M28C1R215-M28A1R170 HDMI 2.0 Cable

The Nikon D6 is the brand's latest professional level DSLR that packs incredible autofocus capabilities and superior image quality to allow for capturing images and video in even the most challenging lighting situations or during the fastest action.  The D6';s rugged exterior is built around a full-frame 20MP CMOS sensor paired with Nikon's 105-point triple-sensor autofocus system that can allow the D6 to focus at even -4.5EV.  The D6 can also capture UHD 4K video at up to 30fps with a 1.5x crop. THE NIKON D6 DSLR CAMERA Nikon's professional DSLR camera bodies are designed to give the highest possible image quality along with industry leading intelligent autofocus in a package that is robust and reliable regardless of the conditions.  The 20MP CMOS sensor, powered by Nikon's latest EXPEED 6 processor works in tandem with the brand's most powerful autofocus system to insure sharp images with incredible detail and the lowest levels of noise and distortion possible. Camera Specs 20.8 MP CMOS Sensor with EXPEED 6 Processor 100-102,400 ISO (expandable to 3,280,000) 105-point Autofocus System 14fps continuos shooting UHD 4K 30p video with ~1.5x crop The 105-point cross-type AF system reduces the amount of non-AF-sensitive areas in the frame and with the new 17 custom Group Area AF function, autofocus can be tuned to match the scene type.  The D6 can shoot at up to 14fps continuous shooting at ISO levels up to 102,400 (expandable to 3,280,000). In addition to still images, the D6 captures UHD 4K video with an ~1.5x crop factor at up to 30p.  An HDMI output allows for the use of external monitors and recorders.  A 1000BASE-T LAN connection also allows for external control or image transfer at speeds up to 15% faster than with the D5. The Nikon D6 features 14 customizable controls, allowing the user quick access to their most needed functions.  The Custom Settings Menu can hold up to four custom shooting combinations making switching between different scene types faster and more reliable.   The EN-EL18c Li-ion battery delivers up to 3,580 shots per charge or up to 105 minutes of video recording. The D6 features dual XQD/CFexpress card slots which can be setup to record in an overflow or backup configuration. THE NAUTICAM NA-D6 UNDERWATER HOUSING Nauticam's lineup of aluminum housings are designed with the user in mind offering easy assembly, proven durability, intuitive control placement and an extensive range of optics and accessories.  The NA-D6 is designed specifically for the Nikon D6 to take advantage of the camera's customizability and powerful autofocus features. MISSION CONTROL The NA-D6 is designed with the Mission Control philosophy, placing the most used controls within easy reach from the ergonomic handles.  The NA-D6 features double thumb levers at the rear of the housing that trigger the AF-ON and REC buttons of the camera on the right side and PLAYBACK/INFO on the left.  Nested levers for ISO and the 'Pv' control are also located near the right handle for easy access.  A dual action lever for 'Fn1' and 'Fn2' customizable buttons a the front of the camera has been redesigned for enhanced usability over the NA-D5 version. HMDI AND ETHERNET Connectivity to external monitors via HDMI or external controls over Ethernet are facilitated through the bulkheads of the NA-D6.  The housing has M28 and M14 bulkheads at the front and a rear M16.  Check the Resources section for compatible monitor and ethernet configurations. FLASH TRIGGERING The NA-D6 ships with a pre-installed manual LED flash trigger which provides reliable flash triggering for the majority of optically triggered external underwater strobes.  A TTL version of the flash trigger (NA26308) is also available to provide automatic exposure control with compatible strobes. OPTICS AND ACCESSORIES The Nauticam N120 Port System supports a wide variety of Nikon F Mount lenses with both optical glass and acrylic port options.  The NA-D6 can also take advantage of Nauticam's water-contact optics such as the WACP-1, WACP-2 as well as the SMC-1 and SMC-2 which are designed to deliver the highest image quality possible underwater for both wide-angle and macro. Nauticam's magnifying viewfinders, available in both 45º and 180º versions allow for easier use of the D6's large bright optical viewfinder and can be installed in minuted without tools.

Introducing NA-1DXIII The Canon EOS-1D X MARK III Camera  The Canon EOS-1D X Mark III is the brand's flagship DSLR camera is constructed around a redesigned 20.1MP CMOS full-frame sensor.  The new sensor is designed to give the camera both exceptional still and motion picture capabilities that satisfy the professional image and filmmaker's criteria.   Resolution, Speed and Sensitivity The 20.1MP CMOS sensor has the highest ISO range of any Canon EOS camera at 100-102,400 with expandability options for a low of 50 and a high of 819,200 equivalent.  In Live View the Mark III will capture 20fps, even with mechanical shutter and has a continuous burst rate of 1,000 RAW or RAW+JPEG images thanks to the enhanced DIGIC X processor and the use of CFexpress 2.0 recording media. Autofocus Canon's legendary Dual Pixel autofocus is the benchmark for underwater imaging.  With the Mark III, Canon has increased the number of AF zones to 525 and adds Servo AF for moving subjects and claims their Movie Servo AF can now operate down to -6 EV during video recording. Video Recording With 12-bit 5.5K RAW 60p internal recording, the EOS-1D X Mark III has positioned itself to not just maintain but also to grow the already large following it has in the underwater filmmaker community.  While RAW may not be for everyone, the Mark III can also record DCI 4K at 60p from the full sensor width in 10-bit 4:2:2 using the H.265 HEVC codec.  The ability to shoot using the full sensor was not possible with the Mark II and returns the full field-of-view so essential in wide-angle underwater video.  There is still the option to shoot cropped DCI 4K as well (using about 75% of the camera's sensor width) , giving some extra magnification when using macro lenses or even a little more zoom for wide-angle.  Video can be captured with the cinema Canon Log OETF profile.  This profile, developed for the C300 and C500 cinema cameras allows capture of the full 12 T-stop exposure latitude of the new sensor.   Durability and Battery The EOS-1D X Mark III has a 500,000 shutter release rating with reduced black-out and mirror bounce characteristics in addition to extensive weather sealing in keeping with it's position as the flagship DSLR.  For those migrating or adding the Mark III to a workflow containing the Mark II will rejoice in the Mark III's use of the same LP-E19 battery which delivers up to 2 hours of RAW or compressed 4K recording or a CIPA rated 2,850 still images using the viewfinder or 610 shots in Live View.  This is a dramatic increase from the Mark II which was rated at 1,210 and 260 shots respectively.  This long record time gives the Mark III a distinct advantage over mirrorless systems that may record similar quality levels but offer shorter battery life. The Nauticam NA-1DXIII Underwater Housing Nauticam has been providing innovative aluminum housings since the original EOS-1D X with each evolution adapting to the ever changing role this camera plays in underwater image making.  The NA-1DXIII adds a host of video-centric enhancements as well as more refined ergonomics and control access for all shooting situations.   Video Recording While the EOS-1D X Mark III can capture incredible 5.5K 12-bit RAW internally, it can also output uncompressed DCI or UHD 4K video over HDMI at up to 30p.  For those that prefer to use a more edit-friendly codec such as ProRes or DNX, the addition of an external monitor or recorder is an option.  The NA-1DXIII features the large-bore M28 bulkhead that supports Nauticam's HDMI 2.0 cable system and supported monitors/recorders such as the Atomos Ninja V.  The system also supports the HDMI 1.4 standard for use with non-recording monitor solutions such as the SmallHD 502 Bright and comes with an M28 to M16 step-down adapter pre-installed.  See the sidebar for recommended monitor housings and necessary connection accessories. Mission Controll Regardless of where a button or control dial may lie on the camera body, Nauticam engineers obsess over making sure that access to that control on the housing be intuitively placed for ease of use to insure no shot is missed while searching for a button or dial.  The NA-1DXIII features a double-action thumb lever reachable from the right handle that actuates the AF-ON and RECORD buttons on the rear of the camera.  A recessed dual-action lever that rests between the right handle and the housing triggers ISO and the M.Fn controls.  A dual-action thumb lever on the left side is for PLAYBACK/INFO and another dual-action lever on the front left of the housing os for the customizable PV and FN controls.  Large textured control dials on the right side access the main and sub command dials and a large dial on the left side is for controlling lenses equipped with manual focus or manual zoom gears. Flash Triggering The NA-1DXIII supports flash triggering via the built-in fiber-optic bulkheads atop the housing through the use of Nauticam's Manual or TTL flash triggers.  The manual flash trigger provides high speed optical triggering of supported strobes using LEDs powered by an internal user-replaceable battery.  For TTL, the Nauticam Canon TTL Flash Trigger can be used.  The NA-1DXIII also comes with two M14 5-pin Nikonos bulkheads pre-installed along with a Canon to dual Nikonos bulkhead hot-shoe cable for electronic strobe triggering.  The M14 bulkhead is installed along with an M16 to M14 step-down adapter. Integrated Vaccum Check and Leak Detection System The Nauticam vacuum check and leak detection system is shipped with NA-1DXIII as standard equipment. Combined with an accessory vacuum valve (PN 25625 for M16 or 25624 for M14), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. Premium Professional Optics Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater.  The Nauticam NA-1DXIII uses the same N120 Port System as the previous NA-1DXII which makes for a seamless transition for those upgrading to the Mark III.  While this system provides exceptional optical-glass and flat port solutions for a wide variety of EF-mount lenses, the real power of the EOS-1D X Mark III can be realized using Nauticam's Water Contact Optics.  This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations.  The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6.  The SMC-1 and SMC-2 macro wet-optics, when used with the Canon 100mm F2.8 macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 100mm lens itself can achieve in air without a magnifier.

With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS  The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas.   THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.  

The Nauticam Atomos Flame housing supports the Atomos Shogun Inferno and Shogun Flame, as well as the Ninja Inferno and Ninja Flame external recorders and monitors.  This enclosure is equipped with an M28 pass-through for HDMI 2.0 cables.   The enclosure offers an unobstructed view of the excellent 7" screen and provides access to the main touchscreen functions via buttons on the underside of the panel. Problem-free installation Installing Atomos Shogun or Ninja recorders couldn't be easier with the Nauticam Atomos Flame housing. The monitor simply slides in and is secured with three rotating latches. The back of the monitor is fully accessible, making media and battery changes quick and easy. Built-in cooling The processing power required to record professional video formats is enormous, and this workload generates heat. Shogun uses a cooling rail to dissipate heat in the air and to ensure normal operating temperatures in the water. Therefore, the Nauticam enclosure uses two active fans. These fans distribute the heat across the back of the enclosure where it can be effectively transferred into the water. The cooling system is powered by a dedicated Sony NP-F550 battery that provides approximately 12 hours of operation on a single charge.  An LED light and external switch allow the fans to be switched on and off from the outside of a sealed enclosure. The Nauticam Atomos Flame housing supports all Sony NP-F batteries with the exception of the NP-F970 and Atomos NP-960 as they are too large for the housing.   Vacuum testing and leak detection system The Nauticam vacuum testing and leak detection system and vacuum valve are included as standard in the Shogun enclosure.  This monitoring system provides constant updates on the watertight and safe condition of the enclosure.  A simple coded LED lighting system indicates to the user that the vacuum is tight or that the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water Ingress.