Z Adapter MV

The INON Z-330 provides powerful Guide Number 33, high performance and multifunction in its compact body. Its built-in optically designed dome lens offering both high power and wide 110 degree coverage underwater without any diffuser which can sacrifice power. For digital cameras, film cameras, optical connection and sync cable connection, the Z-330 strobe supports every camera system with unparalleled features. Dome Lens Provides Both Powerful Light and Underwater 110 degree Coverage Yet lightweight and compact body, the Z-330 is designed to produce powerful G.N. 33 (*1). Precisely designed front dome lens (*2) together with INON's unique patented "T-shape Twin Flash" successfully manages both powerful strobe light without sacrifice any power and circular 110 degree coverage UNDERWATER. Not as like a conventional translucent diffuser which can widen coverage while it has to sacrifice power and store heat inside, this specially designed dome lens diffuses light thanks to reflection ratio of air, acrylic and water to attain UNDERWATER coverage 110 degree with almost all powerful output coming through. Furthermore, the Z-330 has overcame drawback of high-power strobe which has long flash duration and reaches to FULL power after start flashing in significantly short period of time. Together with flashing system in sync with pre-flash and main flash of camera’s built-in flash, the Z-330 can deliver full dump even at 1/1000 high shutter speed setting without cutting power (*1) Measurement in air/ ISO100·m, Nominal value (*2) PAT. P on the dome lens system to widen underwater coverage. (*1) Messung in Luft / ISO100?m, Nennwert (*2) PAT. P auf dem Kuppellinsensystem zur Erweiterung der Unterwasserabdeckung. S-TTL Auto /13 Steps Manual Flash Mode Proven and reliable INON's unique super accurate auto exposure system "S-TTL" Auto mode (patented) is onboard to support easy and solid underwater shooting with appropriate exposure. In addition, optimized high performance slave sensor never miss camera's trigger signal even with faint signal or partially damaged fiber optics cable can still trigger the strobe not to bother you with unstable flashing. Precise 1/2EV. increment 13 steps Manual flash control is onboard as well to support professional use where fine power adjustment is required to provide highly accurate lighting. EV. Controller to Adjust Exposure of S-TTL Auto It is simple to fine-tune flash power in S-TTL Auto by dialing the EV. Control Switch on the back control panel. Adjustable range is 3 steps to increase and 6 steps to decrease. It is easy and simple to suit to your intended exposure or different exposure control characteristics among camera models. Bundled "Strobe Light Shade" to Prevent Shining Camera Lens The "Strobe Light Shade" is bundled as standard accessory to cut a part of strobe light to benefit to dramatically suppress flare or ghost by not shining camera lens directly and backscatter when a strobe is positioned to vicinity or ahead of lens port by blocking light between lens port and subject not to shine suspended particles. The flange part rotates 360 degree. Intuitive operation and comfortable adjustment is supported with light clicks even underwater while you shoot.   220 lumen, Shutter Linked Auto OFF Focus Light The built-in "Shutter-linked Auto-Off Focus Light" delivers 220lm brightness to support when focusing a subject and cease in synch with the shutter release then automatically turns ON again. To aim optical axis of the Focus Light in line with strobe light’s optical axis, the Focus Light has a fresnel lens in front supporting more accurate strobe aiming and improved usability as an aiming light. Conspicuous Phosphorescence Back Panel - Improved Intuitive Control Dials Using white base high-intensity phosphorescence material for the back panel to improve visibility both during day and night dive. Also control dials are enlarged for user-friendly controllability even through thick gloves during cold water diving. The "EV. Control Switch" stops at minimum and maximum power setting telling you current switch position without seeing the switch itself.   Radiation System to Release Generated Heat Inside The Z-330 strobe is equipped with circular metal heatsink carrying high thermal conductivity around light emitting area. The heatsink is directly connected to inner circuit component to release generated heat from strobe usage effectively. Improved heat tolerance has resolved heat problem typically accompanied with powerful strobe. No stress with sudden stop of flashing to cool down. Minimum Recycle Time "approx. 1.6 sec." at Full Flash Minimum recycle time at full flash (how fast the strobe ready lamp shines and the strobe is ready after making full flash) is approx. 1.6 sec.(*3) achieving fast recycle time even delivers powerful light. (*3) With recommended Panasonic "eneloop pro", BK-HCD, 1.2V, Min.2,500mAh. Recycle time based on INON test data. Wide Variety of Dome Filters The Z-330 strobe has a bayonet system to hold a strobe dome filter to attach/remove easily. Besides bundled "Strobe Dome Filter SOFT" to protect dome lens surface and soften strobe light, optional "Strobe Dome Filter ND" which steps down at -4EV, "Strobe Dome Filter [4600K]" which changes native color temperature to 4600K and "Strobe Dome Filter [4900K]" which changes to 4900K will be available in 2018. Both Optical/Electrical Trigger Supported Optical connection system widely supports from underwater housings for compact digital cameras to a digital SLR housings with built-in flash or SLRs housing with built-in LED trigger circuitry regardless of make or model. The strobe is equipped with Nikonos 5 pin type cable compatible sync connector to shoot in TTL Auto mode with a film camera or in Manual mode for a digital SLR housing with a bulk head (*4). (*4) Usable function may vary depending on camera system and connection method On-board Wireless TTL The high sensitive slave sensor enables wireless S-TTL Auto mode using a mirror instead of an optical cable. Attaching optional Wireless Connection Kit on the Z-330 and combined with an underwater housing via Shoe Base Set or Grip Base D4 Set creates a handy S-TTL Auto shooting set. * Not compatible with camera's on-board wireless system such as Olympus wireless RC flash system or Nikon creative lighting system as wireless flash system differs. Integral Pre-flash Mode Detecting Function Fully compatible with a camera which alters number of pre-flash between once or twice making total flashes twice or three times depending on shooting condition. The Z-330 automatically detects number of pre-flash to activate adequate program to support proper functioning of Manual as well as highly accurate S-TTL Auto mode. INON unique Advanced Cancel Circuit benefits you with faster recycle time and more images per battery set to eliminate drawbacks when using Manual Flash mode with a pre-flash type digital camera where the built-in flash always burst full dump.  

Lightweight Reinforced Plastic Body Made of reinforced plastic (FRP) for durability and not to compromise benefit of lightweight GoPro® camera. Easy to install to snap on the front of a housing and fix with a thumbscrew. Optional Accessories for Selfie, Follow Camera Using an optional “Ball Adapter for GoPro” attached on the “Carbon Telescopic Arm” to combine with your GoPro camera, is an ideal selfie system to record while swimming around. INON's original fixing screw can securely hold the camera in place, enabling stable video recording underwater without worrying about unexpected camera displacement due to current. All components are designed for underwater use offering superior durability and corrosion resistant characteristic. Attaching a conversion lens on an action camera gets heavy especially when using a “Carbon Telescopic Arm”. Optional“Mega Float Tube” attached on top end of the arm supports comfortable handing underwater without having heavy load on hand grip. Versatility The bottom of the M67 Front Mask for HERO9 has a screw hole to attach joint adapters including "Direct Base III", "Z Joint", "Z Adapter MV" and "Shoe Base M6" to use GoPro® cameras for various applications. The M67 Front Mask for HERO9 comes with "Male Adapter (GoPro)" which is attached on the bottom of the M67 Front Mask for HERO9 to 13 to use GoPro® compatible accessories. Stability Supplied Mount Adapter enables to install one "D5 Holder" on the left hand side supporting stable shooting underwater. Combining with the “Grip Base D5”* and “D5 Holder” allows you to hold the camera steadily with both hands for stable shooting underwater with less camera shake and you can enjoy a full-scale underwater video system with dual lighting. * Optional “Direct Base YS RT”and ”Z Joint”are required to attach “Grip Base D5”. Tripod, Monopod The Mount Adapter is equipped with the tripod screw (1/4”) to link to a tripod or monopod for shooting no camera shake footage, time-lapse, fixed-point observation etc. 

Following the latest features of the Z-330 flash, the D-200 underwater flash is designed for a maximum guide number of 20 and an optical trigger system. The built-in dome lens is optically designed to provide wide 110-degree underwater coverage without a diffuser that can affect performance. High performance, multi-functionality and user-friendly handling with the lightest underwater weight support your underwater photography with superior Performance. Extended underwater coverage 110 degrees through dome lens The precisely designed front dome (*1) together with INON's unique patented "T-Shape Twin Flash" successfully creates both a strong guide number of 20 (*2) and circular 110 degree coverage underwater without sacrificing power. Without the use of a diffuser, the D-200 flash is well designed to deliver high power and wide coverage. Unlike a conventional translucent diffuser that can widen coverage while blocking some of the power and trapping heat inside, this specially designed dome lens diffuses light thanks to the reflective ratio of air, acrylic and water to achieve 110 degrees of UNDERWATER coverage with almost all of the powerful output passing through it. In addition, the D-200 has overcome the disadvantage of the high-power flash, which has a long flash duration and reaches full power in a significantly short time after starting the flash. Together with the flash system synchronised with the pre-flash and main flash of the camera's built-in flash, the D-200 can deliver full power even at a high shutter speed of 1/1000 without reducing output. (*1) PAT. P on the dome lens system to extend underwater coverage. (*2) Measurement in air / ISO100?m, nominal value.   Easy to handle under water, buoyancy only 4 grams The D-200 strobe light provides buoyancy at 4 g (*3) underwater, including 4 x AA eneloop batteries and Strobe Light Shade, making the strobe light easily buoyant underwater. By attaching an adapter such as "Z Adapter MV" or "Z Joint", the buoyancy can be almost neutral in salt water. (*3) The buoyancy measured in fresh water is about 4g. The calculated buoyancy in seawater is about 23g. Includes 4 x "eneloop" batteries and Strobe Light Shade. S-TTL automatic /13 power levels in manual flash mode Proven and reliable INON's unique, super-accurate automatic exposure system "S-TTL" Auto mode (patented) is on board to support simple and solid underwater photography with balanced exposure. What's more, even if the signal is weak or the fibre optic cable is partially damaged, the optimised, high-performance slave sensor never misses the camera's trigger signal so as not to hinder you with fickle flashes. Manual flash control with precise 1/2 f-stops is also built in to support professional use when fine-tuning of power is required for high-precision lighting. Power controller for setting the exposure of the S-TTL automatic system Fine-tuning the flash output in S-TTL auto mode is easy by selecting EV. control switch on the back of the control panel. The setting range can be increased in 3 steps and decreased in 6 steps. It is simple and straightforward to adjust to the intended exposure or the different exposure control characteristics of different camera models. Bundled "flash baffle" to prevent illuminated camera lens The "flash hood" (included) "cuts off" a portion of the flash light to dramatically reduce flash or ghosting by not directly illuminating the camera lens. It also prevents floating particles when a flash is positioned near or in front of the lens port, as the water between the port and the subject is less illuminated. The flange part can be rotated 360 degrees. Intuitive operation and comfortable adjustment is supported by easy clicks even under water during shooting.   Trigger-coupled auto OFF focus light with 220 lumens The built-in "Shutter-linked Auto-Off Focus Light" provides 220 lumens of brightness that assists the camera in focusing on a subject and stops in sync with the shutter release, then automatically turns back on. To align the optical axis of the focusing light with the optical axis of the flash, the focusing light has a Fresnel lens in front of it, which supports more accurate aiming of the flash and better usability as an aiming light. Eye-catching fluorescent back panel - Improved intuitive controls Use of high-intensity white-based phosphorescent material for the back panel to improve visibility during both day and night dives. The control buttons are also enlarged to allow user-friendly control even through thick gloves when cold-water diving. The "EV. Control Switch" stops at the minimum and maximum power setting and shows you the current switch position without seeing the switch itself. Radiation System for releasing the generated heat inside The D-200 underwater flash is equipped with a circular metal heat sink that has high thermal conductivity around the light-emitting surface. The heat sink is directly connected to the inner circuit component to effectively dissipate the heat generated when using the underwater flash. Improved heat tolerance has solved the heat problem normally associated with a powerful underwater flash. No stress with sudden stop of the flash to cool down. Minimum recycling time "approx. 1.6 sec." at full flash output The minimum repetition time at full flash (how quickly the flash-ready lamp lights up and the flash is ready after full flash) is approx. 1.6 sec(*3), giving a fast repetition time that even provides strong light. (*3) With recommended Panasonic "Eneloop Pro", BK-HCD, 1.2V, Min.2.500mAh. Recycling time based on INON test data. Large selection of dome filters The Z-330 underwater flash has a bayonet system to accept a dome flash filter, which is easy to attach/remove. In addition to the bundled "Strobe Dome Filter SOFT" for protecting the dome lens surface and softening the flash, the "Strobe Dome Filter ND", which drops at -4EV, the "Strobe Dome Filter [4600K]", which changes the native colour temperature to 4600K, and the "Strobe Dome Filter [4900K]", which changes to 4900K, are optionally available. Simple yet secure optical cable connection The INON optical connection system is flood-free and provides a simple but reliable connection between flash unit and camera system, including compact digital camera housings, housings for digital SLR cameras with built-in flash or SLR housings with built-in LED trigger circuit, regardless of brand or model. Integrated wireless TTL The high-sensitivity slave sensor enables wireless S-TTL auto mode using a mirror instead of an optical cable. Attaching the optional wireless connection kit to the D-200 and combining it with an underwater housing via the Shoe Base or Grip Base Set D4 creates a practical S-TTL auto shooting kit. * Not compatible with the camera's wireless on-board system such as Olympus' wireless RC flash system or Nikon's creative lighting system as the wireless flash system is different. Integrated pre-flash mode detection function Fully compatible with a camera that changes the number of pre-flashes between once and twice, and flashes two or three times in total depending on the shooting condition. The D-200 automatically detects the number of pre-flashes to activate a suitable programme that supports both manual and high-precision S-TTL auto modes. The unique INON Advanced Cancel Circuit benefits you with faster recycle time and more images per set of batteries to eliminate disadvantages when using manual flash mode with a digital camera with pre-flash, where the built-in flash always fires at full.

A guide number of 20, beam angle 105º ×95º without diffuser, circular 110º light distribution with a diffuser, digital camera compatible high-precision S-TTL Auto and 12-step Manual modes, rich and basic performance is housed in an ultra-compact body to ensure excellent portability. Marginal downsized with high performance 6 4mm x 83.1mm x 106.5 mm (W x H x D). Successfully designed the world's smallest body size as a 4AA-powered underwater flash (*1) with optimised internal component layout and reduction of unnecessary space. Best suited with a compact digital camera with its portability, incredibly compact size even as a dual flash and high performance to support a digital SLR camera. The S-2000 underwater flash completely changes lighting concepts.  (*1) As of March 2009 among 4AA-powered underwater TTL flash units (data from INON INC.). Not only compact The Inon S-2000 underwater flash is powered by 4x AA batteries to ensure the basic functions of the flash, although operation with 4x AA batteries is opposed to downsizing. The same level of basic performance including Guide No. 20 (*2), minimum recycling time 1.5 sec. (*3) and durability as the upper model are operated with its compact housing. In addition to the reliable and super-accurate S-TTL auto mode, the 12-step manual mode is equipped to support professional use. Other features include the EV. Controller for fine-tuning when shooting in S-TTL auto mode and the automatic switching function to adapt to different pre-flash modes (single or double pre-flash) of the digital camera are also integrated. (*2) Measurement in air /ISO100?m, nominal value (*3) When using "eneloop" or other compatible NiMH batteries.   Integrated wireless TTL capability The S-2000 underwater flash has a high-sensitivity slave sensor that is 100 times more sensitive than the slave sensor of the D-2000 Type 3 flash and successfully enables support for S-TTL wireless auto flash without the use of a D optical cable. The sensitivity of the slave sensor also dramatically extends the sync range of manual flash operation. The package includes a Wireless Connection Kit that optimises the built-in flash light reception on the slave sensor. Wireless S-TTL auto flash is easy to use by simply attaching the flash to a compatible underwater housing via the INON connection kit or the D4 handle base. You can photograph a vivid underwater world with a powerful external flash holding a rig with one hand. Using the D-cable optical connector ensures more reliable flash sync in challenging conditions with bright ambient light such as just below the surface.   Unlimited expandability with optical cable system The S-2000 underwater flash from Inon is equipped with a plug holder on the front to receive the flash's TTL signal. An S-2000 flash unit can be connected to a maximum of two flash units via optical cables and operate them in [S-TTL Auto mode]. This optical cable system offers the advantage that you can easily supplement the [S-TTL Auto] flash mode by connecting an optical cable to receive the S-TTL control signal from your camera system. This expansion option makes an underwater studio with perfect lighting feasible.   Natural colour even with a diffuser The beam angle without diffuser is 105º x95º, which increases to a circular 110º with the supplied -0.5 white diffuser for S-2000. The diffuser is made of specially manufactured material so as not to change the colour of the flash light, where the colour temperature of the flash light only drops by 100K (Kelvin). You can have the same colour tone between macro shots without the diffuser and wide angle shots with the diffuser to widen the flash beam angle.  

Ultra Wide, High Power, Compact Underwater Strobe Achieved an increades GN22 with the same compact size as the previous model (INON S-2000). A high-perfomance fly-eye dome to dramatically increase beam angle underwater. Large wheel dial for operability, easy to see phosphorescent panel. Double O-Rings greatly reduce the risk of flooding. Compact body yet delivers GN22 Equipped with a fly-eye dome lens enabling super wide underwater beam angle of horizontal 140°×vertical 100° Reliable and proven "S-TTL Auto" and 12-step "Manual Flash Large wheel dial for dramatically improved operability. A phosphorescent panel for easy readability Double O-rings greatly reduce the risk of flooding Front positioned base contributes more flexible lighting Operates on four AA batteries, readily available and reasonably priced Compatible with various strobe dome filters Supports "Quick Holder" for easy one-touch attachment/detachment Compact yet Powerful GN22 Despite of compact body, the S-220 spreads high-power GN22. The full-scale performance coupled with a wide underwater beam angle provides unparalleled performance as a main strobe in all areas, regardless of whether for wide-angle or macro photography or compact digital camera or SLR camera. Super Wide Beam of 140° Horizontal x 100° Vertical Underwater Created by Fly-eye Dome Lens A precisely calculated and uniquely designed fly-eye dome lens for the light-emitting part attains extraordinary underwater beam angles of 140° horizontally × 100° vertically with minimal light distribution Variation. This wide beam angle perfectly fills the "UWL-95S XD" + "Dome Lens Unit III" underwater coverage of horizontal 140° x vertical 100° (at 4:3 aspect ratio), enabling a single S-220 strobe to illuminate the entire image. Reliable "S-TTL Auto" and 12-step "Manual Flash" Equipped with reliable and proven INON original high-precision automatic "S-TTL Auto" flash control system and 12 step "Manual Flash" function with -0.5EV. increment. The S-TTL Auto system can be used not only with camera's built-in flash but also with INON original TTL converter equipped with INON housings, "X-2 R6 Mark II","X-2 R6" and "X-2 R5" for even more precise TTL system. You will never miss a shutter chance. Large Wheel Dial for Greatly Improved Controllability and Phosphorescent Control Panel Improves Readability Redesigned large control wheel and switches significantly improve operability. In addition, the rear control panel is white-based highly illuminant phosphorescent material, ensuring easy-to-read usability both during day and night diving. Double O-rings Significantly Reduce Flooding Risk Ball adapters such as the "Z Adapter MV" and "Direct Base Ⅲ" is located forward close to the light-emitting surface, instead of rearward in the previous models not let an optical cable to interfere lighting flexibility. Operates on 4 Readily Avaiable, Inexpensive AA Batteries Various Dome Filters The S-220 strobe is equipped with a bayonet mount to use various dome filters.Packaged dome filters are "Strobe Dome Filter S [SOFT]" which increases strobe beam angle to horizontal 150° x vertical 110° while reducing light intensity by -0.5EV. and "Strobe Dome Filter [ND]" which reduces light intensity by -4EV. specifically for macro imaging.In addition, two optional strobe color filters are available: Strobe Dome Filter S [4900K] and Strobe Dome Filter S [4600K], which warms native strobe color temperature 5500K to either 4900K or 4600K.

The INON Z-330 provides powerful Guide Number 33, high performance and multifunction in its compact body. Its built-in optically designed dome lens offering both high power and wide 110 degree coverage underwater without any diffuser which can sacrifice power. For digital cameras, film cameras, optical connection and sync cable connection, the Z-330 strobe supports every camera system with unparalleled features. Dome Lens Provides Both Powerful Light and Underwater 110 degree Coverage Yet lightweight and compact body, the Z-330 is designed to produce powerful G.N. 33 (*1). Precisely designed front dome lens (*2) together with INON's unique patented "T-shape Twin Flash" successfully manages both powerful strobe light without sacrifice any power and circular 110 degree coverage UNDERWATER. Not as like a conventional translucent diffuser which can widen coverage while it has to sacrifice power and store heat inside, this specially designed dome lens diffuses light thanks to reflection ratio of air, acrylic and water to attain UNDERWATER coverage 110 degree with almost all powerful output coming through. Furthermore, the Z-330 has overcame drawback of high-power strobe which has long flash duration and reaches to FULL power after start flashing in significantly short period of time. Together with flashing system in sync with pre-flash and main flash of camera’s built-in flash, the Z-330 can deliver full dump even at 1/1000 high shutter speed setting without cutting power (*1) Measurement in air/ ISO100·m, Nominal value (*2) PAT. P on the dome lens system to widen underwater coverage. (*1) Messung in Luft / ISO100?m, Nennwert(*2) PAT. P auf dem Kuppellinsensystem zur Erweiterung der Unterwasserabdeckung. S-TTL Auto /13 Steps Manual Flash Mode Proven and reliable INON's unique super accurate auto exposure system "S-TTL" Auto mode (patented) is onboard to support easy and solid underwater shooting with appropriate exposure. In addition, optimized high performance slave sensor never miss camera's trigger signal even with faint signal or partially damaged fiber optics cable can still trigger the strobe not to bother you with unstable flashing. Precise 1/2EV. increment 13 steps Manual flash control is onboard as well to support professional use where fine power adjustment is required to provide highly accurate lighting. EV. Controller to Adjust Exposure of S-TTL Auto It is simple to fine-tune flash power in S-TTL Auto by dialing the EV. Control Switch on the back control panel. Adjustable range is 3 steps to increase and 6 steps to decrease. It is easy and simple to suit to your intended exposure or different exposure control characteristics among camera models. Bundled "Strobe Light Shade" to Prevent Shining Camera Lens The "Strobe Light Shade" is bundled as standard accessory to cut a part of strobe light to benefit to dramatically suppress flare or ghost by not shining camera lens directly and backscatter when a strobe is positioned to vicinity or ahead of lens port by blocking light between lens port and subject not to shine suspended particles. The flange part rotates 360 degree. Intuitive operation and comfortable adjustment is supported with light clicks even underwater while you shoot. 220 lumen, Shutter Linked Auto OFF Focus Light The built-in "Shutter-linked Auto-Off Focus Light" delivers 220lm brightness to support when focusing a subject and cease in synch with the shutter release then automatically turns ON again. To aim optical axis of the Focus Light in line with strobe light’s optical axis, the Focus Light has a fresnel lens in front supporting more accurate strobe aiming and improved usability as an aiming light. Conspicuous Phosphorescence Back Panel - Improved Intuitive Control Dials Using white base high-intensity phosphorescence material for the back panel to improve visibility both during day and night dive. Also control dials are enlarged for user-friendly controllability even through thick gloves during cold water diving. The "EV. Control Switch" stops at minimum and maximum power setting telling you current switch position without seeing the switch itself. Radiation System to Release Generated Heat Inside The Z-330 strobe is equipped with circular metal heatsink carrying high thermal conductivity around light emitting area. The heatsink is directly connected to inner circuit component to release generated heat from strobe usage effectively. Improved heat tolerance has resolved heat problem typically accompanied with powerful strobe. No stress with sudden stop of flashing to cool down. Minimum Recycle Time "approx. 1.6 sec." at Full Flash Minimum recycle time at full flash (how fast the strobe ready lamp shines and the strobe is ready after making full flash) is approx. 1.6 sec.(*3) achieving fast recycle time even delivers powerful light. (*3) With recommended Panasonic "eneloop pro", BK-HCD, 1.2V, Min.2,500mAh. Recycle time based on INON test data. Wide Variety of Dome Filters The Z-330 strobe has a bayonet system to hold a strobe dome filter to attach/remove easily. Besides bundled "Strobe Dome Filter SOFT" to protect dome lens surface and soften strobe light, optional "Strobe Dome Filter ND" which steps down at -4EV, "Strobe Dome Filter [4600K]" which changes native color temperature to 4600K and "Strobe Dome Filter [4900K]" which changes to 4900K will be available in 2018. Both Optical/Electrical Trigger Supported Optical connection system widely supports from underwater housings for compact digital cameras to a digital SLR housings with built-in flash or SLRs housing with built-in LED trigger circuitry regardless of make or model. The strobe is equipped with Nikonos 5 pin type cable compatible sync connector to shoot in TTL Auto mode with a film camera or in Manual mode for a digital SLR housing with a bulk head (*4). (*4) Usable function may vary depending on camera system and connection method On-board Wireless TTL The high sensitive slave sensor enables wireless S-TTL Auto mode using a mirror instead of an optical cable. Attaching optional Wireless Connection Kit on the Z-330 and combined with an underwater housing via Shoe Base Set or Grip Base D4 Set creates a handy S-TTL Auto shooting set. * Not compatible with camera's on-board wireless system such as Olympus wireless RC flash system or Nikon creative lighting system as wireless flash system differs. Integral Pre-flash Mode Detecting Function Fully compatible with a camera which alters number of pre-flash between once or twice making total flashes twice or three times depending on shooting condition. The Z-330 automatically detects number of pre-flash to activate adequate program to support proper functioning of Manual as well as highly accurate S-TTL Auto mode. INON unique Advanced Cancel Circuit benefits you with faster recycle time and more images per battery set to eliminate drawbacks when using Manual Flash mode with a pre-flash type digital camera where the built-in flash always burst full dump.