at 30p whereas 60p can be recorded with a minor 1.18x crop. The 60p footage can be captured as 10 bit 4:2:0 H.265 at 200 Mbps and recorded internally. This increases to 4:2:2 when output over HDMI. The X-T3 also features F-Log capture to maximize dynamic range, protecting highlights and shadows for editing. The X-T3 features a Natural Liveview mode when recording F-log that more closely resembles a standard monitoring LUT. Zebra warnings and focus peaking overlays as well as magnification during shooting are all improvements that video shooters will appreciate. Three custom white balance slots are available in addition to the 7 presets. The electronic viewfinder of the X-T3 is vastly improved with 3.69M dots as compared to the 2.36M dots of the X-T2. Battery life has also been improved. The X-T3 can achieve 20fps continuous shooting with Autofocus and this increases to 30fps when shooting from a 1.25x crop area. A Sport Finder mode will show this cropped area inside the EVF. Phase-detection autofocus has been increased to 98% of the sensor area. The X-T3 also features a fast 1/250 X-sync speed. Key Camera Specifications 26MP BSI 'X-Trans CMOS 4' sensor 425-point hybrid AF system 20 fps shooting with AF (11 fps with mechanical shutter) 3.69M-dot electronic viewfinder 10 bit 4:2:0 H.265 internal video capture (4:2:2 over HDMI) UHD/DCI 4K/60p from 1.18x crop region UHD/DCI 4K/30p using full width of sensor Internal F-Log capture Dual UHS-II SD card slots USB C-type connector can be used for charging battery THE NAUTICAM NA-XT3 UNDERWATER HOUSING Nauticam has supported X-T1 and X-T2 cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT3. More than just an updated badge, the NA-XT3 is a complete redesign of the series. With a form factor more closely resembling the NA-A9 for Sony's A9 mirrorless camera, the NA-XT3 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles. An optional hand strap (NA28130) can be added to the handles. The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot. The NA-XT3 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-L control. The housing includes two M14 and one M24 bulkhead openings and an M5 threaded hole on top (underneath the cold shoe) for an additional ball mount. The NA-XT3 uses the N100 Port System shared with the Fujifilm XH1 system. A selection of port options are available for a variety of lenses. VIDEO RECORDING FEATURES The impressive video specs of the X-T3 prompted the addition of some video-centric features to the NA-XT3. The base of the housing can accept Nauticam's Mounting Ball Set for Tripod (PN 25218), the same part as for the NA-A9. As the X-T3 can output DCI/UHD 4K at 60p with 4:2:2 quality over HDMI, a new M24 bulkhead has been incorporated into the housing to support an HDMI 2.0 connection to the Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player (17922). Video shooting can decrease battery life so the NA-XT3 is compatible with an optional 2500 mAh USB-C Battery Pack (NA36335) that sits below the camera tray inside the housing. FLASH TRIGGERING Reliable automatic flash exposure is available with the NA-XT3 and a variety of optically fired flashes, precisely reproducing the camera’s included EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood! The NA-XT3 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (PN 26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain. The NA-XT3 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (NA26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT3 as standard equipment. Combined with an optional M14 Vacuum Valve II (NA25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing.Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.

Nauticam Epic LT mit Extended Battery Back (N120-Port, Dual PagLink PL96 und RedTouch 5 Zoll LCD ) Die volle Ausnutzung der Vorteile der unglaublichen RED Epic und Scarlet Kinokameras unter Wasser erfordert ein ebenso unglaubliches Gehäuse.  Die Nauticam Epic LT basiert auf dem Port-System N120, das über ein Dutzend Canon EF-Objektive unterstützt. Der Epic LT wiegt unter 7 kg und sein kleiner Formfaktor bedeutet, dass er buchstäblich in einen Rucksack passt, der unter den Sitz vor Ihnen passt.  Das gesamte Epic LT System ist in wenigen Minuten aufgebaut!  Eine oben montierte Arri-Schwalbenschwanzplatte, mit der die Kamera im Gehäuse montiert wird, und eine Zwischenschnittstelle zwischen dem SWITCHBLADE Module und dem Gehäuse.  Die Bedienelemente müssen bei der Installation der Kamera nicht voreingestellt sein, und die Kamera kann sogar mit der Schnellwechselplatte von Red auf der Unterseite montiert werden. Mehr Energie, mehr Zeit Diese Version des Epic LT-Gehäuses wurde entwickelt, um sich nahtlos in gestapelte PAGLink PL96-Batterien zu integrieren, die sich bei der Nauticam-Anwenderbasis bewährt haben. integrierter REDTouch 5-Zoll-LCD Monitor Der Epic LT (16106) bietet Platz für den REDTouch 5" LCD-Monitor im Inneren des Gehäuses und ist durch ein Fenster auf der Rückseite des Gehäuses sichtbar, das einen abnehmbaren Schirm beinhaltet.  Der Monitor befindet sich im hinteren Teil des Gehäuses und schwenkt beim Öffnen des Gehäuses aus dem Weg, um einen ungehinderten Zugang zu den Batterien und Monitorverbindungen zu ermöglichen. Integriertes Vakuumprüf- und Lecksuchsystem Das Vakuumprüf- und Lecksuchsystem Nauticam wird standardmäßig mit Epic LT geliefert.  In Kombination mit einem zusätzlichen Vakuumventil liefert dieses Überwachungssystem ständig aktuelle Informationen über den wasserdichten und sicheren Tauchzustand des Gehäuses.  Ein einfaches, farbcodiertes LED-Beleuchtungssystem zeigt dem Benutzer an, dass das Vakuum fest ist oder dass das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt. Das Nauticam-System ist temperaturkompensiert und eliminiert Fehlalarme, die durch eine Änderung der Außentemperatur oder durch die Erwärmung einer Kamera bei einem actionreichen Tauchgang verursacht werden.

The Z 7II and Z 6II, Nikon's next generation full-frame mirrorless cameras, offer underwater shooters the same legendary Nikon sensors with improved autofocus and continuous shooting speed performance. The NA-Z7II supports both the Z 7II and Z 6II models and features the larger-bore M28 bulkhead that supports HDMI 2.0 connections needed for the Atomos Ninja V Recorder/Monitor. THE NIKON Z 6II AND Z 7II CAMERAS For many full-frame Nikon shooters the appeal of a mirrorless camera had been tempered by the thought of having to invest in and master a new system by moving to another ecosystem such as Sony. For those awaiting a mirrorless system that utilized Nikon imaging technology and ergonomics, the wait is over. The Z 6II and Z 7II cameras feature an identical body, differing only in their feature sets, an ideal feature when it comes to housing the camera for underwater use.  Each camera also features dual EXPEED 6 image processor to significantly improve autofocus and continuous speed shooting.   Both camera bodies are built around Nikon's Z-mount. With an incredibly wide 55mm mount diameter (17% larger than F-mount) and very short flange distance, the Z-mount is able to offer a maximum aperture of F0.95. While the current range of Z-mount lenses continues to grow, almost the entire line of F-mount lenses is usable with the optional Nikon FTZ Adapter. When using the adapter, even non VR lenses benefit from the camera's in-body stabilization. VR and Z-Mount lenses receive 5-axis stabilization whereas non-VR F-mount lenses have access to 3-axis stabilization. There is also a dedicated e-VR (electronic VR) that combines optical and electronic stabilization for video shooting. Both the Z 6II and Z 7II will be able to capture internal UHD 4K at 60fps or 1080 HD at up to 120fps.  The Z 6II will be able to record 4K/60P early in 2021 through an expected firmware update.  In addition to N-Log, both cameras also feature HLG (hybrid-log gamma for HDR) which work in 10-bit 4:2:2 over HDMI 2.0 to an external recorder such as the Ninja V.   The OLED electronic viewfinder (EVF) of both the Z 6II and Z 7II gives 100% frame coverage at Quad-VGA (3.69M dot) resolution. When triggering external flashes, both cameras feature a 1/200 X-sync shutter speed. THE NIKON Z 7II CAMERA The Z 7II features a high resolution 45.7MP FX-format sensor that can shoot at up to 10FPS. The Z 7II features a wide ISO range of 64-25,600. Autofocus is achieved with 493 on-sensor AF points that cover 90% of the frame and the camera intelligently switches between contrast-detection and phase-detection points to achieve accurate focus regardless of light conditions. KEY CAMERA SPECS: 45.7MP FX Format Sensor with no OLPF 10 FPS continuous shooting 64-25,600 ISO Range UHD 4K 60p recording with 1.08x crop 10bit UHD 4K N-log output via HDMI with start/stop support 5-axis VR stabilization (with Z lenses) 3.69M-dot EVF, 3.2" 2.1M-dot rear screen -3EV focusing with F2.0 lens 1 CFExpress / XQD card slot, 1 UHS-II SD card slot THE NIKON Z 6II CAMERA The Z 6II is equipped with a 24.5MP FX-format sensor capable of up to 14FPS continuous shooting with an ISO range of 100-51,200. Video is currently recorded internally at up to UHD 4K 30p.  UHD 4K 60p with a 1.6x crop will be available in early 2021 through a firmware update. 273 on-sensor focus points cover 90% of the fame and the Z 6II intelligently switches between contrast-detection and phase-detection points to assure accurate autofocus. KEY CAMERA SPECS: 24.5MP FX Format Sensor with OLPF 14 FPS continuous shooting 100-51,200 ISO Range Full Sensor UHD 4K 30p  UHD 4K 60p recording with 1.6x crop (firmware update early 2021) 10bit N-log UHD 4K output via HDMI with start/stop support 5-axis VR stabilization (with Z-mount lenses) 3.6m-Dot OLED Electronic Viewfinder Two card slots (1x CFexpress/XQD, 1x UHS-II SD) THE NAUTICAM NA-Z7II UNDERWATER HOUSING The NA-Z7II underwater housing follows suit with Nauticam's drive for innovation. Both the Nikon Z 6II and Z 7II present shooters with the ability to use both the available legacy F Mount lenses via the FTZ adapter in addition to their native Z Mount optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-Z7II into the N120 port system.  This is critical as the new Z mount lenses are being phased in over the next few years. The Nauticam NA-Z7II housing features two lens release buttons that correspond to either F or Z mount lenses. When switching between F and Z mount lenses, the camera must be removed from the housing to remove the adapter. When working within either the F or Z mount system use the appropriate lens release button to switch lenses without having to remove the camera from the housing. A vacuum system reset switch is located below the tray as well so there is no need to open the rear of the housing during lens or port changes. The NA-Z7II is part of the N120 port system which allows for full support of Nikon F mount lenses with the same ports needed for their application on Nikon SLR housings. As more Z mount lenses become available Nauticam will add supported configurations. INTELLIGENT CONTROL PLACEMENT Nauticam engineers are obsessed with functionality and this is evident in the location of essential controls. Regardless of where the control is located on the camera, the Nauticam housing puts them where you need them to be underwater. For those switching between photo and video modes, an easily reachable switch is located on the right rear of the housing. The right side double thumb lever, easily reached from the right handle features access to the AF-on and Record buttons respectively. Between the double thumb lever and the multi-stage shutter release is an ISO lever allowing quick changes to sensitivity. The left double thumb lever accesses the DISP and Playback controls. The Zoom In and Zoom Out controls, located on the right rear of the camera body is relocated to the left side of the housing to a location more familiar to Nauticam housing users. The switch that allows for switching between the LCD display and the EVF, a crucial and much used control with mirrorless systems is located close to the left handle within easy reach. Front and rear control dials are readily accessible by the familiar large knurled dials at the right handle. The ergonomic housing handles are rubberized and feature stainless steel stiffening brackets to ensure a stable platform when using large strobes or video lights attached to the pre-installed 1" mounting balls. FLASH TRIGGERING The NA-Z7II comes with Nauticam's self powered manual flash trigger preinstalled. The flash trigger plugs into the hot-shoe of the camera and uses LED lights recessed into each of the two optical bulkheads to trigger supported underwater flashes when used with the correct fiber optic connection. The flash trigger is powered by coin cell batteries that provide thousands of flashes per battery. The flash trigger can be upgraded to support TTL triggering (PN 26308 TTL Converter for Nikon). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-Z7II as standard equipment. Combined with an accessory M16 vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-Z7II uses the same N120 Port System as the previous NA-Z7 which makes for a seamless transition for those upgrading to the "II." While this system provides exceptional optical-glass and flat port solutions for a wide variety of F and Z Mount lenses, the real power of the Z 6II and Z 7II can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6. The SMC-1 and SMC-2 macro wet-optics, when used with the Nikon 105mm f/2.8G VR macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 105mm lens itself can achieve in air without a magnifier.

Die wichtigsten Kamerasteuerungen sind von den ergonomischen, gummierten Griffen aus leicht erreichbar.  Eine unglaubliche Anzahl von Entwicklungsressourcen gehen in die Gestaltung dieses Designs ein, aber dieser Aufwand zahlt sich mit einer beispiellosen Benutzerfreundlichkeit aus. Die Bedienelemente am Gehäuse sind genau dort platziert, wo sie für den einfachsten Zugang im Wasser sein sollten, unabhängig vom Kamerabau. Ein großer, geformter Auslösehebel befindet sich am rechten Griff für die Zeigefingerbedienung und verfügt über einen patentierten Zahnradmechanismus, der die Empfindlichkeit für das taktile Gefühl von halb und voll gedrücktem Auslöser verbessert. Um den Autofokus der Rücktaste zu erleichtern, wird die AF/AE-Sperrtaste (die zum Aktivieren des AFs neu zugewiesen werden kann) durch einen Daumenhebel in der Nähe des rechten Griffs gesteuert. Kein anderes Gehäuse kommt an diese Art von ergonomischem Zugang zu diesen kritischen Bedienelementen heran. Das Gehäuse-Verriegelungssystem hat weltweit Anerkennung für seine Einfachheit und Funktionalität gefunden. Diese eingelassenen Verschlüsse sind mit Sicherheitsverriegelungen ausgestattet, reduzieren das Volumen und erfordern minimale körperliche Anstrengung beim Ver- und Entriegeln. Portänderungen waren noch nie so einfach wie mit dem patentierten Nauticam Portverschlusssystem. Kein Kampf, kein Verdrehen, keine Fehlausrichtung - nur Einsetzen und Verriegeln. Der Objektivwechsel ist auch ohne Demontage der Kamera aus dem Gehäuse über die Objektiventriegelungstaste, die logisch an der Gehäusefront zugänglich ist, einfach durchzuführen. Stativbefestigungspunkte Die Befestigungspunkte für drei 1-Zoll-Kugelköpfe nach Industriestandard werden direkt in den Gehäuseboden eingearbeitet, so dass keine anderen Zubehörhalterungen zur Befestigung von Stativbeinen erforderlich sind. Optische Sucher Der standardmäßige optische Glassucher ist sehr gut und reisefreundlich, aber viele Fotografen bevorzugen die Erleichterungen eines vergrößerten Suchers mit einstellbaren Dioptrien. Nauticam produziert einen "geraden" 180º vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht eine persönliche, gestochen scharfe Anpassung unter Wasser. Sucherwechsel können in weniger als 30 Sekunden ohne Werkzeug durchgeführt werden. Außergewöhnliche Zusammensetzung und Fokusgenauigkeit waren noch nie so zugänglich. Hochwertige, professionelle Optik Erfahrene Fotografen wissen, dass eine Kamera nur so gut ist wie das Objektiv vor ihr, und das Gleiche gilt für die Wahl der Optik für ein Unterwasserkamerasystem.  Eine Vielzahl von Weitwinkel- und Flachports sind im N85-System verfügbar, um einen großen Teil der Micro Four Thirds Open-Standardobjektive aufzunehmen. Die Konfigurationen werden bei Nauticam ausführlich getestet, um die ideale Verlängerungsringlänge für beste Leistung zu bestimmen.

Das neue NA-D7500 Gehäuse erweitert die marktführende ergonomische Erfahrung der Nauticam-Gehäuse mit verbesserter Platzierung der Steuerungen in einem kompakten, leichten Gehäuse, das mit modernsten Fertigungsverfahren hergestellt wurde. Der rechte Griff ist die zentrale Steuerung für die D7500 Kamera, die auf viele der häufig verwendeten Kamerafunktionen zugreift.  Überdimensionale Hebel sind am Griff erkennbar und ermöglichen eine taktile Bedienung während der Aufnahme mit dem optischen Sucher.  Die am häufigsten aufgerufenen Fingerspitzenbedienelemente (Auslöser, Hauptbefehlswahlschalter und Unterbefehlswahlschalter, Videoaufnahme und AE-L/AF-L) befinden sich hier. ISO, die primäre Belichtungssteuerung für DSLR-Videokameras, wird über einen praktischen Daumenhebel unter dem rechten Griff erreicht. INFO, das zum Abrufen der Kameraeinstellungen auf dem 3,2"-Rückseiten-Farb-LCD dient, befindet sich auf dem linken Daumen. Ein Hebel für den kleinen Finger, der sich direkt unter dem vorderen Einstellrad befindet, greift auf die Taste Fn1 zu.  Diese kann mit einer Reihe von zuweisbaren Funktionen verknüpft werden. Der neue AF-Mode Lever ist eine deutliche Verbesserung, die auf dem Feedback der Nauticam-Kunden aus der Praxis basiert.  Die Nikon AF Area Modi sind so leistungsfähig geworden, dass die Fotografen regelmäßig zwischen 3D Tracking, Auto Area AF und Single Area Modi wechseln.  Der AF-Modus-Hebel ist nun leicht zu finden, indem man ihn am linken Griff fühlt!  Ein separater AF-M-Hebel ist über diesem Hebel positioniert und fühlbar erkennbar. Ein doppelter Daumenhebel öffnet die Wiedergabe und die INFO-Taste.  Die Nikon D7500 Kamera im Nauticam NA-D7500 Gehäuse bietet zwei zuweisbare Drucktasten (AE-L/AF-L und Fn1), die alle über die Gehäusegriffe zugänglich sind.  Diese benutzerdefinierten Funktionen können zunächst überwältigend sein, aber die kreativen Optionen, die sie freischalten, können im Praxiseinsatz unglaublich wertvoll sein.  Kurz gesagt, diese zuweisbaren Tasten bedeuten weniger Zeitaufwand beim Durchsuchen der Kameramenüs, um die Kamerafunktionen zu ändern, und mehr Zeit beim Erfassen der Szene, wenn sie sich entfaltet.  Es gibt keinen richtigen Weg, diese Systeme zu konfigurieren.  Jeder Fotograf und jedes Aufnahmeszenario hat individuelle Anforderungen.  Einige Ideen sind unten aufgeführt: Mein Menü, ein benutzerdefiniertes Bedienfeld mit häufig aufgerufenen Menüeinstellungen. Auf Top Item in MEIN MENÜ zugreifen, springt tatsächlich in eine häufig aufgerufene Untermenüstruktur für die Auswahl Mein Menü auf der obersten Ebene und spart mindestens zwei Tastendrücke (d.h. minimale Verschlusszeit im automatischen ISO-Modus, oder schnell einen voreingestellten Weißabgleich definieren). Rufen Sie schnell einen anderen Messmodus auf, indem Sie zwischen dem ausgewählten Messmuster und einem alternativen Messmuster umschalten, das der aktuellen Szene besser gerecht wird. Blitz deaktivieren/aktivieren, das ist eine große Sache!  Schaltet externe Blitze ein und aus und ermöglicht so die Umschaltung zwischen Kunstlichtaufnahmen (Serienaufnahme durch Blitzverarbeitung begrenzt und Verschlusszeit durch die maximale Synchronisationsgeschwindigkeit bei 1/250) und Silhouettenmodus unter ausschließlicher Verwendung von Umgebungslicht (volle 8 fps Serienaufnahmezeit, uneingeschränkte Blitzsynchronisation).  Externe Blitzauslösung Der Popup-Blitz der D7500-Kamera löst im Inneren des NA-D7500-Gehäuses aus, und optische TTL-kompatible Blitze, die über Glasfaserkabel verbunden sind, ermöglichen eine manuelle und TTL-Blitzbelichtung.  Optische Systeme mit Glasfaserkabeln, die die externen Blitze mit dem Gehäuse verbinden, sind weitaus zuverlässiger als jedes elektrische Synchronkabelsystem.  Es gibt keine Verbindungen, die fluten können oder zerbrechliche Drähte, die brechen könnten, und fast jeder beliebte Unterwasser-Blitz unterstützt die optische Auslösung. Der optionale Blitzauslöser für Nikon (kompatibel mit NA-D7100, D7200, D7500), PN 26304 kann mit vollen 8 Bildern pro Sekunde auf die Kamera feuern und ist somit die ideale Lösung für die schnelle und schnelle Aufnahme, die die D7500 jetzt ermöglicht.  Die Verwendung dieses Auslösers anstelle des Pop-Up-Blitzes ermöglicht eine schnelle Blitzaufnahme, mit dem zusätzlichen Vorteil einer längeren Akkulaufzeit der Kamera.

The Panasonic GH5 brought high-end video specs to the micro four thirds platform, setting the bar for what was possible in this compact form-factor. Since the GH5, the open-source MFT actor has grown, with a massive variety of lenses available and camera specifications that rival or exceed some of their larger siblings. The GH6 follows closely in the GH5's footsteps, adding incredible new video features and even some notable still image enhancements. The GH5, GH5s, and GH5II have been well represented in the underwater imaging space and the arrival of the GH6 is sure to be met with serious enthusiasm given the spec sheet and early reviews. The Panasonic GH6 Camera The GH6 is built around a brand-new 25MP CMOS sensor paired to Panasonic's Venus processor. The new sensor, assisted by the addition of a CFExpress B card slot and a built-in cooling fan, can capture up to 5.7K video in the edit-friendly ProRes codec. While ProRes is currently limited to the 17:9 full 5.7K at 29.97p frame-rate recording mode, future firmware updates promised expanding this to all 4K and HD modes as well. While not in ProRes, the GH6 can record 10-bit 4:2:0 DCI or UHD 4K at up to 120fps using LongGOP H.264 compression. Dropping that frame rate to 60p allows for 4:2:2 chroma subsampling, All-i recording at a heavy 800Mbps bitrate. If 120fps is not slow enough, switching to HD opens up the possibility of 10-bit H.264 video at 240fps and even up to 300fps using Variable Frame Rate (VFR) mode which does not allow for audio recording. The menu for the various recording modes can be filtered to ease finding your desired mode and a personalized menu or 'My List' of selected modes can be created. When shooting at 60fps or lower, the GH6's Dynamic Range Boost mode can be activated. This mode uses both a low-gain and high-gain simultaneous readout from the sensor to create a final image with up to 13-stops of dynamic range. The GH6 also features Panasonic's full V-log profile which maximizes dynamic range for post-processing. The GH5 model only had a limited version of this profile. With a full-size HDMI port, the GH6 plays well with external monists and recorders, outputting a clean 4K/60p signal. Future firmware updates promise 4K/120P RAW output over HDMI. Not just a video camera, the GH6 also has notable improvements for still imaging. A new handheld mode for the high-resolution 100MP imaging mode expands the situations in which this can be used as previous versions required a tripod. For both stills and video, improvements in Autofocus and lower noise levels promise even better performance and image quality than was found in the GH5. Controls such as the prominent Record button remain similar aside from a button that gives direct access to the camera's audio settings and an additional custom function button on the front of the camera. The screen receives a refresh, as does the electronic viewfinder. THE NAUTICAM NA-GH6 UNDERWATER HOUSING The NA-GH6 builds on the pioneering NA-GH5 which supports the GH5, GH5S and GH5II camera models. Designed around the N85 Port System, the range of lens and port combinations for the NA-GH6 is unparalleled. Image quality can be improved even further with Nauticam's lineup of water-contact optics. These lenses, such as the WWL-1 and WWL-1B are designed to increase field-of-view, maximize corner sharpness and close-focus capability, all while maintaining zoom-through functionality. Using our unique bayonet mount system, these ultra-wide lenses can be switched for the powerful CMC-1 and CMC-2 macro optics underwater. This system makes the NA-GH6 the perfect underwater imaging system for both stills and video allowing for unparalleled wide and macro performance on the same dive without compromising image quality. MISSION CONTROL Designed with our Mission Control philosophy, the controls of the NA-GH6 are placed where they are needed most with essential controls for exposure and focus located within easy reach of the handles. A dual thumb lever near the right handle provides easy access to the 'REC' and 'AF-ON' buttons. A dual-action lever that triggers the 'Fn1' and 'Fn2' buttons is easily reached forward of the right handle as well. HDMI VIDEO OUTPUT With an M24 bulkhead and an M10 threaded mount, the NA-GH6 is easily paired with an external monitor or recorder over HDMI 2.0 or 1.4. With future firmware updates promising RAW video output at up to 4K/120p over HDMI, the NA-GH6 will be ready to meet that Need. MANUAL OPTICAL STROBE TRIGGERING Rapid fire manual triggering is available with the 26309 Mini Flash Trigger.  The Panasonic DMW FL-70 Flash Unit is not compatible with the GH6.   VACUUM CHECK AND LEAK DETECTION SYSTEM The NA-GH6 underwater housing by Nauticam comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

The X-T4, Fujifilm's latest APS-C mirrorless hybrid camera, adds a list of significant upgrades when compared to its predecessors.  Some of the most noticeable improvements are in-body stabilization, battery life, and auto focus tracking performance. As still/video hybrids become more popular, Fuji is offering a 26MP, high-resolution electronic viewfinder camera that can record internal 10 bit 4:2:0 H.265 DCI/UHD 4K video or 4:2:2 over HDMI as well as shooting an impressive 20fps of continuous stills. FUJIFILM X-T4 The Fujifilm X-T4 features an APS-C CMOS 4 X-Trans 26.1MP Sensor. The X-T4 is powered by a proven X Processor 4 which provides fast performance and improved responsiveness. Newly added in-body stabilization delivers up to a 6.5EV benefit which is a significant addition for video shooters.  The improved autofocus tracking system now considers color and shape as well as distance information, providing a noticeable improvement over the X-T3.   Oversampled DCI or UHD 4K (using full sensor width) is possible at 30p whereas 60p can be recorded with a minor 1.18x crop. The 60p footage can be captured as 10 bit 4:2:0 H.265 at 200 Mbps and recorded internally. This increases to 4:2:2 when output over HDMI. The X-T4 also features F-Log capture to maximize dynamic range, protecting highlights and shadows for editing. New to the X-T4 is F-Log View Assist which applies a gamma correction to the EVF and LCD, helping to visualize the end result.  Zebra warnings and focus peaking overlays as well as magnification during shooting are all features that video shooters will appreciate. Multiple custom white balance slots along with presets are easily accessible.   Key Camera Specifications 26MP BSI 'X-Trans CMOS 4' sensor In-body image stabilization up to 6.5 EV benefit 20 fps shooting with AF (15 fps with mechanical shutter) 3.68M-dot electronic viewfinder 10 bit 4:2:0 H.265 internal video capture (4:2:2 over HDMI) UHD/DCI 4K/60p from 1.18x crop region UHD/DCI 4K/30p using full width of sensor Internal F-Log capture Dual UHS-II SD card slots USB C-type connector can be used for charging battery New NP-W235 battery THE NAUTICAM NA-XT4 UNDERWATER HOUSING Nauticam has supported X-T1, X-T2, XH-1 and XT-3 cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT4. More than just an updated badge, the NA-XT4 is redesigned and considerably smaller than its NA-XT3 predecessor.  The NA-XT4 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles. The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot. The NA-XT4 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-ON control. The housing includes two M14 and one M24 bulkhead openings to accommodate a variety of accessories. The NA-XT4 uses the N100 Port System shared with the Fujifilm XH1 and XT3 system. A selection of port options are available for a variety of lenses. VIDEO RECORDING FEATURES The impressive video specs of the X-T4 prompted the addition of some video-centric features to the NA-XT4. The base of the housing can accept Nauticam's Mounting Ball Set for Tripod (PN 25218). As the X-T4 can output DCI/UHD 4K at 60p with 4:2:2 quality over HDMI, a new M24 bulkhead has been incorporated into the housing to support an HDMI 2.0 connection to the Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player (NA17922).  An M24 Adaptor for HDMI 2.0 Cable (NA25086) is required when using the Nauticam Ninja V housing.   FLASH TRIGGERING Reliable automatic flash exposure is available with the NA-XT4 and a variety of optically fired flashes, precisely reproducing the Fujifilm EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood! The NA-XT4 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (NA26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain. The NA-XT4 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (NA26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT4 as standard equipment. Combined with an optional M14 Vacuum Valve II (NA25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing.

Die NA-D7200 ist das neueste in einer Reihe von Gehäusen für die Nikon D7000, D7100 und jetzt D7200 Kameras, beginnend mit der ursprünglichen NA-D7000 Gehäuseversion im Jahr 2010. Tatsächlich ist dies das 5. Gehäuse dieser Serie, ganz zu schweigen von einigen laufenden Verbesserungen im Laufe der Zeit. Dies alles ergibt ein unglaublich raffiniertes Gehäuse, das sich ideal eignet, um die D7200 in die Unterwasserwelt zu bringen. Einige mögen sich fragen, warum überhaupt ein spezielles Gehäuse für die D7200 herstellen? Schließlich teilen sich die D7200 und die D7100 die gleichen physikalischen Abmessungen, und die D7200 funktioniert im NA-D7100 Gehäuse einwandfrei. Die Antwort ist einfach... Nauticam hat das Gehäusedesign weiter verfeinert. Das NA-D7200 beinhaltet die neuesten Innovationen der Nauticam-Gehäuselinie, einschließlich einer Gewichtsreduzierung (15% leichter als das ursprüngliche D7100-Gehäuse), die es ermöglicht, das Rigg neutral schwimmfähig zu machen, eine verbesserte Ergonomie und die berühmte Elektronik des Nauticam Vacuum Check System. Das Gehäuse beinhaltet auch einen neuen Fn-Bedienhebel und eine aktualisierte Kamera-Plattenbefestigung. Das Nauticam Port-Verriegelungssystem ist zu einer Ikone geworden; einfach zu bedienen und doch sicherer als die meisten Methoden zum Befestigen von Ports. Kein Verdrehen erforderlich, einfach drücken und verriegeln. Kümmern Sie sich weniger um das Befestigen des Ports, sondern konzentrieren Sie sich darauf, großartige Bilder zu erhalten. Das patentierte Multi-Controller-Pad, das sich in Reichweite des rechten Daumens befindet, bildet den Nikon D7200 Multi-Selektor virtuell nach und ermöglicht die vollständige multidirektionale Nutzung dieses leistungsstarken Tools, einschließlich in der Diagonalen. Kein anderer Hersteller hat dies.  Die gummierten Griffe von Nauticam sind ein weiteres Merkmal dieses Gehäuses. Ein komfortabler, sicherer Griff, der die Ermüdung der Hände reduziert und zur Stabilisierung der Aufnahme beiträgt. Die Nauticam Gehäuseverriegelungen ermöglichen einen sicheren und dennoch einfachen Zugang zu Batterien oder Speicherkarten. Warum sich beim Versuch, ein Gehäuse zu öffnen, die Knöchel brechen? Objektive sind der Schlüssel zu großartigen Bildern. Die meisten Glas- und Acrylports, die für jedes Unterwasserkameragehäuse verfügbar sind, sowie die verriegelbaren Portverlängerungen bedeuten die meisten unterstützten Objektive im Markt.

Nauticam war Vorreiter bei zahlreichen technischen Durchbrüchen in früheren Gehäusen, die heute bei der NA-D7100 Standard sind. Das patentierte Gehäuse Locking Latch System wird weltweit für seine Einfachheit und Funktionalität geschätzt. Diese eingelassenen Verschlüsse sind mit Sicherheitsverriegelungen ausgestattet, reduzieren das Volumen und erfordern minimale körperliche Anstrengung beim Ein- und Ausrücken. Portänderungen waren noch nie so einfach wie mit der patentierten Nauticam Lock Port Release. Kein Ringen, kein Verdrehen, keine Fehlausrichtung - nur Sitz und Schloss. Der Objektivwechsel ist auch ohne Demontage der Kamera aus dem Gehäuse über die Objektiventriegelungstaste, die logischerweise an der Gehäusefront zugänglich ist, einfach durchzuführen. Die leichten, robusten Nauticam-Griffe sind großzügig konturiert mit einem langlebigen Überformprozess aus komfortablem, rutschfestem Gummi. Objektivunterstützung: Nauticam glaubt fest daran, dass jedes Objektiv, das sinnvollerweise unter Wasser verwendet wird, unterstützt werden sollte. Nauticam prüft sorgfältig neue Objektive und bietet auch die branchenweit einzigen verriegelnden Zwischenringe in jeder potenziell benötigten Größe an, wodurch ein Verrutschen der Anschlüsse bei der Verwendung von Zwischenringen verhindert wird. Nauticam bietet zusätzlich eine vollständige Palette von Port-Adaptern an, die es bestehenden Gehäuse-Besitzern ermöglichen, ihre aktuellen Ports zu nutzen, was die Kosten für den Wechsel zu einem Nauticam-Gehäuse reduziert. Portadapter sind erhältlich für Aquatica, Ikelite, Inon, Nexus M5 & M6, Sea&Sea NX, Seacam, Subal Version 3 & 4 und Zillion Objektivanschlüsse. Sucher Der standardmäßige optische Glassucher ist sehr gut und reisefreundlich. Aber viele Fotografen bevorzugen die Einfachheit eines vergrößerten Suchers mit einstellbarem Dioptrien. Nauticam produziert einen "geraden" um 180º vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht eine persönliche Anpassung an den scharfen Standard unter Wasser und Sucherwechsel können in weniger als 30 Sekunden ohne Werkzeug durchgeführt werden. Außergewöhnliche Zusammensetzung und Fokusgenauigkeit waren noch nie so zugänglich.

The X-T5, Fujifilm's latest APS-C mirrorless hybrid camera, adds a list of significant upgrades when compared to its predecessors.  Some of the most noticeable improvements are a new 40.2MP sensor with a processor 2x as fast as the X-T4.  As still/video hybrids become more popular, Fuji is offering a high-resolution camera that can record internal 6.2K 10 bit 4:2:2 video or 12 bit ProRes RAW externally over HDMI in addition to shooting an impressive 20fps of continuous stills. FUJIFILM X-T5 Camera The Fujifilm X-T5 features an APS-C CMOS 4 X-Trans 5 HR BSI 40MP Sensor. The X-T5 is powered by a new X Processor 5 which provides extremely fast performance and improved responsiveness. Improved in-body stabilization delivers up to a 7EV benefit which is a significant benefit for video shooters.  The intelligent 425 point hybrid autofocus tracking system is now sensitive down to -7EV allowing it accurately focus in extreme low light conditions.   The X-T5 allows you to record oversampled 6.2K 30p or 4K 30p with a 1.23x crop factor or subsampled 4K 60p with the full width of the sensor.  When combined with the Atomos Ninja V, the X-T5 can output up to 6.2K 12 bit ProRes RAW.  Like the X-T4, the X-T5 also features HLG and F-Log capture to increase dynamic range, protecting highlights and shadows for editing. New to the X-T5 is F-Log2 which provides you with 13+ stops of dynamic range instead of just 12 stops with F-Log.  Key Camera Specifications 40MP APS-C X-Trans CMOS 5 HR BSI sensor In-body image stabilization up to 7 EV benefit 20 fps shooting with AF (15 fps with mechanical shutter) 3.69M-dot OLED electronic viewfinder 4K 60p, 6.2K 30p 4:2:2 10-Bit Videor Internal F-Log and F-Log2 capture Dual UHS-II SD card slots Two-axis tilt rear screen THE NAUTICAM NA-XT5 UNDERWATER HOUSING Nauticam has supported all the previous X-T cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT5 underwater housing.  The NA-XT5 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles. The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot. The NA-XT5 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-ON control. The housing includes two M14 and one M24 bulkhead openings to accommodate a variety of accessories. The NA-XT5 uses the N100 Port System shared with the Fujifilm XH1, XT3 and XT4 system. A selection of port options are available for a variety of lenses. PREMIUM PROFESSIONAL OPTICS Nauticam's wide range of ports and in-house corrective optics are the perfect compliment to the NA-XT5's inherent flexibility. Built around the N100 Port System, the NA-XT5 supports a wide variety of X-mount lenses. In addition, there are several options available to use the groundbreaking WACP-1 and WACP-C wide-angle corrective lenses as well as the more compact and in-water removable WWL-1B and WWL-C. For example, with the Fuji XF 18-55mm f/2.8-4 R LM OIS lens, the WACP-1 brings the original 75º field-of-view to an impressive 130º with sharper corners, an ~0" minimum focus distance and a more natural looking image than would be provided by a standard glass dome port.  For complete water contact lens compatibility, you can view the port chart here.   HDMI 2.0 A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders.  The X-T5 can output up to 6.2K 12 bit ProRes RAW over HDMI 2.0.  See the resources sidebar for additional details and recommended setups. FLASH TRIGGERING Reliable automatic flash exposure is available with the NA-XT5 and a variety of optically fired flashes, precisely reproducing the Fujifilm EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood! The NA-XT5 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (PN 26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain. The NA-XT5 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (PN 26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance. External Battery Pack The NA-XT5 housing supports the use of an USB-C battery pack in order to greatly extend the time between battery swaps, and allowing the housing to remain sealed between dives.  The battery compartment at the bottom of the housing supports batteries up to 150mm(W) x 18mm (H) x 72mm (D).  Here is a known compatible battery with more to come: Anker USB-C Portable Charger 10000mAh with 20W Power Delivery, 523 Power Bank (PowerCore 10K).  (180min of additional run time) 25303 USB-C to USB-C Right Angled Cable (in 0.5m length) is recommended for use with USB-C battery packs.   INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT5 as standard equipment. Combined with an optional M14 Vacuum Valve II (PN 25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing.