HDMI 2.0 Cable M24A3R140-M28A1R170 by Nauticam
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Product number:
NA25094
This is the HDMI 2.0 cable necessary to use the NA-A7SIII with the 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player.
Note: this cable supports RAW 16bit 4.2K (4264 x 2408) up to 59.94p output but actual capture quality is subject to recorder capabilities.
| Monitor connection: | HDMI |
|---|
Technical data
to use the NA-A7SIII with Atomos Ninja V
Scope of delivery
HDMI 2.0 Cable M24A3R140-M28A1R170by Nauticam
Login
There aren't any asked questions yet.
Sony A7S III Underwater Housing by Nauticam
€3,775.00*
The long awaited Sony a7S III brings high frame-rate 4K video with incredible low-light sensitivity to the A7 full frame mirrorless lineup. The video-centric follow up to the a7S II adds internal 10-bit 4:2:2 4K capture at up to 120fps while building on the a7S II's already segment leading low-light capabilities. Upgrades also extend to the 9.44M dot OLED viewfinder, 759-point phase detection autofocus and reduced rolling shutter.
THE SONY ALPHA A7S III CAMERA
Built around a new 12.1MP Exmor RS BSI CMOS sensor coupled with a BIONZ XR image processor, the a7S III is a powerful video oriented mirrorless full-frame camera. The long awaited follow up to the a7 SII, which set the standard for low-light capabilities in the full-frame mirrorless segment, brings not only improvements to that key spec but also a host of other notable upgrades.
Key Camera Specs
12.1MP Exmor RS BSI CMOS sensor
ISO sensitivity of 40-409600
4K Video Capture at up to 120fps
Internal recording at up to 10-bit 4:2:2 color sampling
No recording time limit
16-bit raw video output over HDMI-A
759-Point phase-detection autofocus with 92% coverage
Dual UHS-II card slots
S-Log2/3 or HLG/BT.2020 gamma curves
5.5 Stop IBIS
The new sensor features 759 phase-detection and 425 contrast-detection autofocus points that cover approximately 92% of the image area and promises sensitivity down to -6 EV. Customizable seven-step AF transition speed and five-step AF subject shift sensitivity allows for fine tuning of the autofocus system. As expected, ISO sensitivity is expanded to ISO 40-409600.
A 5-axis in-body stabilization system provides 5.5 stops of camera movement, even with adapted lenses, which combined with the 120fps frame-rates help deliver ultra-smooth handheld video.
Video can be recorded in either All-I XAVC S-I at up to 600Mbps or XAVC HS which uses H.265 compression for smaller file sizes. Internal 4K recording uses 1:1 pixel readout at up to 120fps with 10-bit 4:2:2 sampling. The a7S III offers extensive color customization including the S-Log2 and S-Log3 gamma curves that can deliver 15+ stops of dynamic range. HLG and BT.2020 color spaces are also available. Recording time limits have been removed and improved heat dissipation has been added to the camera body's design. Internal recording is to UHS-II rated dual card slots that support CFexpress Type A or SD cards. External recording of 16-bit raw video is possible via the full size HDMI port when used with compatible Recorders.
NAUTICAM NA-A7SIII UNDERWATER HOUSING
Nauticam is the leader in producing intuitively designed precision manufactured aluminum underwater housings for the Sony a7 camera line and continues to innovate with the new NA-A7SIII housing.
The NA-A7SIII is designed to maximize the video-centric capabilities of the Sony a7S III camera while maintaining it's strong still image potential. The NA-A7SIII is built around the N100 port system that is shared with the rest of the Nauticam housing lineup for the Sony full-frame mirrorless a7 series. The N100 system includes a dull range of both macro and wide-angle ports as well as delivering access to the lineup of Nauticam's professional wet optics that are optimized for underwater imaging such as the WACP-1/2 and the SMC-1/2 lenses. These optics deliver unparalleled image quality underwater expanding what is possible with the powerful a7S III camera.
HDMI Output
The a7S III can output 16-bit raw video signal over HDMI and the NA-A7SIII features an M24 bulkhead that supports the HDMI 2.0 standard. This allows the NA-A7SIII to be used in conjunction with either a recording monitor such as the Atomos Ninja V in the NA-NinjaV housing via HDMI 2.0 or standalone monitors such as the SmallHD 502 Bright in the NA-502B housings via HDMI 1.4.
Optional Magnifying Viewfinder
The a7S III camera features an updated 9.44M-dot OLED viewfinder with a 120fps refresh rate. Nauticam's line of optional magnifying viewfinders, available in both an angled 45º (32203) or straight 180º (NA32201) configuration provide enhanced viewing ability as well as a dioptric adjustment knob that can used underwater. Installation can be achieved without tools in less than a minute.
Mission Control
Nauticam engineer's Mission Control design philosophy means controls are intuitively placed where they are needed most regardless of their position on the camera. The NA-A7SIII features a double thumb lever within easy reach of the right handle that triggers the AF-ON and RECORD controls of the camera. A thumb lever on the left side toggles the PLAYBACK button. The back panel of the housing provides access to all other rear camera controls including a multidirectional pad.
Vacuum Check and Leak Detection System
The Nauticam vacuum check and leak detection system is shipped with NA-A7SIII as standard equipment. With the addition of the optional M14 Vacuum Valve (NA25624) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
Atomos Ninja V Underwater housing by Nauticam
€2,435.00*
With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater.
Atomos Ninja V
The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video.
EXPOSURE TOOLS
The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard..
FOCUS TOOLS
Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas.
THE NAUTICAM NA-NINJA V UNDERWATER HOUSING
The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0.
The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal.
The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing.
Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.
on stock
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)
€55.00*
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)
Atomos Shogun/Ninja Inferno/Flame (HDMI 2.0) Underwater Housing by Nauticam
€4,435.00*
The Nauticam Atomos Flame housing supports the Atomos Shogun Inferno and Shogun Flame, as well as the Ninja Inferno and Ninja Flame external recorders and monitors. This enclosure is equipped with an M28 pass-through for HDMI 2.0 cables.
The enclosure offers an unobstructed view of the excellent 7" screen and provides access to the main touchscreen functions via buttons on the underside of the panel.
Problem-free installation
Installing Atomos Shogun or Ninja recorders couldn't be easier with the Nauticam Atomos Flame housing. The monitor simply slides in and is secured with three rotating latches. The back of the monitor is fully accessible, making media and battery changes quick and easy.
Built-in cooling
The processing power required to record professional video formats is enormous, and this workload generates heat. Shogun uses a cooling rail to dissipate heat in the air and to ensure normal operating temperatures in the water. Therefore, the Nauticam enclosure uses two active fans. These fans distribute the heat across the back of the enclosure where it can be effectively transferred into the water.
The cooling system is powered by a dedicated Sony NP-F550 battery that provides approximately 12 hours of operation on a single charge. An LED light and external switch allow the fans to be switched on and off from the outside of a sealed enclosure.
The Nauticam Atomos Flame housing supports all Sony NP-F batteries with the exception of the NP-F970 and Atomos NP-960 as they are too large for the housing.
Vacuum testing and leak detection system
The Nauticam vacuum testing and leak detection system and vacuum valve are included as standard in the Shogun enclosure. This monitoring system provides constant updates on the watertight and safe condition of the enclosure. A simple coded LED lighting system indicates to the user that the vacuum is tight or that the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water Ingress.
Sony A7R V Underwater Housing by Nauticam
€3,938.00*
With each new generation of camera, Sony continues to make giant strides in the way images are taken and processed. The Sony a7R V shares the same 61MP sensor as the previous a7R IV, however it has made huge advancements in processing capacity which brings improvements across the board. With a newly developed AI processing unit, the Sony a7R V brings an all new autofocus system which builds upon more intelligent subject tracking and recognition. The a7R V features 8 stops of image stabilization and an impressive array of video capabilities including 8K 10-Bit internal recording and 16-Bit RAW external recording over HDMI which are sure to make this a popular choice among underwater shooters.
The Sony alphy 7R V Camera
The Sony a7R V is Sony’s fifth generation, high-resolution full-frame mirrorless camera. The 61.0-megapixel full-frame back-illuminated Exmor R CMOS sensor combined with BIONZ XR imaging engine delivers unprecedented resolution, fine gradation, and low noise at a processing speed increased by 8x that of the a7R IV. Relative to previous generations, it promises more robust build quality, refined controls, and the company's latest autofocus.
The new processor brings the power to significantly enhance the camera's subject recognition capabilities for auto focus. The a7R IV had the ability to recognize and prioritize people, their faces and eyes, but the a7R V takes this much further. The a7R V is designed to better recognize human subjects but also trained to recognize a wider range of non-human subject types.
In addition to 8K shooting, 4K video is oversampling from 6.2k pixels without binning, to deliver maximum detail, and offers up to 60p shooting and S-Cinetone for superior cinematic expression. The camera also gives the creative freedom to continuously shoot up to 583 compressed RAW images at 10 fps.
Camera Specs
61.0 MP full-frame back-illuminated Exmor R™ CMOS sensor
Next-generation AF with Real-time Recognition autofocus deep learning AI
4K 16-Bit Raw Output; S-Log3/S-Cinetone
8K 24p, 4K 60p, FHD 120p 10-Bit Video
3.2" 4-Axis Multi-Angle Touchscreen LCD
8-Stop 5-Axis Image Stabilization
Continuously shoot up to 583 compressed RAW images at 10 fps
9.44m-Dot EVF with 120 fps Refresh Rate
Setup-Example
Nauticam NA-A7R V Underwater Housing
The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.
The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.
MISSION CONTROL
The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.
The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.
CAMERA COMPATIBILITY
The NA-A7RV housing is compatible with both the Sony a7R V and the Sony a7 IV. To use the Sony a7 IV, the NA17433UK Conversion Kit is required.
HDMI 2.0
A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders. An additional M10 threaded mounting position near the front center of the housing also makes using an external monitor even easier. The Sony a7R V can output 16-bit RAW video output to external recorders at up to 4K 60p. See the resources sidebar for additional details and recommended setups.
PREMIUM PROFESSIONAL OPTICS
Built around the N100 Port System for Sony E-Mount, the NA-A7RV can support a wide variety of native lenses with a selection of Optical Glass and Acrylic ports. When used with an E-Mount to EF-mount lens adapter and an N100 to N120 adapter (see Resources sidebar for supported adapters), the NA-A7RV can be used with the Canon N120 EF-Mount port system, expanding the capabilities of the system even further. Going beyond conventional optics the NA-A7RV can leverage the unparalleled optical quality of Nauticam's Water Contact optics such as the WACP-1 or WWL-1B which offers up to 130º field-of-view, full zoom through, an almost 0" minimum focus distance with supported lenses. For macro, the SMC-1 and SMC-2 deliver tack-sharp super-macro magnification levels up to 4x with the Sony 90mm macro lens.
VACUUM CHECK AND LEAK DETECTION
The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (NA25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
STROBE TRIGGERING
Triggering of external strobes is accomplished via the integrated fiber-optic bulkheads when using the optional Mini Flash Trigger for Sony (NA26302). Electronic triggering is also available via an optional Nikonos or Ikelite Style Bulkhead.
JTL Cross-selling
Sony A7S III Underwater Housing by Nauticam
€3,775.00*
The long awaited Sony a7S III brings high frame-rate 4K video with incredible low-light sensitivity to the A7 full frame mirrorless lineup. The video-centric follow up to the a7S II adds internal 10-bit 4:2:2 4K capture at up to 120fps while building on the a7S II's already segment leading low-light capabilities. Upgrades also extend to the 9.44M dot OLED viewfinder, 759-point phase detection autofocus and reduced rolling shutter.
THE SONY ALPHA A7S III CAMERA
Built around a new 12.1MP Exmor RS BSI CMOS sensor coupled with a BIONZ XR image processor, the a7S III is a powerful video oriented mirrorless full-frame camera. The long awaited follow up to the a7 SII, which set the standard for low-light capabilities in the full-frame mirrorless segment, brings not only improvements to that key spec but also a host of other notable upgrades.
Key Camera Specs
12.1MP Exmor RS BSI CMOS sensor
ISO sensitivity of 40-409600
4K Video Capture at up to 120fps
Internal recording at up to 10-bit 4:2:2 color sampling
No recording time limit
16-bit raw video output over HDMI-A
759-Point phase-detection autofocus with 92% coverage
Dual UHS-II card slots
S-Log2/3 or HLG/BT.2020 gamma curves
5.5 Stop IBIS
The new sensor features 759 phase-detection and 425 contrast-detection autofocus points that cover approximately 92% of the image area and promises sensitivity down to -6 EV. Customizable seven-step AF transition speed and five-step AF subject shift sensitivity allows for fine tuning of the autofocus system. As expected, ISO sensitivity is expanded to ISO 40-409600.
A 5-axis in-body stabilization system provides 5.5 stops of camera movement, even with adapted lenses, which combined with the 120fps frame-rates help deliver ultra-smooth handheld video.
Video can be recorded in either All-I XAVC S-I at up to 600Mbps or XAVC HS which uses H.265 compression for smaller file sizes. Internal 4K recording uses 1:1 pixel readout at up to 120fps with 10-bit 4:2:2 sampling. The a7S III offers extensive color customization including the S-Log2 and S-Log3 gamma curves that can deliver 15+ stops of dynamic range. HLG and BT.2020 color spaces are also available. Recording time limits have been removed and improved heat dissipation has been added to the camera body's design. Internal recording is to UHS-II rated dual card slots that support CFexpress Type A or SD cards. External recording of 16-bit raw video is possible via the full size HDMI port when used with compatible Recorders.
NAUTICAM NA-A7SIII UNDERWATER HOUSING
Nauticam is the leader in producing intuitively designed precision manufactured aluminum underwater housings for the Sony a7 camera line and continues to innovate with the new NA-A7SIII housing.
The NA-A7SIII is designed to maximize the video-centric capabilities of the Sony a7S III camera while maintaining it's strong still image potential. The NA-A7SIII is built around the N100 port system that is shared with the rest of the Nauticam housing lineup for the Sony full-frame mirrorless a7 series. The N100 system includes a dull range of both macro and wide-angle ports as well as delivering access to the lineup of Nauticam's professional wet optics that are optimized for underwater imaging such as the WACP-1/2 and the SMC-1/2 lenses. These optics deliver unparalleled image quality underwater expanding what is possible with the powerful a7S III camera.
HDMI Output
The a7S III can output 16-bit raw video signal over HDMI and the NA-A7SIII features an M24 bulkhead that supports the HDMI 2.0 standard. This allows the NA-A7SIII to be used in conjunction with either a recording monitor such as the Atomos Ninja V in the NA-NinjaV housing via HDMI 2.0 or standalone monitors such as the SmallHD 502 Bright in the NA-502B housings via HDMI 1.4.
Optional Magnifying Viewfinder
The a7S III camera features an updated 9.44M-dot OLED viewfinder with a 120fps refresh rate. Nauticam's line of optional magnifying viewfinders, available in both an angled 45º (32203) or straight 180º (NA32201) configuration provide enhanced viewing ability as well as a dioptric adjustment knob that can used underwater. Installation can be achieved without tools in less than a minute.
Mission Control
Nauticam engineer's Mission Control design philosophy means controls are intuitively placed where they are needed most regardless of their position on the camera. The NA-A7SIII features a double thumb lever within easy reach of the right handle that triggers the AF-ON and RECORD controls of the camera. A thumb lever on the left side toggles the PLAYBACK button. The back panel of the housing provides access to all other rear camera controls including a multidirectional pad.
Vacuum Check and Leak Detection System
The Nauticam vacuum check and leak detection system is shipped with NA-A7SIII as standard equipment. With the addition of the optional M14 Vacuum Valve (NA25624) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
Atomos Ninja V Underwater housing by Nauticam
€2,435.00*
With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater.
Atomos Ninja V
The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video.
EXPOSURE TOOLS
The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard..
FOCUS TOOLS
Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas.
THE NAUTICAM NA-NINJA V UNDERWATER HOUSING
The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0.
The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal.
The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing.
Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.
on stock
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)
€55.00*
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)
Atomos Shogun/Ninja Inferno/Flame (HDMI 2.0) Underwater Housing by Nauticam
€4,435.00*
The Nauticam Atomos Flame housing supports the Atomos Shogun Inferno and Shogun Flame, as well as the Ninja Inferno and Ninja Flame external recorders and monitors. This enclosure is equipped with an M28 pass-through for HDMI 2.0 cables.
The enclosure offers an unobstructed view of the excellent 7" screen and provides access to the main touchscreen functions via buttons on the underside of the panel.
Problem-free installation
Installing Atomos Shogun or Ninja recorders couldn't be easier with the Nauticam Atomos Flame housing. The monitor simply slides in and is secured with three rotating latches. The back of the monitor is fully accessible, making media and battery changes quick and easy.
Built-in cooling
The processing power required to record professional video formats is enormous, and this workload generates heat. Shogun uses a cooling rail to dissipate heat in the air and to ensure normal operating temperatures in the water. Therefore, the Nauticam enclosure uses two active fans. These fans distribute the heat across the back of the enclosure where it can be effectively transferred into the water.
The cooling system is powered by a dedicated Sony NP-F550 battery that provides approximately 12 hours of operation on a single charge. An LED light and external switch allow the fans to be switched on and off from the outside of a sealed enclosure.
The Nauticam Atomos Flame housing supports all Sony NP-F batteries with the exception of the NP-F970 and Atomos NP-960 as they are too large for the housing.
Vacuum testing and leak detection system
The Nauticam vacuum testing and leak detection system and vacuum valve are included as standard in the Shogun enclosure. This monitoring system provides constant updates on the watertight and safe condition of the enclosure. A simple coded LED lighting system indicates to the user that the vacuum is tight or that the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water Ingress.
Sony A7R V Underwater Housing by Nauticam
€3,938.00*
With each new generation of camera, Sony continues to make giant strides in the way images are taken and processed. The Sony a7R V shares the same 61MP sensor as the previous a7R IV, however it has made huge advancements in processing capacity which brings improvements across the board. With a newly developed AI processing unit, the Sony a7R V brings an all new autofocus system which builds upon more intelligent subject tracking and recognition. The a7R V features 8 stops of image stabilization and an impressive array of video capabilities including 8K 10-Bit internal recording and 16-Bit RAW external recording over HDMI which are sure to make this a popular choice among underwater shooters.
The Sony alphy 7R V Camera
The Sony a7R V is Sony’s fifth generation, high-resolution full-frame mirrorless camera. The 61.0-megapixel full-frame back-illuminated Exmor R CMOS sensor combined with BIONZ XR imaging engine delivers unprecedented resolution, fine gradation, and low noise at a processing speed increased by 8x that of the a7R IV. Relative to previous generations, it promises more robust build quality, refined controls, and the company's latest autofocus.
The new processor brings the power to significantly enhance the camera's subject recognition capabilities for auto focus. The a7R IV had the ability to recognize and prioritize people, their faces and eyes, but the a7R V takes this much further. The a7R V is designed to better recognize human subjects but also trained to recognize a wider range of non-human subject types.
In addition to 8K shooting, 4K video is oversampling from 6.2k pixels without binning, to deliver maximum detail, and offers up to 60p shooting and S-Cinetone for superior cinematic expression. The camera also gives the creative freedom to continuously shoot up to 583 compressed RAW images at 10 fps.
Camera Specs
61.0 MP full-frame back-illuminated Exmor R™ CMOS sensor
Next-generation AF with Real-time Recognition autofocus deep learning AI
4K 16-Bit Raw Output; S-Log3/S-Cinetone
8K 24p, 4K 60p, FHD 120p 10-Bit Video
3.2" 4-Axis Multi-Angle Touchscreen LCD
8-Stop 5-Axis Image Stabilization
Continuously shoot up to 583 compressed RAW images at 10 fps
9.44m-Dot EVF with 120 fps Refresh Rate
Setup-Example
Nauticam NA-A7R V Underwater Housing
The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.
The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.
MISSION CONTROL
The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.
The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.
CAMERA COMPATIBILITY
The NA-A7RV housing is compatible with both the Sony a7R V and the Sony a7 IV. To use the Sony a7 IV, the NA17433UK Conversion Kit is required.
HDMI 2.0
A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders. An additional M10 threaded mounting position near the front center of the housing also makes using an external monitor even easier. The Sony a7R V can output 16-bit RAW video output to external recorders at up to 4K 60p. See the resources sidebar for additional details and recommended setups.
PREMIUM PROFESSIONAL OPTICS
Built around the N100 Port System for Sony E-Mount, the NA-A7RV can support a wide variety of native lenses with a selection of Optical Glass and Acrylic ports. When used with an E-Mount to EF-mount lens adapter and an N100 to N120 adapter (see Resources sidebar for supported adapters), the NA-A7RV can be used with the Canon N120 EF-Mount port system, expanding the capabilities of the system even further. Going beyond conventional optics the NA-A7RV can leverage the unparalleled optical quality of Nauticam's Water Contact optics such as the WACP-1 or WWL-1B which offers up to 130º field-of-view, full zoom through, an almost 0" minimum focus distance with supported lenses. For macro, the SMC-1 and SMC-2 deliver tack-sharp super-macro magnification levels up to 4x with the Sony 90mm macro lens.
VACUUM CHECK AND LEAK DETECTION
The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (NA25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
STROBE TRIGGERING
Triggering of external strobes is accomplished via the integrated fiber-optic bulkheads when using the optional Mini Flash Trigger for Sony (NA26302). Electronic triggering is also available via an optional Nikonos or Ikelite Style Bulkhead.