Carbonarm

Carbonarm ist ein Unternehmen, das eine komplette Serie von Halterungen für Blitzgeräte und Beleuchtungen in höchster Qualität entwickelt und herstellt. Diese Halterungen sind leicht an alle Modelle von Unterwassergehäusen für Kameras und Camcorder anzupassen, von kompakt bis professionell.

Diese Carbonarme stellen eine langlebige Investition dar, da sie mit den neuesten Materialien hergestellt und mit speziellen, für die Meeresumwelt geeigneten Oberflächen behandelt werden. Die Langlebigkeit der Investition wird auch dadurch gewährleistet, dass die Carbonarme, Kugeln, Clips, Stative und verschiedenes Zubehör eine einfache Anpassung an neue Geräte ermöglichen.

Ball head M8 (male)

M8 ball, with M8 thread in the lower part and hexagonal insert in the upper part that allows to tighten it with a simple allen key. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes, lights, and so on. An o-ring at the center of the ball acts like a clutch: the ball tightened by the clamp can be loosened so as to move the arm in the water without having to re-tighten it.

€22.00*

Filter Adapter (M67) for Actioncam housing

Halves the possible minimum distance to the recorded object The magnetic 67mm frame for the T-HOUSING (for Hero 5/6/7 and ACTIONPRO X9) can be attached quickly and safely using the magnets. The scope of delivery includes a 10 diopter macro lens, which can be replaced by other lenses and filters with a 67mm fine thread. Only suitable for the T-HOUSING aluminum deep diving housing for GoPro Hero 5/6/7 black. ATTENTION: If you do not have the magnetic immersion filter set (article 200 256), you also need the magnetic holder (article 200 260) to use this article.

O-Ring_kit for T-Housing GoPro Hero 13/1211/10/9

Spare-O-Ring for the underwater housing for the GoPro Hero 9-13 by Carbonarm

€12.00*

Adapter for INON lenses (GoPro 13/12/11/10/9 T-Housing)

Lens Adapter for Carbonarm underwater housings for GoPRO,

€39.00*

GoPro Hero 13/12/11/10/9 Unterwassergehäuse

Unterwassergehäuse für GoPRO New Hero Black 13, 100% Made in Italy. Garantiert für eine Tiefe von 250 Metern. Großes Frontfenster für den Frontbildschirm, das es Ihnen ermöglicht, das GoPRO während des Tauchgangs zu konfigurieren.> Das Gehäuse besteht aus Aluminium, das mit 50 Mikron eloxiert ist (militärische Behandlung), um eine maximale Haltbarkeit und eine hervorragende Beständigkeit gegen Abnutzung und Meersalz zu gewährleisten. Dieses Gehäuse ist dem GO-PRO New Hero Black 13 (2024) angepasst Alle Bedienelemente sind mit hoher Präzision nach außen gebracht. Das Gehäuse ist aus einem einzigen Aluminiumblock gefertigt, der eine maximale Tauchtiefe von – 250m gewährleistet. Alle Befehle sind über mechanische Tasten zugänglich. Das seitliche Scharnier ermöglicht es, das Gehäuse sehr leicht zu öffnen und zu schließen.> Vorhanden sind eine doppelte O-Ring-Dichtung, eine Zinkabdeckung zum Schutz vor galvanischen Strömen und eine Abdeckkappe für den optionalen externen Akkupack. Im oberen Teil des Gehäuses befindet sich ein M6-Gewinde-Sackloch und ein Loch für einen Sicherungsstift. Sie ermöglichen das Hinzufügen von weiterem Zubehör wie z.B. einer M6-Kugel für zusätzliche Blitzgeräte. Im unteren Teil des Gehäuses befinden sich 4 Gewindelöcher - 2 M6 + n.Kodak metrisches Gewinde. Diese Löcher erlauben es, das Gehäuse einfach auf einem Tablett zu befestigen.

€399.00*

Floating Ring for Moby

This kit consists of 2 floating part with 4 Screws for Moby Support for PDV. Each part is made of closed cell high density polyurethane foam, uncompressible until -150 m and provides a buoyancy of about 80 g (40g each part). This kit is necessary to neutralize the fixed support of the Moby.

€21.50*

Floating Kit for Support Moby

€44.00*

Quick Release Male starting base with screw

Quick Release Male starting base with Kodak and M6 screw for arms and grips and terminals.

€20.00*

on stock

Floating ring (150 g buoyancy)

Floating ring made of closed cell high density polyurethane foam, uncompressible until -100 m and provides a buoyancy of about 150 g . It has a central hole Ø25 suitable for most arms available on the market.

€25.50*

Ball head with 1/4-inch thread (male)

Ball with 2,5 cm diameter with Whitworth thread made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is designed to be mounted on all accessories, both photo and video (for example Go Pro, compact digital cameras, DSLR…) that are arranged with thread Whitworth. This special ball allows to couple the above accessories to all Carbonarm systems such as polecams, arms, clips, etc. .. An o-ring at the center of the ball is acts like a clutch: the ball tightened by the clamp can be loosened so as to move the arm in the water without having to re-tighten it. On the ball a hexagonal hole is provided to tighten it by allen key.

€22.00*

on stock

Open Quadruple Clamp

Quadruple Clamp, open version. The open quadruple clamp allows to use different accessories, such as pilot light, GoPro, strobes, arms etc. The clamp opening allows to direct the arms at different angles.

€50.00*

on stock

Floatarm 320 x 70 mm (745 g buoyancy)

Aluminum Floating arm, complete with 2 terminal balls in anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This arm helps to compensate the negativity of lights, flash and housings underwater.

€129.00*

Float arm 320 x 70mm (+747g) Silver Version

Carbon fiber arm, silver version. Complete with 2 terminal balls in anticorodal aluminum anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This arm helps to compensate the negativity in water of lights, flash and housings. Carbon Fiber Arms 100% Made in Italy, provide an extraordinary resistance to wear and salt, in a very low weight. The quality of out carbon fiber tubes that we choose for our arms, are very high, as can be seen from the beauty of the weave. The balls are made of anticordal aluminum, anodised to 40 microns and have an o-ring to facilitate grip with the clips. The balls are glued to the carbon tube with a special glue, thus ensuring a seal up to 150 meters of Depth.

€199.00*

on stock

Quadruple Clamp

Quadruple Clamp. The quadruple clamp allows to use different accessories, such as pilot light, Go Pro, strobes, arms etc. Blocking clamp. Designed to perfectly tighten balls with 2,5cm diameter (like balls of Carbonarm) made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. The two aluminum parts are assembled through a stainless steel screw. Inside, a stainless steel spring is placed for an easy opening of the clamp when it is necessary to loosen the grip. Outside a washer and a batterfly washer are placed to tighten the system very easily. This system ensure a perfect coupling and tightening of the balls to the arms.

€49.00*

Double Ball Arm Carbon 18 cm (Sliver Version)

Carbon fiber arm, lenght: 18 cm, complete with 2 terminal balls in anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. Carbonarm use only 100% Carbon Fiber made in Italy, guarantee an extraordinary resistance to wear and salt, with very low weight. This is the quality of the carbon fiber tubes we choose for our armss:, are very high, as can be seen from the beauty of the weave. The balls are made of anticordal aluminum, anodised 40 microns and an o-ring to facilitate grip with the clamps. The balls are glued to the carbon tube with a special glue, thus ensuring a seal up to 150 meters of Depth.

€59.00*

on stock

Single ball arm Carbon Fiber (18cm)

18 cm carbon fiber arm, with anodized anticorodal aluminum terminal balls (40 micron military-grade anodization) to ensure maximum durability over time and excellent resistance to wear and salt. Version with ball 25 mm inone side and YS connection in the other side, to be able to directly insert a strobe on the terminal, without the need for a Clamp. Carbonarm uses only 100% Carbon Fiber „Made in Italy“ to guarantee an extraordinary resistance to wear and salt, with very low weight. The quality of the carbon fiber tubes that we choose for our arms, are very high, as can be seen from the beauty of the weave. The balls are made of anticordal aluminum, anodised 40 microns and have an o-ring to facilitate grip with the clamps. The balls are glued to the carbon tube with a special glue, thus ensuring a seal up to 150 meters of Depth.

€59.00*

Carbon float arm 320 x 40 mm (+210g) Silver version

The Silver Arm series is made of carbon fibre combined with aluminium.. Carbonarms carbon fibre lightning arms (100% Made in Italy) offer exceptional resistance to abrasion and salt and a very low weight. The high quality carbon fibre tubes that Carbonarm choose for the arms are very high, as you can see from the precision of the weave. The ball heads are made of anticordal aluminium, anodised to 40 µm and have an O-ring to facilitate the grip with the clamps. The connector balls are glued to the carbon tubing with a special adhesive to ensure a seal up to 150 metres deep.

€137.00*

Double ball arm with Quick Realese and Grip (24cm)

27.5 cm carbon fiber arm with anodized anticorodal aluminum terminal balls. Anodized with 40 micron military treatment to ensure maximum durability over time and excellent resistance to wear and salt. Version with Ball Quick Lift and Grip. It allows you to easily remove the arm from the case to be able to wield the strobe or the lamp. Carbonarm uses only 100% Carbon Fiber „Made in Italy“ to guarantee an extraordinary resistance to wear and salt, with very low weight. The quality of the carbon fiber tubes that we choose for our arms, are very high, as can be seen from the beauty of the weave. The balls are made of anticordal aluminum, anodised 40 microns and have an o-ring to facilitate grip with the clamps. The balls are glued to the carbon tube with a special glue, thus ensuring a seal up to 150 meters of Depth.

€89.00*

on stock

GoPro Tripod Adapter

Go-Pro tripod Adapter. Thanks to the Go-Pro tripod adapter you can fix your GoPro to any tripod with standard thread (1/4 "-20tpi). Made of polycarbonate and stainless steel bolts and threads.

€19.00*

Ball head with stainless steel screw (M6)

M6 ball with a diameter of 2,5 cm, complete with a stainless steel screw. Anticorodal aluminum, anodized with 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes, lights, and so on. An o-ring placed at the center of the ball is acts like a clutch: the ball tightened by the clamp can be loosened so as to move the arm in the water without having to re-tighten it. From anticorodal aluminum to stainless steel screws Carbonarm uses only materials 100% Made in Italy. All parts are designed and produced in Italy, with particular attention to finest details and Quality.

€22.00*

Double ball arm Carbon fiber (24cm)

Carbon fiber arm, size 24 cm, complete with n.2 terminal balls in anticorodal aluminum anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. Carbonarm uses only 100% Carbon Fiber „Made in Italy“ to guarantee an extraordinary resistance to wear and salt, with very low weight. The quality of the carbon fiber tubes that we choose for our arms, are very high, as can be seen from the beauty of the weave. The balls are made of anticordal aluminum, anodised 40 microns and have an o-ring to facilitate grip with the clamps. The balls are glued to the carbon tube with a special glue, thus ensuring a seal up to 150 meters of Depth.

€64.00*

on stock

Double ball arm Carbon fiber (34cm)

34cm carbon fiber arm, complete with 2 terminal balls in anticorodal aluminum anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. Carbonarm uses only 100% Carbon Fiber „Made in Italy“ to guarantee an extraordinary resistance to wear and salt, with very low weight. The quality of the carbon fiber tubes that we choose for our arms, are very high, as can be seen from the beauty of the weave. The balls are made of anticordal aluminum, anodised 40 microns and have an o-ring to facilitate grip with the clamps. The balls are glued to the carbon tube with a special glue, thus ensuring a seal up to 150 meters of Depth.

€79.00*

Double Ball Arm Carbon Fiber (18cm)

€55.00*

Carbon float arm 300 x 40mm (210g buoyancy)

Carbonarm's carbon fibre lightning arms (100% Made in Italy) offer exceptional resistance to abrasion and salt and a very low weight. The high quality carbon fibre tubes that Carbonarm choose for the arms are very high, as you can see from the precision of the weave. The ball heads are made of anticordal aluminium, anodised to 40 µm and have an O-ring to facilitate the grip with the clamps. The connector balls are glued to the carbon tubing with a special adhesive to ensure a seal up to 150 metres deep.

€125.00*