TTL flash trigger for Nikon

The housing for Nikon D780 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Nikon D780 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon D780 is closed with Isotta?s single handed one-turn knob. It?s the only single latch closing mechanism in the DSLR housing market. It?s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon D780. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. TTL CONVERTER FLASH (optional) The housing for Nikon D780 features TTL Converter Electronics for Automatic flash control. It also offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 hole positioned on the upper side of the housing and double threaded M6 holes located on housing bottom side. Highlights: Ergonomic side handles, adjustable (via optional accessory) TTL converter electronics for automatic flash control not icluded Two fiber optic connectors Two electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera; Single-hand closing knob for back housing Two M16 holes for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder and top window for display Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripod External viewfinders can be mounted, INON X-2 compatible

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D500 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible. Open and close with one hand The housing for the Nikon D500 is locked with Isotta's one-handed, one-turn knob. It is the only single locking mechanism on the DSLR housing market. It's quick, easy and secure thanks to its double steel pins on the underside of the housing. Ports and extensions A range of connectors and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D500 thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance. TTL converter included The Nikon D500 housing features TTL converter electronics for automatic flash control. It also offers the possibility of using external flashes via two standard light connectors as well as two optional Nikonos sync cable bulkheads. This allows for easy mounting of all flash and lighting equipment.  Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. So small and so rich in technology! Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted by means of an M8 hole on the top of the enclosure and double threaded M6 holes on the bottom of the enclosure. Special features Ergonomic side grips, adjustable (via optional accessories) TTL converter electronics for automatic flash control included in scope of delivery Two fibre optic connectors Two sockets with electrical sync cable Rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 socket for mounting accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture alarm with LED and audible warning (replaceable battery) Removable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focus lamps Two M6 holes on the bottom of the body for various accessories such as flash or tripod mounts External viewfinders can be mounted, INON X-2 compatible

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. The Nikon Z7 II / Z6 II Underwater Housing by Isotta The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6 and Nikon Z7 II / Z6 II. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The Isotta underwater housing for Nikon Z7 II / 6 II is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 II / Z6 II. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls ON/OFF of Nikon Z7 II / Z6 II Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two optional electrical sync cord bulkheads Back housing completely detachable from the front housing Dedicated REC lever and ISO button Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing One M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

Through techniques and innovations based on years of experience, an easy-to-use, highly professional product has been created. Perfect handling of the Nikon D7200 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable even during long dives. Easy access to all major camera controls through clearly labeled, laser engraved, durable buttons, even when wearing gloves and dry diving gloves. Quick and easy camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is fully separated from the front body for easy camera mounting. External viewfinders can be mounted, INON X-2 compatible.  Open and close with one hand. The housing for the Nikon D7200 is closed with Isotta's one-handed knob. It is the only single locking closure mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the bottom of the case. Ports and extension rings. A number of ports and extension rings are available in a special section. The detachable port is mounted to the Nikon D7200 thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing for the Nikon D7200 offers the ability to use external flashes via two standard light ports as well as two Nikonos sync cord ports. This allows for easy mounting of all flash and lighting equipment. Construction and Safety Only the best materials are used in the manufacture of our housings, such as anodized aluminum, which is corrosion resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red alarm for moisture/water inside the case is powered by a user replaceable battery. Working depth 100 meters. Various accessories can be attached using the M8 hole on the top of the walker and the double M6 threaded holes on the bottom of the walker. Special features. Ergonomic side handles, adjustable (ür via optional accessory) Two fiber optic ports Two connectors with electrical sync cable The rear enclosure is fully detachable from the front enclosure Pocket with latch for easy camera mounting One-hand lock for the rear housing An M16 connector für installation of accessories, such as vacuum valves or monitors. Aluminum buttons and dials with engraved symbols identical to the camera controls. All camera controls are external Searcher glass with wide Rück side. Optical viewfinder Double O-ring seals on all knobs and removable parts. Humidity sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Safety latch on ports to prevent accidental Öopening Wide, rubberized feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights. Two M6 holes on the bottom of the housing for various accessories such as mounts for flashes or tripods. External viewfinders can be mounted, INON X-2 compatible.

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D810 body is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible.  Opening and closing with one hand The housing for Nikon D810 is locked with Isotta's one-handed one-turn knob. It is the only single locking mechanism on the DSLR housing market. It's quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extension rings A range of ports and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D810 thanks to markers and a 120mm bayonet mount. The interchangeable port and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing for the Nikon D810 offers the possibility to use external flashes via two standard light connectors. This allows easy mounting of all flash and lighting equipment. Connectors for electric flash cables are optionally available. Talk to us! Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing. Special features: Ergonomic side handles, adjustable (via optional accessories) Two fibre optic connections Two connections with electrical sync cable The rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 connector for installation of accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 threads on the bottom of the body for various accessories such as mounts for flashes or tripods External viewfinders can be mounted, INON X-2 compatible

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D7100 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible.  Open and close with one hand The housing for the Nikon D7100 is closed with the Isotta one-handed knob. It is the only single locking mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extension rings A range of connectors and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D7100 thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance.  Light The housing for the Nikon D7100 offers the possibility to use external flashes via two standard light connectors as well as two Nikonos sync cable connectors. This allows for easy mounting of all flash and lighting equipment. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing.   Special features: Ergonomic side handles, adjustable (via optional accessories) Two fibre optic outlets Two outlets with electrical sync cable The rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 port for installation of accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Detachable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Product details The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 / Z6. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls ON/OFF of Nikon Z7 / Z6 Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two optional electrical sync cord bulkheads Back housing completely detachable from the front housing Dedicated REC lever and ISO button Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing One M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

The Isotta underwater housing for Nikon D850 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details Isotta underwater housing for Nikon D850 An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Nikon D850 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible.   ONE HAND OPEN/CLOSE The housing for Nikon D850 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon D850. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. TTL CONVERTER FLASH (optional) The housing for Nikon D850 features TTL Converter Electronics for Automatic flash control. It also offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 hole positioned on the upper side of the housing and double threaded M6 holes located on housing bottom side. Highlights Ergonomic side handles, adjustable (via optional accessory) TTL converter electronics for automatic flash control not included Two fiber optic connectors (included) Two electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing One M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D7500 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible.  Open and close with one hand The housing for the Nikon D7500 is closed with the Isotta one-handed knob. It is the only single locking mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extension rings A range of connectors and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D7500 thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing for the Nikon D7500 offers the possibility to use external flashes via two standard light connectors as well as two Nikonos sync cable connectors. This allows for easy mounting of all flash and lighting equipment. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing. Special features Ergonomic side handles, adjustable (via optional accessories) Two fibre optic connections Two connections with electrical sync cable The rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 x 1 hole for mounting accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights Two M6 holes on the bottom of the body for various accessories such as mounts for flashes or tripods External viewfinders can be mounted, INON X-2 compatible

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Isotta's Nikon Z9 Underwater Housing The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z9. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls On and off lever of the Nikon Z9 Ergonomic camera focusing and shutter lever, easy to use with gloves Lens release lever Front dial Fn1 lever Fn2 lever Fn3 lever ISO button MODE button BKT button Flash button +/- button Focus mode button Quick release-mode button Zoom knob Port safety lever Movie lever (REC) AF-ON lever Rear dial R Release mode knob I (info) button Menu button AEL button DISP. button Multi-selector Playback, Viewing pictures button Zoom-in (+) button Zoom-out (-) button Qual button WB button Delete button Fn4 button Photo/video selector On/Off Display lever Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections standard (to shoot it needs an additional trigger) Three M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port 120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible