HDMI (D-A) 1.4 Cable in 240mm Length

THE BLACKMAGIC POCKET CINEMA CAMERA 6K More than just a 6K version of the already capable Pocket Cinema Camera 4K, the Pocket Cinema Camera 6K adds a larger Super35 sensor behind an EF lens mount. Bothy cameras feature the ability to capture full-resolution (6K at 6144 x 3456) capture at 60fps in BlackMagic RAW format. Dual Native ISO means there are two base ISO levels, ISO 400 for scenes with adequate natural light and ISO 3200 for those low-light situations. Each of the base ISO levels offers a similar level of dynamic range while minimizing noise in the image. The Pocket Cinema Camera 6K also supports the use of an external power supply and recording direct to external media via USB-C 3.1. An HDMI output (1080p) allows for the use of an external monitor or recorder. Key Camera Specs Super35 21.2MP 6K Sensor EF lens mount 6k (6144 x 3456) at 60p BlackMagic RAW and ProRes recording Dual Native ISO (400 and 3200) 13 stops of Dynamic Range THE NAUTICAM NA-BMPCC6K UNDERWATER HOUSING Nauticam is a leader in underwater cinema housings and the NA-BMPCC6K leverages this experience to create the ultimate tool for the Pocket Cinema Camera 6K owner. N120 Port System With the camera's new 6K Super35 sensor, the larger EF mount means the NA-BMPCC6K is designed around Nauticam's N120 Port System. The addition of cinema styled Zoom and Focus knobs to the housing adds to the flexibility of the system, allowing users to choose between N120 Cinema System EF-mount gears OR N120 DSLR Canon EF-mount gears. When used with the Cinema System gears, Focus and Zoom are controlled by the control dials on the housing, whereas with the standard DSLR style gears the function will be similar to that on a Nauticam DSLR housing with the Zoom controlled on the housing and Focus by the control gear on the port extension. In addition to the standard ports available in this system the NA-BMPCC6K will have access to the latest Nauticam premium professional optics such as the Wide Angle Conversion Port (WACP), the SMC-1/2 magnifiers. T5 SSD Support More than just an underwater housing, the NA-BMPCC6K is an underwater cinema platform. Inside the housing is dedicated notch for a Samsung T5 USB-C SSD. The BlackMagic Pocket Cinema Camera 6K can record directly to the T5, making the transition from capture to edit seamless. More Power The included Nauticam 18650 Battery Holder can hold 4 x 18650 lithium batteries (not included) to power the camera for up to 2.5 hours and is securely mounted below the camera yet easy to remove and charge. Mission Control Nauticam engineers are driven to produce housings that are intuitive and easy to use. Essential to the capture process is effortless access to the camera's essential controls. On the housing's left side are large cinema-style focus and zoom gear controls. The NA-BMPCC6K features Nauticam's refined ergonomic handles with stainless steel stiffening brackets and changeable accessory mounting points. From the left handle a thumb lever accesses the Playback function. From the right handle the record lever and a dual-action lever for ISO and shutter speed can be reached. A second thumb lever towards the rear activates the White Balance and Focus controls. Accessory Support The NA-BMPCC6K features both an M28 and M16 bulkheads for HDMI accessories such as the Nauticam NA Ninja V or NA-502B monitor housings. The housing is also compatible with tripod mounting-ball set in addition to 1/4-20 UNC connection on the top and bottom of the housing. HDMI 2.0 System NA25078 M28A1R225-M28A1R170 HDMI 2.0 Cable (for NA-BMPCCII/S1R to use with Ninja V housing) NA17922 Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player HDMI 1.4 Cable System NA25083 HDMI (D-A) Cable in 240mm Length for NA-BMPCCII/S1R (for internal connection from HDMI bulkhead to camera) NA25080 M28-M16 Step Down Adaptor NA25033 standard HDMI bulkhead with M16 thread (25033 is included in NA-058/502H/FHD5/502B-H monitor housing).

The evolution of the mirrorless interchangeable-lens camera has been happening at a fever pitch over the last few years with Panasonic leading the field of introducing more video-driven improvements.  With the LUMIX DC-S1H, Panasonic is taking its full-frame mirrorless S1 platform and giving it supercharged cinema-video specs.  The S1H is the first full-frame mirrorless camera to offer 6K (3:2) 24p internal recording with 14+ stops of dynamic range.  The Nauticam NA-S1H, with its M28 bulkhead supporting HDMI 2.0 output, can be combined with the Atomos Ninja V and Shogun Inferno external monitors/recorders to offer even more recording and monitoring Options. THE PANASONIC LUMIX DC-S1H CAMERA The Panasonic S1 brought many of the features that made the GH series of micro-four-thirds cameras popular with underwater image-makers to a full-frame sensor.  With the S1H, Panasonic has taken some of it's VariCam cinema-tech and added it to already strong video capabilities of the S1 platform.  The most notable is the ability to record 6K in a 3:2 aspect ratio at 24p (or 5.9K, 30p at 16:9) at a reported 14+ stops of dynamic range.  If 60p is important, the S1H will also capture C4K/UHD4K at 60p in 4:2:2 10-bit internally.   THE NAUTICAM NA-S1H UNDERWATER HOUSING As the S1H is an evolution of the mirrorless camera, the NA-S1H is the progression of Nauticam's innovative approach to housing design and construction.  As the capabilities of the cameras housed within increases, so must the housing itself.  The NA-S1H is a perfect compliment to the S1H camera and is designed to take full advantage of the S1H's advanced video capabilities.   EF AND L LENS SUPPORT Sigma's MC-21 EF to L adapter allows for the use of Sigma EF-mount lenses to be used with the S1H camera. The NA-S1H Housing is designed to not only accommodate the adapter but to allow for the use of the existing focus and zoom gears for Canon EF-mount Sigma lenses for the N120 Canon System along with the existing Canon N120 extension ring and port combinations for those lenses.  As native L-mount lenses become available, those best suited to underwater use will be added to the system. MISSION CONTROL The NA-S1H follows Nauticam's Mission Control design philosophy that emphasizes placing the control where it is needed most, regardless of where it may be on the camera itself.  This has led to housings where the majority of essential controls can be easily reached from the ergonomic handles.  The use of thumb-levers allows for the manipulation of many controls without having to remove your hand from the handle which leads to more time spent focusing on the shot and less time looking for a control. The NA-S1H features dual thumb levers on both the right and left rear of the housing.  The left side activates Playback and DISP buttons while the right controls AF-ON and REC.  An inner lever on each side adds additional functionality with ISO for the front right and LVF on the left rear.  A multi-position switch on the rear of the housing accesses C/M/AF and is located next to the multi-directional pad. HDMI 2.0 The NA-S1H features the large-bore M28 bulkhead that supports HDMI 2.0 video output connections to external recorders/monitors such as the Atomos Ninja V and Shogun Inferno with the optional Nauticam HDMI 2.0 cables and monitor housings.  An HDMI 1.4 option is also available for those monitor housings that do not feature the M28 bulkhead.

With the ability to accommodate both Panasonic LUMIX S1 and Panasonic S1R cameras, the Nauticam NA-S1R housing offers tremendous versatility to the underwater photographer. Nauticam's drive for innovation and focus on real-world usability is clearly reflected in the NA-S1R's features.   Although the two cameras may have different strengths, the NA-S1R is designed and built to give both video and photography enthusiasts easy access to all the controls and functions, exactly where they need them. Operation Nauticam engineers are obsessed with ease of use, and the Mission Control philosophy means they place essential controls where they are needed, regardless of where they are on the camera body. By placing the controls as close as possible to the handles and within easy and natural reach, users can concentrate on the composition and timing of their shot while adjusting exposure or focus without taking their eye off the viewfinder or screen.   The NA-S1R has a double thumb lever on the left rear of the body that accesses DISP and playback, while a double thumb lever on the left front activates the customisable Fn1 and Fn2 buttons.  A rear thumb lever on the right side is for AF-On and REC.  A lever on the right side of the NA-S1R allows the focus mode to be switched between C/S/MF and a multi-directional pad that provides the ability to navigate through the menu or move the focus point. Sigma EF lens support The MC-21 EF to L adapter from Sigma allows the use of Sigma EF lenses for use with the S1 and S1R cameras. The NA-S1R underwater housing is designed to not only accommodate the adapter, but also to allow the use of the existing focus and zoom wheels for Sigma lenses with Canon mounts, as well as the existing extension ring and port combinations for these lenses.     Flash release Optical flash triggering with automatic exposure (TTL) is supported by the Panasonic DMW-FL70 clip-on flash (sold separately). For quick manual flash triggering, the NA-S1R is compatible with the Nauticam Mini Flash Trigger (NA26309), which uses small LED units to trigger external flashes via Nauticam Universal Fibre Optic (26216).  A TTL flash on/off switch on the top of the housing allows the DMW-FL70 flash unit to be activated or deactivated in water.  HDMI 2.0 output To take full advantage of the S1's video capabilities, the NA-S1R features the large-size M28 connector for HDMI 2.0 connections, such as those used on the Atomos Ninja V in conjunction with the Nauticam Atomos Ninja V housing (HDMI 2.0). Vacuum testing and leak detection system The Nauticam vacuum testing and leak detection system is supplied with NA-S1R as standard. Combined with an additional vacuum valve (NA25625 or NA25624), this monitoring system provides constant information about the watertight and submersible condition of the enclosure. A simple colour-coded LED lighting system indicates to the user that the vacuum is tight or that the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water ingress.  The Nauticam system is temperature compensated and eliminates false alarms caused by a change in outside temperature or a camera heating up during an action-packed dive. Recommended 4K recorder/monitor: NA17922 Nauticam Atomos Ninja V Underwater Housing (HDMI 2.0) for Atomos Ninja V 5 4Kp60 4:4:2 10-bit Recorder/Monitor NA25078 HDMI 2.0 Cable M28A1R225-M28A1R170 for NA17922 Ninja V Enclosure