Housing o-ring 90134

Das neue Nauticam NA-1DXII-Unterwassergehäuse vereint die Fortschritte der vorhergehenden Nauticam-Gehäuse, zeichnet sich aber durch verbesserte Ergonomie, mehr und besseren Zugang zu den Bedienelementen sowie reduzierte Größe und Gewicht dank modernster Fertigungsprozesse aus. Es gibt eine klare Kontinuität innerhalb der Nauticam DSLR-Produktreihe, und diese Konsistenz im Steuerungslayout ist etwas, das professionelle Fotografen schätzen. Ob Sie nun eine 1DX Mark II, 5DSR oder 7D Mark II verwenden, der Steuerungszugriff ist bemerkenswert ähnlich und sofort vertraut. Auf den ersten Blick scheint es, dass die Ingenieure von Nauticam buchstäblich an alles gedacht haben.  Die Wahrheit ist, sie hören nur zu.  Die Tausende von Nauticam-Benutzern, die ständig im Einsatz sind, haben an alles gedacht.  Das Ingenieurs-Team integriert dieses Benutzerfeedback, und die Produktlinie wird mit jeder neuen Modellversion immer besser. Blitzsteuerung Das NA-1DXII Gehäuse wird standardmäßig mit zwei Nikonos Blitzbuchsen für die elektrische Blitzauslösung geliefert.  Ein optionaler, im Blitzschuh montierter LED-Blitzauslöser ist für die schnelle optische Blitzauslösung (manuelle Stromversorgung) sowie den neuen TTL-Blitzauslöser erhältlich, der eine automatische Blitzauslösung ermöglicht. Die präzise automatische TTL-Blitzbelichtung ist ein beliebtes Merkmal bei Nauticam-Fotografen, die Kameras mit Pop-Up-Blitzen verwenden, und erfreulicher Weise ist diese fortschrittliche Blitzsteuerungsfunktionalität in das NA-1DXII-Gehäuse eingebaut. Der TTL-Trigger wird von einem einzelnen Canon NB-13L-Akku betrieben und bietet etwa 150 Blitz-Auslösungen mit voller Leistung.   Optische TTL-Blitz-Kompatibilität: Inon S-2000, D-2000 und Z-240 Sea&Sea YS-D1, YS-D2 und YS-01 RetraFlash One160x Benutzerfreundlichkeit Kein System ist einfacher zu montieren oder zu zerlegen.  Die Kamera fällt mit einem Schnellverschluss in das Gehäuse.  Es müssen keine Bedienelemente voreingestellt werden, da sich die Gehäusefunktionen für Drehregler und Schalter automatisch ausrichten (ein/aus, AF/M, Standfoto/Video). Die große 120-mm-Portöffnung ermöglicht den Einsatz auch des größten gängigen Canon-Weitwinkelobjektivs (11-24mm, f/4), und die Kamera kann sogar mit diesem großen Objektiv im Gehäuse montiert werden. Sucher Der standardmäßige optische Glassucher ist sehr gut und reisefreundlich, aber viele Fotografen bevorzugen die Erleichterungen eines vergrößerten Suchers mit einstellbaren Dioptrien. Nauticam produziert einen "geraden" 180º vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht eine persönliche, gestochen scharfe Anpassung unter Wasser. Sucherwechsel können in weniger als 30 Sekunden ohne Werkzeug durchgeführt werden. Außergewöhnliche Zusammensetzung und Fokusgenauigkeit waren noch nie so zugänglich. Hochwertige professionelle Optiken Erfahrene Fotografen wissen, dass eine Kamera nur so gut ist wie das Objektiv vor ihr, und das Gleiche gilt für die Wahl der Optik für ein Unterwasserkamerasystem. Vier optisch beschichtete Glaskuppelports (Durchmesser 250 mm, 230 mm, 180 mm und 140 mm) und eine Reihe von Acrylports unterstützen gängige Objektive von Canon, Sigma und Tokina.  Die Anschlusskonfigurationen werden bei Nauticam ausgiebig getestet, um die ideale Verlängerungsringlänge für beste Leistung zu ermitteln. Für Makro- und Supermakroaufnahmen ist der Nauticam Super Macro Converter ein revolutionäres Zubehör. Es handelt sich um ein völlig eigenes Design, das für den Einsatz im Wasser optimiert ist.  Die Wasserkontaktkorrektur bietet die höchste Gesamtschärfe, frei von chromatischen Aberrationen und violetten Rändern, mit Abbildungsraten von mehr als 2:1 bei Verwendung mit einer EF 100mm f/2,8L IS USM Makrolinse. Integriertes Vakuumprüf- und Leckerkennungssystem  Das Nauticam Vakuumprüf- und Leckerkennungssystem ist serienmäßig mit NA-1DXMKII erhältlich. In Kombination mit einem optionalen Vakuumventil liefert dieses Überwachungssystem ständige Updates zum wasserdichten und tauchsicheren Zustand des Gehäuses. Der Bediener kann auf einen Blick den wasserdichten und tauchsicheren Zustand des Gehäuses erkennen. Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, ob das Vakuum stabil ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt. Das Nauticam-System ist temperaturkompensiert und eliminiert Fehlalarme, die durch eine Änderung der Außentemperatur oder durch die Erwärmung einer Kamera bei einem actionreichen Tauchgang verursacht werden.

With the Pocket Cinema Camera 4K, Blackmagic is giving users affordable 4K Raw video. The Blackmagic Pocket Cinema Camera 4K delivers true DCI 4K capture at 60fps recorded in either 12-bit Blackmagic raw format or a variety of 10-bit ProRes flavors. Video can be recorded internally to SD or CFast 2.0 cards or via USB-C to a compact SSD. The MicroFourThirds mount means a large selection of lenses. The Nauticam NA-BMPCCII goes beyond just housing the Pocket Cinema Camera 4K by also supporting additional batteries, a portable SSD and the ability to use external monitors or Recorders. THE BLACKMAGIC POCKET CINEMA CAMERA 4K Blackmagic has built its reputation on defying convention and over-delivering specifications at a reasonable price point. This has perhaps never been truer than with the new Black Magic Pocket Cinema Camera 4K. Sporting a spec sheet that compares to cameras costing thousands of dollars more, the Black Magic Pocket Cinema Camera 4K provides true DCI 4K @ 60fps from its MFT sensor with an impressive 13 stops of dynamic range. 1080 HD can be recorded up to 120fps in windowed format. Particularly impressive; the Blackmagic Pocket Cinema Camera 4K can record this resolution internally to UHSII V90 SD or CFast 2.0 cards in either 10-Bit ProRes or 12-Bit Raw formats. This significant improvement in workflow for professionals and enthusiasts can be taken even further with the world’s first USB-C output to compact SSD recording provided by any manufacturer. Not only does this allow up to 2TB of storage for uninterrupted shooting, it provides immediate access to clips for editing. No additional downloads or transcoding! Underwater shooters will appreciate the new dual native ISO allowing superior lowlight/low noise performance as well the large, bright five inch touchscreen monitor with extensive tools that may eliminate the need for an external monitor in many applications. The Black Magic Pocket Cinema Camera 4K may well prove to be the ultimate run-and-gun camera whether as a primary rig or the “small” B camera that goes where others won’t. Noteworthy Specifications: Full size HDMI with clean 10-Bit Output 3D LUT compatible – whether just for monitoring or baked into the footage as well 4 built in mics and mini-XLR audio input with 48V phantom power Standard Canon LP-E6 Batteries 4th Generation Black Magic Color Science THE NA-BMPCCII UNDERWATER HOUSING The NA-BMPCCII is not just an update of the original NA-BMPCC, it is a ground up redesign for the new Blackmagic Pocket Cinema Camera 4K designed to take full advantage of the great new features of this cinema camera. MISSION CONTROL Nauticam's design philosophy is driven by allowing immediate access to all essential controls within easy reach of the handles, allowing the shooter to make adjustments without having to take their eyes off the screen. Within reach of the right handle are the trigger as well as a control dial for iris, a lever to capture still images as well as a double thumb lever for the white balance and autofocus. A recessed double thumb lever, situated between the trigger and the rear thumb lever accesses the ISO and Shutter Angle (Shutter Speed). Three assignable buttons are atop the housing near the right handle as well as three buttons on the right rear for HFR, Auto-Iris, Zoom and Menu. A thumb lever on the left side activates Review. The NA-BMPCCII features DSLR style ergonomic handles with stainless steel stiffening brackets that are compatible with the optional handle strap (PN 28130). The rear monitor window is compatible with the Monitor Shade for the NA-502 Housing (PN 17916) which attaches via four screws. The underside of the housing has mounting points for use with the Tripod Mounting Ball Set (PN 25218) removing the use for a bulky tripod plate. PREMIUM PROFESSIONAL OPTICS The NA-BMPCCII is built around the N85 Port System which offers a variety of port configurations for a large selection of lenses. The Pocket Cinema Camera 4K features a four thirds lens mount making it compatible with the Olympus M.Zuiko 14-42mm F3.5-5.6 II R lens that when paired with the WWL-1 provides ultra-sharp full-zoom-through wide-angle performance. The WWL-1, when used with the bayonet mount system can be exchanged underwater for the optional CMC-1 or CMC-2 to allow for the capturing of up to 130º wide-angle, macro and super-macro all on the same dive. HDMI 2.0 READY The housing features several bulkheads including the large-bore M28 which supports the use of an HDMI 2.0 recorder such as the Atomos Ninja V through the Nauticam Atomos Ninja V Housing (PN 17922). CUSTOM BATTERY PACK AND SSD SUPPORT To allow for increased run-time, the NA-BMPCCII comes with a custom battery cage that holds 4 x 18650 Lithium Batteries (batteries not included). This battery cage sits securely beneath the camera inside the housing and connects directly to the camera's power supply input. With 4x3400 mAh batteries, the run-time of the system can exceed 3 hours. Atop the camera's position inside the housing is a slot that holds a compact T5 SSD which connects to the camera via USB-C. Run Times Canon LP-E6 internal battery: 40min 4 x 16850 Battery: up to 160min Total Run Time: 3hrs 20min VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-BMPCCII as standard equipment. With the pre-installed vacuum valve, this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Introducing NA-1DXIII The Canon EOS-1D X MARK III Camera  The Canon EOS-1D X Mark III is the brand's flagship DSLR camera is constructed around a redesigned 20.1MP CMOS full-frame sensor.  The new sensor is designed to give the camera both exceptional still and motion picture capabilities that satisfy the professional image and filmmaker's criteria.   Resolution, Speed and Sensitivity The 20.1MP CMOS sensor has the highest ISO range of any Canon EOS camera at 100-102,400 with expandability options for a low of 50 and a high of 819,200 equivalent.  In Live View the Mark III will capture 20fps, even with mechanical shutter and has a continuous burst rate of 1,000 RAW or RAW+JPEG images thanks to the enhanced DIGIC X processor and the use of CFexpress 2.0 recording media. Autofocus Canon's legendary Dual Pixel autofocus is the benchmark for underwater imaging.  With the Mark III, Canon has increased the number of AF zones to 525 and adds Servo AF for moving subjects and claims their Movie Servo AF can now operate down to -6 EV during video recording. Video Recording With 12-bit 5.5K RAW 60p internal recording, the EOS-1D X Mark III has positioned itself to not just maintain but also to grow the already large following it has in the underwater filmmaker community.  While RAW may not be for everyone, the Mark III can also record DCI 4K at 60p from the full sensor width in 10-bit 4:2:2 using the H.265 HEVC codec.  The ability to shoot using the full sensor was not possible with the Mark II and returns the full field-of-view so essential in wide-angle underwater video.  There is still the option to shoot cropped DCI 4K as well (using about 75% of the camera's sensor width) , giving some extra magnification when using macro lenses or even a little more zoom for wide-angle.  Video can be captured with the cinema Canon Log OETF profile.  This profile, developed for the C300 and C500 cinema cameras allows capture of the full 12 T-stop exposure latitude of the new sensor.   Durability and Battery The EOS-1D X Mark III has a 500,000 shutter release rating with reduced black-out and mirror bounce characteristics in addition to extensive weather sealing in keeping with it's position as the flagship DSLR.  For those migrating or adding the Mark III to a workflow containing the Mark II will rejoice in the Mark III's use of the same LP-E19 battery which delivers up to 2 hours of RAW or compressed 4K recording or a CIPA rated 2,850 still images using the viewfinder or 610 shots in Live View.  This is a dramatic increase from the Mark II which was rated at 1,210 and 260 shots respectively.  This long record time gives the Mark III a distinct advantage over mirrorless systems that may record similar quality levels but offer shorter battery life. The Nauticam NA-1DXIII Underwater Housing Nauticam has been providing innovative aluminum housings since the original EOS-1D X with each evolution adapting to the ever changing role this camera plays in underwater image making.  The NA-1DXIII adds a host of video-centric enhancements as well as more refined ergonomics and control access for all shooting situations.   Video Recording While the EOS-1D X Mark III can capture incredible 5.5K 12-bit RAW internally, it can also output uncompressed DCI or UHD 4K video over HDMI at up to 30p.  For those that prefer to use a more edit-friendly codec such as ProRes or DNX, the addition of an external monitor or recorder is an option.  The NA-1DXIII features the large-bore M28 bulkhead that supports Nauticam's HDMI 2.0 cable system and supported monitors/recorders such as the Atomos Ninja V.  The system also supports the HDMI 1.4 standard for use with non-recording monitor solutions such as the SmallHD 502 Bright and comes with an M28 to M16 step-down adapter pre-installed.  See the sidebar for recommended monitor housings and necessary connection accessories. Mission Controll Regardless of where a button or control dial may lie on the camera body, Nauticam engineers obsess over making sure that access to that control on the housing be intuitively placed for ease of use to insure no shot is missed while searching for a button or dial.  The NA-1DXIII features a double-action thumb lever reachable from the right handle that actuates the AF-ON and RECORD buttons on the rear of the camera.  A recessed dual-action lever that rests between the right handle and the housing triggers ISO and the M.Fn controls.  A dual-action thumb lever on the left side is for PLAYBACK/INFO and another dual-action lever on the front left of the housing os for the customizable PV and FN controls.  Large textured control dials on the right side access the main and sub command dials and a large dial on the left side is for controlling lenses equipped with manual focus or manual zoom gears. Flash Triggering The NA-1DXIII supports flash triggering via the built-in fiber-optic bulkheads atop the housing through the use of Nauticam's Manual or TTL flash triggers.  The manual flash trigger provides high speed optical triggering of supported strobes using LEDs powered by an internal user-replaceable battery.  For TTL, the Nauticam Canon TTL Flash Trigger can be used.  The NA-1DXIII also comes with two M14 5-pin Nikonos bulkheads pre-installed along with a Canon to dual Nikonos bulkhead hot-shoe cable for electronic strobe triggering.  The M14 bulkhead is installed along with an M16 to M14 step-down adapter. Integrated Vaccum Check and Leak Detection System The Nauticam vacuum check and leak detection system is shipped with NA-1DXIII as standard equipment. Combined with an accessory vacuum valve (PN 25625 for M16 or 25624 for M14), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. Premium Professional Optics Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater.  The Nauticam NA-1DXIII uses the same N120 Port System as the previous NA-1DXII which makes for a seamless transition for those upgrading to the Mark III.  While this system provides exceptional optical-glass and flat port solutions for a wide variety of EF-mount lenses, the real power of the EOS-1D X Mark III can be realized using Nauticam's Water Contact Optics.  This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations.  The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6.  The SMC-1 and SMC-2 macro wet-optics, when used with the Canon 100mm F2.8 macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 100mm lens itself can achieve in air without a magnifier.

With the ability to accommodate both Panasonic LUMIX S1 and Panasonic S1R cameras, the Nauticam NA-S1R housing offers tremendous versatility to the underwater photographer. Nauticam's drive for innovation and focus on real-world usability is clearly reflected in the NA-S1R's features.   Although the two cameras may have different strengths, the NA-S1R is designed and built to give both video and photography enthusiasts easy access to all the controls and functions, exactly where they need them. Operation Nauticam engineers are obsessed with ease of use, and the Mission Control philosophy means they place essential controls where they are needed, regardless of where they are on the camera body. By placing the controls as close as possible to the handles and within easy and natural reach, users can concentrate on the composition and timing of their shot while adjusting exposure or focus without taking their eye off the viewfinder or screen.   The NA-S1R has a double thumb lever on the left rear of the body that accesses DISP and playback, while a double thumb lever on the left front activates the customisable Fn1 and Fn2 buttons.  A rear thumb lever on the right side is for AF-On and REC.  A lever on the right side of the NA-S1R allows the focus mode to be switched between C/S/MF and a multi-directional pad that provides the ability to navigate through the menu or move the focus point. Sigma EF lens support The MC-21 EF to L adapter from Sigma allows the use of Sigma EF lenses for use with the S1 and S1R cameras. The NA-S1R underwater housing is designed to not only accommodate the adapter, but also to allow the use of the existing focus and zoom wheels for Sigma lenses with Canon mounts, as well as the existing extension ring and port combinations for these lenses.     Flash release Optical flash triggering with automatic exposure (TTL) is supported by the Panasonic DMW-FL70 clip-on flash (sold separately). For quick manual flash triggering, the NA-S1R is compatible with the Nauticam Mini Flash Trigger (NA26309), which uses small LED units to trigger external flashes via Nauticam Universal Fibre Optic (26216).  A TTL flash on/off switch on the top of the housing allows the DMW-FL70 flash unit to be activated or deactivated in water.  HDMI 2.0 output To take full advantage of the S1's video capabilities, the NA-S1R features the large-size M28 connector for HDMI 2.0 connections, such as those used on the Atomos Ninja V in conjunction with the Nauticam Atomos Ninja V housing (HDMI 2.0). Vacuum testing and leak detection system The Nauticam vacuum testing and leak detection system is supplied with NA-S1R as standard. Combined with an additional vacuum valve (NA25625 or NA25624), this monitoring system provides constant information about the watertight and submersible condition of the enclosure. A simple colour-coded LED lighting system indicates to the user that the vacuum is tight or that the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water ingress.  The Nauticam system is temperature compensated and eliminates false alarms caused by a change in outside temperature or a camera heating up during an action-packed dive. Recommended 4K recorder/monitor: NA17922 Nauticam Atomos Ninja V Underwater Housing (HDMI 2.0) for Atomos Ninja V 5 4Kp60 4:4:2 10-bit Recorder/Monitor NA25078 HDMI 2.0 Cable M28A1R225-M28A1R170 for NA17922 Ninja V Enclosure

This housing was designed in collaboration with HydroFlex, the world's leading underwater cinema equipment rental company owned by Pete Romano, ASC. Pete has over 30 years of experience designing underwater housings for film cameras and numerous credentials as an underwater photographer from some of Hollywood's most memorable feature films. Pete's expertise, combined with Nauticam's unmatched design and manufacturing expertise, create the perfect underwater housing system for Alexa Mini - available from HydroFlex Partners worldwide. The Alexa Mini is ideal for use on drones, gimbals and integrates perfectly with the Nauticam Cinema System.  The 4:3 Alexa sensor, complete with anamorphic de-equeeze, ArriRAW and ProRes recording in front of the camera on CFast 2.0 cards in an underwater system, captures footage that intersects seamlessly with other Alexa cameras on set, with the same workflow. Easy camera preparation The Nauticam system is designed for both the owner/operator and rental markets and is very easy to set up. Armed with just a coin and a #3 Allen wrench, the entire support and lens control system is built on the camera base plate outside of the housing. This means that the rig can be set up on a table, in good light, with plenty of working space. Once the camera is mounted on its tray, the entire system slides into the housing and locks securely into place.   Optically coated dome port Our exclusive 250mm optically coated dome port comes with every system and is, in our opinion, the best optic available for cinema lenses. The 250 mm dome port diameter - 10 inches - is key to good wide-angle imaging with many cinema lenses underwater. Smaller domes can work well with close-focusing SLR lenses, but many cinema lenses have a longer minimum focusing distance in the 35-40cm (14-16?) range.  Using the Arri Master Prime T1.4/14mm with its 40cm MFD as an example, the 250mm dome gives much better results with much less corner softness than smaller domes. This is the same dome used in the optical system developed in conjunction with HydroFlex for Alexa65 and used in feature film productions.  The glass dome is robust and extremely scratch resistant.  Broadband anti-reflective coatings eliminate reflections, flare and ghosting from port optics. A rugged machined aluminum screen protects the dome and provides additional impact resistance.  Battery configuration The housing comes with an Anton Bauer "Gold Mount" battery plate and LEMO connector for the Alexa Mini camera. There is ample room for a range of battery pack sizes to be used in the enclosure, resulting in long operating times.  Surface-powered performance is also an option for all-day, networked use. Weight and trim control A sliding weight bracket allows the front and rear fairings to be dynamically adjusted in the water, providing a natural up or down position as needed.  The bracket accepts readily available dive weights that can be easily obtained in the field. Additional trim weights can be attached to the housing slides, or to trim mounting locations strategically placed on the inside of the housing to adjust neutral buoyancy and left-right balance. . Universal lens control Unencumbered control from the surface is a key criterion for many top underwater experts, and these requirements have been incorporated into as many forms as possible throughout the design process.  The basic "diver controlled" system fully meets the needs of a single operator, but our range of accessories aimed at production sets makes the Nauticam housing as much at home on a feature set as it is on an Indo-Pacific coral reef. The housing includes enough space for internal mounting of Arri "cforce mini" motors. These motors control the lens control of the housing, not the lens itself, which means that any lens the housing carries can be set up for surface control of focus, iris and zoom. Alexa Mini has built-in motor control that allows the system to be set up without a motor control unit!  These motors are mounted on specially designed brackets that are attached to the camera bay and do not need to be removed when changing lenses or pulling the camera out of the housing. . The housing also comes with two 3/4" Hydroflex connectors so that the power supply, remote control and remote monitoring umbilical from other Hydroflex rental systems can be used on Alexa Mini. An enormous range of lenses is supported, from very small Zeiss standard speeds to very large cinema-style zooms. Our port system has been tested with Arri UWZ 9.5-18, the most advanced wide-angle lens ever made, with excellent results.

Der NA-1DX stellt die Bedienelemente, die wichtig sind, dorthin, wo sie leicht zu bedienen sind - keine unangenehmen Zugänge sind für alle wichtigen Bedienelemente erforderlich. Das Greifen der bekannten gummierten Griffe ist erst der Anfang der Verbindung, die sich zwischen Fotograf und Gehäuse entwickelt. Ohne den Griff loszulassen, aktiviert der rechte Zeigefinger einfach den patentierten zweistufigen Auslöser von Nauticam. Sowohl die obere als auch die hintere Bedienskala befinden sich einzigartig an der Seite des Gehäuses - leicht zugänglich, ohne die Hand von den Griffen zu nehmen. Der rechte Daumen kann schnell eine neue Doppelpaddelhebelanordnung aktivieren, die die Aufnahmefunktion oben und die AF-ON-Funktion am unteren Hebel aktiviert. Die ISO-Steuerung entlehnt dem brillanten NA-5DMKIII-Gehäuse mit einem Hebel, der mit dem Daumen an der rechten Hand leicht erreichbar ist - wiederum ohne die Hand vom Griff zu nehmen. Diese kritische Entwicklung verbessert die Videofähigkeit erheblich, da die ISO-Variation für die Videobelichtungssteuerung unerlässlich ist. Zweistufiger Auslöser Natürlich sind die wichtigsten Bedienelemente abgedeckt - präzise platzierter zweistufiger Auslöser: prüfen. Befehlswahlschalter direkt auf Knopfdruck: prüfen. AF-ON befindet sich dort, wo es leicht aktiviert werden kann, ohne den Finger vom Verschluss zu nehmen: überprüfen. ISO verfügbar, ohne die Hand zu bewegen: überprüfen. Aber Nauticam hört nicht nur mit den primären Kontrollen auf. Jede Kontrolle wird sorgfältig geprüft. So werden beispielsweise die AF-Punktwahl und die wichtige programmierbare Taste "*" nach oben und rechts verschoben, um sie mit dem rechten Daumen leichter erreichbar zu machen. Mit den Tasten Quick Mode und Set erhalten Sie die legendären Klaviertasten von Nauticam. Das Menü ist mit der linken Hand leicht erreichbar, mit Info und Wiedergabe auf einem Doppelpaddel (ähnlich den Paddles auf der rechten Seite), so dass die Bildbetrachtung, einschließlich Histogramm, verfügbar ist, ohne die linke Hand vom Griff zu nehmen. Die Kamera verfügt über einen Joystick, den einige andere Hersteller ignorieren könnten, da es schwierig ist, eine Steuerung dafür zu entwickeln. Die Designer von Nauticam beherrschten nicht nur diese Steuerung, sondern konnten ihre komplexe Funktionalität sogar näher an die rechte Hand heranführen, um sie für den Unterwasserfotografen nutzbar zu machen. Dieser Joystick wird zum Schwenken während der Wiedergabe benötigt, und die Fünf-Tasten-Lösung des NA-1DX für die Steuerung ermöglicht das Überprüfen von Details mit Schwenken nicht nur, sondern auch ganz einfach. Alle diese ergonomischen Verfeinerungen verfolgen ein Ziel: das ergonomischste Unterwasser-Bildgebungssystem, das möglich ist. Die Nauticam NA-1DX ermöglicht es dem Bediener der Kamera, mit den Händen an den Griffen und dem Blick auf den Sucher oder den externen Videomonitor auf alle wichtigen Kamerasteuerungen zuzugreifen. Nauticam hat auch erhebliche Anstrengungen in Funktionen unternommen, die ein einfacheres Laden der Kamera ermöglichen. Keine Kontrollen erfordern eine Voreinstellung vor dem Einbau einer Kamera in das Gehäuse, wodurch die Möglichkeit von vergeudeten Tauchgängen aufgrund einer falschen Kamerainstallation ausgeschlossen ist. Professionelle Qualität bedeutet, bereit zu sein, wenn Sie es sind. Benutzerfreundlichkeit Kein System ist einfacher zu montieren oder zu zerlegen. Die Kamera hält mit einem Schnellverschluss in das Gehäuse. Es müssen keine Bedienelemente voreingestellt werden, da sich die Gehäusefunktionen für Drehregler und Schalter automatisch ausrichten (ein/aus, AF-M, Standfoto/Video). Die große 120-mm-Gehäuseöffnung ermöglicht den Einsatz auch des größten gängigen Canon-Weitwinkelobjektivs (11-24mm f/4), und die Kamera kann sogar mit diesem großen Objektiv im Gehäuse montiert werden. Sucher Der standardmäßige optische Sucher ist sehr gut und reisefreundlich, aber viele Fotografen bevorzugen die Einfachheit eines vergrößerten Suchers mit einstellbarem Dioptrien. Nauticam produziert einen "geraden" vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht die persönliche Anpassung an ein scharfes Bild.