+49 2501 9292419
shop@panoceanphoto.com
Shop in Münster
Go to homepage
Wishlist
Shopping cart €0.00*

Fujifilm GFX 100S Underwater Housing by Nauticam

Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Photos may show accessories not included in your order. Only the content of the tab "Scope of delivery" is relevant.
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam
Fujifilm GFX 100S Underwater Housing by Nauticam

€8,560.00*

Prices incl. VAT plus shipping costs

Free shipping

We will order this item for you. Delivery time: 12 days **

Product number: NA17158
HAN: NA-GFX100S
With the GFX100S, Fujifilm has transferred the power of the larger medium-format GFX100 into a smaller camera body that is more in line with a standard mirrorless full-frame cameras while also making various performance improvements.  The GFX100S maintains the 102MP BSI CMOS sensor yet features a smaller and lighter in-body image stabilization system, autofocus points that cover virtually 100% of the image frame and is powered by the X-Processor 4 chip.

THE FUJIFILM GFX100S CAMERA

Fujifilm's mirrorless medium-format (44mm x33mm sensor size) GFX100S camera packs the expected large 102MP pixel count into a camera body more in-line with a full-frame mirrorless system.  Even while reducing overall camera size, the GFX100S receives a more capable in-body image stabilization (IBIS) system as well as supercharged autofocus driven by the latest X-Processor 4 chip. 

Key Camera Specs

  • 102MP BSI CMOS Sensor (44mm x 33mm)
  • IBIS rated at 6EV
  • 4K 30p video at up to 400Mbps with full-width readout
  • Uncompressed 10-bit 4:2:2 or 16-but raw video output over HDMI
  • Dual-gain ISO
  • Up to 16-bit uncompressed raw files

The GF-mount lens lineup continues to grow, with more and more lenses meeting the criteria underwater image-makers are after.  Paired with the camera's medium-format 102MP sensor, which is 68% larger than a full-frame sensor, the resulting images have lower noise and greater dynamic range for a given exposure value.  Users can choose to record up to 16-bit uncompressed raw image files, preserving the maximum amount of sensor data for post-processing.

The GFX100S features the latest X-Processor 4 chip which powers the improved autofocus system that covers virtually 100% of the image area.  The camera's large built-in OLED viewfinder has 3.69M-dot resolution at 0.77x magnifications and features variable refresh rates and resolution to enhance battery life.

Video from the GFX100S uses the full sensor width, preserving the original field-of-view of the lens and can be recorded internally as 4K 30p video with a bit-rate of up to 400Mbps.  Over HDMI the GFX100S can output either an uncompressed 16-bit raw or 10-bit 4:2:2 4K video signal, excellent news for those using external monitors/recorders such as the Atomos Ninja V.  

With dedicated settings for both still or video modes, switching between shooting modes is quick and easy via a lever atop the camera.  The camera's "Q" menu can be customized to provide the most valuable information as either an overlay on the live-view representation or as the entire LCD area.  


Example-Setup

The Nauticam NA-GFX100S Underwater Housing 

The NA-GFX100S is built with the singular focus of creating an underwater housing that blends ergonomic design, intuitive control placement and rugged field-tested durability.  The resulting machined aluminum housing can be further refined with the addition of accessories from magnifying viewfinders to external monitors/recorders.  To achieve the full benefit of the stunning 102MP resolution requires the use of underwater optics that are designed with high-resolution lenses in mind to deliver the highest optical quality possible.  

Mission Control Design

The NA-GFX100S is designed with our Mission Control philosophy which dictates placing controls where they are needed most, meaning no more missed shots fumbling for a control or dial.  The majority of exposure and focus controls are within easy reach of the ergonomic handles that feature stainless steel stiffening brackets to reduce any unwanted movement even when using large strobes or video lights.  A multi-direction pad on the upper right of the rear panel gives access to the camera's joystick.  A double lever near the right handle activates the 'AF-ON' and 'Q' controls.  Also on the right side are levers for Focus and View modes.  The left side has a double lever for 'PLAYBACK' and 'DISP' as as levers for turning the EF-X20 TTL flash on or off and one for the cameras 'V-Fn4' control.  On top of the housing is a lever for switching between 'STILL' and 'VIDEO' modes.

Premium Professional Optics

Built around the N120 Port System, the NA-GFX100S supports a variety of GF-mount lenses with a selection of optical-quality glass and acrylic ports as well as access to Nauticam's lineup of premium professional optics.  These optics are designed suing industrial lens design software to provide unparalleled optical quality and impressive fields-of-view.  The Wide-Angle Conversion Port 2 or WACP2, when used with the Laowa 17mm f/4 GFX Zero-D lens can achieve an impressive 140º FOV with an almost 0" minimum focus distance and incredible corner sharpness even at wider-open apertures such as f/5.6.  

Flash Triggering

Flash triggering is via the optional Fujifilm EF-X20 TTL flash and built-in fiber-optic bulkheads.  An option for electronic strobe connection without TTL is also possible using the optional M14 Nikonos bulkhead with universal hot-shoe.  

HDMI Output

The GFX100S can output high-quality uncompressed 4K video over HDMI and the NA-GFX100S is compatible the Nauticam HDMI 2.0 system via the front M24 bulkhead. Even when recording video internally, the use of an external monitor over either HDMI 1.4 or 2.0 is a great tool to help with composition or image review. 

Vacuum Check and Leak Detection System

The NA-GFX100S comes with the Nauticam vacuum check and leak detection system as standard equipment. This monitoring system, working in tandem with the pre-installed vacuum valve, provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

nauticam-GFX100SPre-Launch2

 
Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Fujifilm
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N120
Weiterlesen
Technical data

  • Depth Rating: tba

  • Weight in air: tba

  • Weight in water: tba (includes camera and battery)

  • Dimensions: tba

  • Port Opening: N120

Scope of delivery

  • Fujifilm GFX 100S Underwater Housing by Nauticam 

  • Spare main o-ring, lubricant and removal tool

  • 2x Optical bulkhead caps

  • 2x Handles with mounting balls

  • Set of allen keys

  • CR2032 battery for leak detector

  • Padded housing bag and shoulder strap


Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Spare parts

on stock
M16 plug for housing (with o-ring)
M16 plug for housing (with o-ring)
To cover an M16 socket on an underwater housing from Nauticam.

€23.00*
Housing o-ring 90121
Housing o-ring 90121
Spare O-ring for the following Nauticam housings: NA-5DIII NA-645DF NA-6D NA-70D NA-D300 NA-D300S NA-D700 NA-D800 NA-D81 NA-D600 NA-H4D NA-R6

€25.00*
Housing cap (N120)
Housing cap (N120)
Protect the housing's port sealing surface and prevent dust infiltration into the housing when not in use with this Housing Cap that also has a bayonet ring allowing it to be locked in place as a port would.

€58.00*
Spare O-Rings for 1 inch ballheads
Spare O-Rings for 1 inch ballheads
Spare O-rings for 1-inch ball heads in the popular Nauticam blue.

€16.00*

HDMI 2.0

Atomos Ninja V Underwater housing by Nauticam
Atomos Ninja V Underwater housing by Nauticam
With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS  The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas.   THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.

€2,435.00*
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)

€65.00*
Atomos Ninja V (SDI) Underwater Housing by Nauticam
Atomos Ninja V (SDI) Underwater Housing by Nauticam
This version is suitable to accommodate the Atomos AtomX SDI module. With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS  The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest areas.   THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.

Flash Trigger

N5 bulkhead with universal hotshoe (M14)
N5 bulkhead with universal hotshoe (M14)
This is an M14 mount Nikonos 5-pin bulkhead with universal hotshoe connection (x and ground connection only).

€150.00*
on stock
Adapter for fibre-optic cable to Nauticam
Adapter for fibre-optic cable to Nauticam
Adapter for connecting fibre optic cables with plugs (Sea&Sea standard) to Nauticam underwater housings.

€6.50*
on stock
M16 Vacuum Valve II
M16 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M16 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided.   Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable.   After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
Full Frame Angle Viewinder 40°/ 0.8:1
Full Frame Angle Viewinder 40°/ 0.8:1
The next generation Nauticam Full Frame Angle Viewfinder is the perfect addition to housings for cameras with the latest generation of larger Electronic Viewfinders such as the Sony A1 and A7SII as it provides a bright, clear and undistorted image of the camera’s viewfinder with it's 0.8:1 magnification. This enhanced viewfinder is essential for precise focusing and artistic composition.  This viewfinder is also available in a 1:1 version that can also accommodate viewing of the entire image field on cameras with standard EVFs such as most DSLR and Mirrorless cameras. The Full Frame Angle Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature. The viewfinder can also be rotated when using the camera in a portrait orientation. INTRODUCING NAUTICAM FULL FRAME ANGLE VIEWFINDER 40°/ 0.8:1 For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings. In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Angle Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy. 32º/1:1 VS. 42º/0.8:1 Because different photographers have different needs and priorities, Nauticam offers the Full Frame Angle Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry. For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data. HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder.  as well as the simple installation and removal that takes only seconds. TOOL FREE INSTALLATION The Nauticam Full Frame Angle Viewfinder can be installed in seconds without any tools.  The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings. The viewfinder can also be rotated to allow the camera to be used in portrait orientation. Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at. <iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

€1,590.00*
on stock
Full Frame Angle Viewinder 32°/ 1:1
Full Frame Angle Viewinder 32°/ 1:1
The next generation Nauticam Full Angle Straight Viewfinder is the perfect addition to your housing as it provides a bright, clear and undistorted 1:1 image of the camera’s viewfinder and is essential for precise focusing and artistic composition.  This viewfinder is also available in an 0.8:1 version that can also accommodate viewing of the entire image field on cameras with larger EVFs such as the Sony A1. The Full Frame Angle Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature. The viewfinder can also be rotated when using the camera in a portrait orientation. INTRODUCING NAUTICAM FULL FRAME ANGLE VIEWFINDER 32°/ 1:1 For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings. In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Straight Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy. 32º/1:1 VS. 42º/0.8:1 Because different photographers have different needs and priorities, Nauticam offers the Full Frame Angle Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry. For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data. HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder.  as well as the simple installation and removal that takes only seconds. TOOL FREE INSTALLATION The Nauticam Full Frame Angle Viewfinder can be installed in seconds without any tools.  The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings. The viewfinder can also be rotated when using the camera in a portrait orientation. Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at. <iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>  

€1,590.00*

HDMI 1.4

on stock
Underwater Monitor WED-7 Pro
Underwater Monitor WED-7 Pro
The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*
HDMI (D-D) Cable in 200mm Length
HDMI (D-D) Cable in 200mm Length
This 200mm long HDMi (D-D) cable is designed for the internal connection from the HDMI bulkhead of the housing to the Fujifilm XT2/HX1/A6400 camera HDMI output.

€81.00*
on stock
WED-5 Underwater Monitor
WED-5 Underwater Monitor
5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*

Ball heads

on stock
M5 Strobe Mounting Ball for Housing
M5 Strobe Mounting Ball for Housing
Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€27.00*
Monitor Housing Mounting Adaptor
Monitor Housing Mounting Adaptor
This kit replaces the standard handle top plates to allow the mounting of Nauticam monitor housings to compatible Nauticam underwater housings.

€190.00*

Tripod

Stativplatte für NA-A7S/GH4/A7II/GH5/A9
Stativplatte für NA-A7S/GH4/A7II/GH5/A9
Stativplatte, die an der Unterseite des Gehäuses befestigt wird und drei Standard 1 Zoll Kugelköpfe für Stativbeine oder anderes Zubehör bietet. HINWEIS: Eignet sich nicht für die Cinema-Gehäuse von Nauticam

€580.00*
Universal Quadra-Pod Plate
Universal Quadra-Pod Plate
  A stable filming platform is crucial to capturing many underwater scenes. While larger cinema systems such as the NA-C200, RED Komodo and RED DSMC2 housings feature integrated stabilization options, many Nauticam DSLR and Mirrorless systems now have an option for a similar level of support with the Universal Quadra-Pod Plate. INTRODUCING UNIVERSAL QUADRA-POD PLATE FOR NAUTICAM HOUSINGS   Featuring a flexible housing mounting position, the Quadra-Pod attaches via the integrated threaded mounts on the bottom of supported housings with large knurled thumb screws. The Quadra-Pod can be used in either Quadrapod or Tripod configurations. QUADRAPOD CONFIGURATION TRIPOD CONFIGURATION There are five separate positions with which the Quadra-Pod can be mounted relative to the housing extending either more towards the front or rear of the housing. This flexible positioning allows for the use of various ports and accessories without interference. Four 1" ball mounts can be used to attach a variety of leg options and configurations such as Nauticam double ball arms. The Nauticam Universal Quadra-Pod gives DSLR and Mirrorless users a flexible solution to achieving a more stable filming position underwater while maintaining the low profile that makes these systems appealing.

€375.00*