This tray applied on top of the housing and fixed to the handles, allows the use of optional accessories with the Isotta's DSLR and Mirrorless housings.
The Isotta underwater housing for Nikon D850 allows to capitalize on the camera full potential and to capture amazing pictures underwater.
Product details Isotta underwater housing for Nikon D850
An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Nikon D850 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible.
ONE HAND OPEN/CLOSE
The housing for Nikon D850 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing.
PORTS AND EXTENSION RING
A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon D850. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.
TTL CONVERTER FLASH (optional)
The housing for Nikon D850 features TTL Converter Electronics for Automatic flash control. It also offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 hole positioned on the upper side of the housing and double threaded M6 holes located on housing bottom side.
Highlights
Ergonomic side handles, adjustable (via optional accessory)
TTL converter electronics for automatic flash control not included
Two fiber optic connectors (included)
Two electrical sync cord bulkheads Nikonos N5 or S6 not included
Back housing completely detachable from the front housing
Tray with lock for an easy fitting of the camera
Single-hand closing knob for back housing
One M16 hole for installation of accessories, e.g. vacuum valves or monitors
Aluminum buttons and dials with engraved symbols identical to camera controls
All camera controls are external
Wide back display viewfinder glass
Optical viewfinder
Double O-Ring seals on all buttons and removable parts
Moisture alarm with LED and an acoustic warning signal (replaceable battery)
Removable port - 120mm bayonet
Ports security latch to prevent accidental opening
Wide, rubber covered feet for solid footing
M8 hole located on upper side of the housing for various accessories such as focus lights
Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods
External viewfinders can be mounted, INON X-2 compatible
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Canon EOS 5D Mark III body is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all key camera controls with clearly labelled, laser engraved, durable buttons, even when wearing gloves and dry diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible.
Open and close with one hand
The Canon EOS 5D Mark III housing is locked with Isotta's one-handed, single-turn knob. It is the only single locking mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the underside of the housing.
Ports and extensions
A range of ports and extension rings are available in a dedicated section. The detachable port mounts to the Canon EOS 5D Mark III thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance.
Light
The housing of the Canon EOS 5D Mark III offers the possibility to use external flashes via two standard light connectors as well as two Nikonos sync cable sockets. This allows for easy mounting of all flash and lighting equipment.
Construction and safety
Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing.
Special features:
Ergonomic side handles, adjustable (via optional accessories);
Two fibre optic connectors (optional);
Two standard sync cable sockets;
Rear housing is fully detachable from the front housing;
Locking compartment for easy camera mounting;
One-hand lock for rear housing;
One M16 connector for installation of accessories, e.g. vacuum valves or monitors;
Aluminium buttons and dials with engraved symbols identical to the camera controls;
all camera controls are external;
Viewfinder glass with wide back;
Optical viewfinder;
double O-ring seals on all buttons and removable parts;
Humidity sensor with LED and audible indicator (replaceable battery);
Removable port - 120mm bayonet;
Safety lock on ports to prevent accidental opening;
Wide, rubberised feet for firm footing;
M8 hole on top of housing for various accessories such as focus lamps;
Two M6 holes on the bottom of the housing for various accessories such as mounts for flash units or tripods;
External viewfinders can be mounted, INON X-2 compatible;
The housing for Canon EOS 5D Mark IV allows to capitalize on the camera full potential and to capture amazing pictures underwater.
Product details
An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Canon EOS 5D Mark IV housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible.
ONE HAND OPEN/CLOSE
The housing for Canon EOS 5D Mark IV is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom on the housing.
PORTS AND EXTENSION RING
A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Canon EOS 5D Mark IV. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.
LIGHTING
The housing for Canon EOS 5D Mark IV offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up in manual mode.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth 100 metres. Different accessories can be fitted by means of M8 hole positioned on upper side of the housing and double threaded M6 holes located on housing bottom side.
Highlights
Ergonomic side handles, adjustable (via optional accessory)
Two fiber optic connectors, not included
Two standard electrical sync cord bulkheads Nikonos N5 or S6 not included
Back housing completely detachable from the front housing;
Tray with lock for an easy fitting of the camera
Single-hand closing knob for back housing
One M16 port for installation of accessories, e.g. vacuum valves or monitors
Aluminum buttons and dials with engraved symbols identical to camera controls
All camera controls are external
Wide back display viewfinder glass
Optical viewfinder
Dual O-Ring seals on all buttons and removable parts
Moisture sensor with LED and audible indicator (replaceable battery)
Removable port - 120mm bayonet
Ports security latch to prevent accidental opening
Wide, rubber covered feet for solid footing
M8 hole located on upper side of the housing for various accessories such as focus lights
wo M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods
External viewfinders can be mounted, INON X-2 compatible
An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater.
Product details
The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible.
ONE HAND OPEN/CLOSE
The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing.
PORTS AND EXTENSION RING
A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 / Z6. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum.
Controls
ON/OFF of Nikon Z7 / Z6
Ergonomic camera focusing and shutter button for an easy use with gloves
Lens release
Rear control panel
Upper control panel
All controls are available on the housing
Highlights
Ergonomic side handles, adjustable (via optional accessory)
Two fiber optic connections
Two optional electrical sync cord bulkheads
Back housing completely detachable from the front housing
Dedicated REC lever and ISO button
Tray with lock for an easy fitting of the camera
Single-hand closing knob for back housing
Three M16 hole for installation of accessories, e.g. vacuum valves or monitors
Aluminum buttons and dials with engraved symbols identical to camera controls
All camera controls are external
Wide back display viewfinder glass
Optical viewfinder
Double O-Ring seals on all buttons and removable parts
Moisture alarm with LED and an acoustic warning signal (replaceable battery)
Removable port - 120mm bayonet
Ports security latch to prevent accidental opening
Wide, rubber covered feet for solid footing
One M8 hole located on upper side of the housing for various accessories such as focus lights
Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods
External viewfinders can be mounted, INON X-2 compatible
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons.
The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting.
The enclosure is very stable due to the sturdy and wide rubber feet on the underside.
Open and close with one hand
It is very easy to open and close the Sony a7III without any effort by the user thanks to the upper spiral channel and the lower centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place.
Ports and extension rings
A range of ports and extension rings are available in the relevant section. The detachable port mounts to the Sony a7III body thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and Performance.
Light
Two fibre optic ports allow the use of external flashes through the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors.
Construction and safety
Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom.
Operation
Sony a7 III ON/OFF
Ergonomic camera focus and shutter release for easy gloved operation
Lens release
Rear control panel
Upper control panel
All controls are on the body
Special features
Ergonomic side handles, adjustable (via optional accessories);
Two fibre optic ports;
Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;
The rear enclosure is fully detachable from the front enclosure;
Locking compartment for easy camera insertion;
One-handed locking button for the rear housing;
Aluminium buttons and dials with engraved symbols identical to the camera controls;
Viewfinder glass with wide back;
Double O-ring seals on all buttons and removable parts;
Humidity sensor with LED indicator (replaceable battery);
Detachable port -120 mm bayonet;
Safety lock on ports to prevent accidental opening;
Wide, rubberised feet for firm footing on boat bottoms or seabed;
M8 hole at the top of the housing for various accessories such as focusing lights;
Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods;
External viewfinders can be mounted, INON X-2 compatible;
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons.
The rear flap has a large window glass for a fine camera display and optical viewfinder and is completely separated from the front body to facilitate camera mounting.
The enclosure is very stable due to the sturdy and wide rubber feet on the underside.
Can be opened and closed with one hand
It is very easy to open and close the Sony a7R III without the user having to do so using the top spiral and bottom centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera securely in place.
Ports and extension ring
A range of port and extension rings are available in the relevant section. The detachable port mounts to the Sony a7R III body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and Performance.
Light
Two fibre optic ports allow the use of an external flash via the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors.
Construction and safety
Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the Bottom.
Operation
Sony a7R III ON/OFF
Ergonomic camera focus and shutter release for easy gloved operation
Lens release
Rear control panel
Upper control Panel
All controls are on the body
Features:
Ergonomic side handles, adjustable (via optional accessories);
Two fibre optic ports;
Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;
The rear enclosure is fully detachable from the front enclosure;
Locking compartment for easy camera insertion;
One-handed locking button for the rear housing;
Aluminium buttons and dials with engraved symbols identical to the camera controls;
Viewfinder glass with wide back;
Double O-ring seals on all buttons and removable parts;
Humidity sensor with LED indicator (replaceable battery);
Detachable port -120 mm bayonet;
Safety lock on ports to prevent accidental opening;
Wide, rubberised feet for firm footing on boat bottoms or seabed;
M8 hole at the top of the housing for various accessories such as focusing lights;
Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods;
External viewfinders can be mounted, INON X-2 compatible;
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons.
The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting.
The enclosure is very stable due to the sturdy and wide rubber feet on the underside.
Open and close with one hand
It is very easy to open and close the Sony a7 II, without any effort on the part of the user, the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place.
Ports and extension rings
A range of connectors and extension rings are available in the relevant section. The detachable port mounts to the Sony a7 II body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance.
Light
Two fibre optic ports are located in front of the built-in flash and allow the use of an external flash.
Construction and safety
Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom.
Operation
Sony a7II ON/OFF
Ergonomic camera focus and shutter release for easy operation with gloves on
Lens release
Rear control panel
Upper control panel
All controls are on the body
Special features:
Ergonomic side handles, adjustable (via optional accessories);
Two fibre optic ports;
Two M16 ports for installation of accessories, e.g. vacuum valves or monitors;
The rear housing is completely detachable from the front housing;
Locking compartment for easy camera insertion;
One-hand lock for the rear housing;
Aluminium buttons and dials with engraved symbols identical to the camera controls;
Viewfinder glass with wide back and optical viewfinder;
Double O-ring seals on all buttons and removable parts;
Humidity sensor with LED indicator (replaceable battery);
Detachable port -120 mm bayonet;
Safety lock on ports to prevent accidental opening;
Wide, rubberised feet for firm footing on boat bottoms or seabed;
M8 hole at the top of the housing for various accessories such as focusing lights;
Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods;
External viewfinders can be mounted, INON X-2 compatible;
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons.
The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting.
The enclosure is very stable due to the sturdy and wide rubber feet on the underside.
Open and close with one hand
It is very easy to open and close the Sony a7R II, without any effort on the part of the user, the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place.
Ports and extension rings
A range of ports and extension rings are available in the relevant section. The detachable port mounts to the Sony a7R II body thanks to markers and a 120mm bayonet mount. The interchangeable port housings and extension rings allow the use of most lenses on the market for maximum versatility and performance.
Light
Two fibre optic ports are located in front of the built-in flash and allow the use of an external flash.
Construction and safety
Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom.
Operation
Sony a7R II ON/OFF
Ergonomic camera focus and shutter release for easy gloved operation
Lens release
Rear control panel
Upper control panel
All controls are on the body
Special features:
Ergonomic side handles, adjustable (via optional accessories);
Two fibre optic ports;
Two M16 ports for installation of accessories, e.g. vacuum valves or monitors;
The rear housing is completely detachable from the front housing;
Locking compartment for easy camera insertion;
One-hand lock for the rear housing;
Aluminium buttons and dials with engraved symbols identical to the camera controls;
Viewfinder glass with wide back and optical viewfinder;
Double O-ring seals on all buttons and removable parts;
Humidity sensor with LED indicator (replaceable battery);
Removable port - 120 mm bayonet;
Safety lock on ports to prevent accidental opening;
Wide, rubberised feet for firm footing on boat bottoms or seabed;
M8 hole at the top of the housing for various accessories such as focusing lights;
Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods;
External viewfinders can be mounted, INON X-2 compatible
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
PayPal:
The cookie is used for payment processing via PayPal.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
CAPTCHA integration
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Timezone:
The cookie is used to provide the system with the user's current time zone.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Cookies used for statistics and shop performance metrics.
Google Analytics
Google Tagmanager
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Hotjar:
Hotjar cookies are used to analyze website activities of users. The site user is identified by the cookie over several page views and his or her behavior is analyzed.
Yandex Metrica:
Yandex Metrica cookies are used for traffic analysis of the website. Statistics on website activity can be created and read.
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
Tawk:
Tawk provides a live chat for site users. The cookie ensures the function of the application over several page views.
Gross / net prices setting
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Local Storage:
Stores a timestamp to hide elements for a certain time if desired.
Wishlist
This website uses cookies to ensure the best experience possible. More information...