O-Ring-Set for Sony a7II/a7SII/a7RII/a7III/a7RIII

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Open and close with one hand It is very easy to open and close the Sony a7R II, without any effort on the part of the user, the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place. Ports and extension rings A range of ports and extension rings are available in the relevant section. The detachable port mounts to the Sony a7R II body thanks to markers and a 120mm bayonet mount. The interchangeable port housings and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light Two fibre optic ports are located in front of the built-in flash and allow the use of an external flash. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom. Operation Sony a7R II ON/OFF Ergonomic camera focus and shutter release for easy gloved operation Lens release Rear control panel Upper control panel All controls are on the body Special features: Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports; Two M16 ports for installation of accessories, e.g. vacuum valves or monitors;  The rear housing is completely detachable from the front housing; Locking compartment for easy camera insertion; One-hand lock for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back and optical viewfinder; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Removable port - 120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible

The underwater housing for the Sony Alpha 7S II allows you to use the camera to its full potential and capture amazing images underwater. Details of the Isotta underwater housing for Sony Alpha 7S II. Techniques and innovations gained from years of experience have resulted in an easy-to-use, highly professional product. Easy access to all camera buttons/main controls, even when wearing gloves, through clearly labelled, laser-etched buttons with long life.. The back cover has a large viewing window for a good view of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The back cover has a large viewing window for a good view of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The back cover has a large viewing window for a good view of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The housing is very stable due to the robust and wide rubber grippers on the underside. One-handed opening/closing Opening and closing the Sony Alpha 7S II is very easy and effortless thanks to the upper screw bolt and lower centred pins; the camera is simply placed in the case on a sliding tray that holds the camera stably in position. The Sony Alpha 7S II is very easy to open and close thanks to the upper screw bolt and lower centred pins; the camera is simply placed in the case on a sliding tray that holds the camera stably in position.   Ports and extensions A number of ports and extension rings are available in the designated area. The detachable port is attached to the body of the Sony Alpha 7S III thanks to markings and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance.   Light control Two fibre optic ports allow the use of an external strobe via the manual output (optional). The housing has two M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our housings, such as anodised aluminium, which is anti-corodal and thermo-coated, and stainless steel. A durable product that requires easy and simple maintenance by the user. Two high precision and high quality O-ring seals protect and ensure a perfect and secure seal of all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be attached directly to the handles or via an upper M8 threaded hole, via the Isotta top handle or via the M6 threaded holes on the underside. Controls ON/OFF of the Sony Alpha 7S II. Ergonomic camera focus and release buttons for easy operation with gloves. Lens release Rear control panel Upper control panel All controls are available on the handset. The technical specifications Ergonomic side handles, adjustable (via optional accessories) Two fibre optic connectors Two M16 holes and one M24 hole for mounting accessories, e.g. sync cable, vacuum valves, monitors Rear housing completely detachable from the front housing. Shelf with latch for easy camera insertion. One-handed locking button for the back of the case. Aluminium buttons and dials with engraved symbols identical to the camera controls. Large viewfinder glass for panoramic view. Double O-ring seals on all buttons and removable parts. Humidity sensor with LED indicator (replaceable battery) Removable connector -120 mm bayonet Security locking of the ports against accidental &opening. Wide, rubber-coated feet for firm footing on boat or sea floor. M8 hole on the top of the housing for various accessories such as focus lights. Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods. External viewfinders can be mounted, INON X-2 compatible.

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Open and close with one hand It is very easy to open and close the Sony a7 II, without any effort on the part of the user, the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place. Ports and extension rings A range of connectors and extension rings are available in the relevant section. The detachable port mounts to the Sony a7 II body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light Two fibre optic ports are located in front of the built-in flash and allow the use of an external flash. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom. Operation Sony a7II ON/OFF Ergonomic camera focus and shutter release for easy operation with gloves on Lens release Rear control panel Upper control panel  All controls are on the body Special features: Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports; Two M16 ports for installation of accessories, e.g. vacuum valves or monitors;  The rear housing is completely detachable from the front housing; Locking compartment for easy camera insertion; One-hand lock for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back and optical viewfinder; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Open and close with one hand It is very easy to open and close the Sony a7III without any effort by the user thanks to the upper spiral channel and the lower centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place. Ports and extension rings A range of ports and extension rings are available in the relevant section. The detachable port mounts to the Sony a7III body thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light Two fibre optic ports allow the use of external flashes through the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom. Operation Sony a7 III ON/OFF Ergonomic camera focus and shutter release for easy gloved operation Lens release Rear control panel Upper control panel All controls are on the body Special features Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports;  Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;  The rear enclosure is fully detachable from the front enclosure; Locking compartment for easy camera insertion; One-handed locking button for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The rear flap has a large window glass for a fine camera display and optical viewfinder and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Can be opened and closed with one hand It is very easy to open and close the Sony a7R III without the user having to do so using the top spiral and bottom centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera securely in place. Ports and extension ring A range of port and extension rings are available in the relevant section. The detachable port mounts to the Sony a7R III body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light Two fibre optic ports allow the use of an external flash via the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the Bottom. Operation Sony a7R III ON/OFF Ergonomic camera focus and shutter release for easy gloved operation Lens release Rear control panel Upper control Panel All controls are on the body Features: Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports; Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;  The rear enclosure is fully detachable from the front enclosure; Locking compartment for easy camera insertion; One-handed locking button for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;