POP Underwater

A wide range of underwater equipment, such as clamps, buoyancy arms, lanyards, O-rings and carrying handles from POP Underwater.

on stock

Standard-Clamp (black)

Standard clamp for mounting two arms, base adapters and flash adapters.

€27.50*

on stock

Double Grip Tray Arm Kit (adjustable)

Lightweight dual tray with handles set This handle rail made of sturdy aluminium is adjustable in width (218 mm to 265 mm). Due to its design, both trigger extensions and carrying straps with shackles can be securely attached. Example setup with FRX100V housing and trigger extension We recommend this combination for underwater housings from Fantasea for mirrorless cameras and larger compact housings, among others. Particularly suitable for operation with gloves.

€135.00*

on stock

Spiral cable with stainless steel snap hook (black)

With this spiral cable you can securely fasten your equipment to the D-rings of your diving waistcoat. Note: Not suitable for cave photography as the connection cannot be cut with a knife or cutter.

€17.90*

on stock

Spiral cable with stainless steel snap hook (red)

With this spiral cable you can securely fasten your equipment to the D-rings of your diving waistcoat. Note: Not suitable for cave photography as the connection cannot be cut with a knife or cutter.

€17.90*

on stock

Double ball arm (10 cm)

Double ball head arm, 10 cm length. The ball head diameter is 25 mm (1 inch). All products are made from CNC machined aluminium and are then anodised black to be seawater resistant. The arm length to choose depends on the type of photography you want to do. If you only do macro, then you want a small, compact arm. If you're only doing wide angle, then you want your flashes away from the camera to reduce the floaters you get when the flashes light up the water in front of your subject. If you want to do both types of photography, then there will be a need to implement the length that will allow for wide angle photography and not get in the way of macro photography.

€25.00*

on stock

Lanyard with shackles (Red)

This 34 cm long carrying strap can be securely fastened with the supplied shackles and allows the housing to be easily lifted.

€19.95*

on stock

Float arm 20 x 5 cm (150 g buoyancy)

Large buoyancy double ball arm with 1-inch ball head connection Diameter 5 cm Length 20 cm Buoyancy 150 g Made from CNC machined aluminium and then anodised black sea water resistant.

€55.00*

on stock

Spiral cable with stainless steel snap hook (black)

With this spiral cable you can securely fasten your equipment to the D-rings of your diving waistcoat. Note: Not suitable for cave photography as the connection cannot be cut with a knife or cutter.

€17.90*

on stock

Spiral cable with stainless steel snap hook (blue)

With this spiral cable you can securely fasten your equipment to the D-rings of your diving waistcoat. Note: Not suitable for cave photography as the connection cannot be cut with a knife or cutter.

€17.90*

on stock

Double ball arm (10 cm)

Ball head arm with YS connection, 10 cm length. The ball head diameter is 25 mm (1 inch). All products are made from CNC machined aluminium and are then anodised black to be seawater resistant. The arm length to choose depends on the type of photography you want to do. If you only do macro, then you want a small, compact arm. If you're only doing wide angle, then you want your flashes away from the camera to reduce the floaters you get when the flashes light up the water in front of your subject. If you want to do both types of photography, then there will be a need to implement the length that will allow for wide angle photography and not get in the way of macro photography.

€25.00*

on stock

O-rings for 1 inch ball head (red)

Coloured O-rings for 1-inch ball head in red.

€9.90*

on stock

Float arm 20 x 7 cm (340 g buoyancy)

Large buoyancy double ball arm with 1 inch ball head connection. Diameter 7 cm Length 20 cm Buoyancy 340 g Made from CNC machined aluminium and then anodised black sea water resistant.

€75.00*

on stock

Universal Shutter Trigger (black)

Versatile shutter release extension by POP-UW With many underwater housings it is difficult to operate the shutter once the housing is mounted on a grip rail. This Universal Shutter Extension provides a remedy. With a marine stainless steel mounting plate, it attaches to a handle and allows you to operate the shutter release with your index finger - without the hassle of reaching around. The hand can remain on the handle. This way you also avoid unnecessary shaking.

€79.00*

on stock

Holder and Protection System

With this carrying handle made of solid aluminum, you can transport your camera system safely on land and under water. In addition to additional protection, it also offers a variety of attachment points for additional lamps, flashes, action cams and other accessories.

€49.00*

on stock

Lanyard with shackles (Black While)

This 34 cm long carrying strap can be securely fastened with the supplied shackles and allows the housing to be easily lifted.

€19.95*

on stock

Spiral cable with snap hook made of stainless steel (orange)

With this spiral cable you can securely fasten your equipment to the D-rings of your diving waistcoat. Note: Not suitable for cave photography as the connection cannot be cut with a knife or cutter.

€17.90*

on stock

Double ball arm (25 cm)

Double ball head arm, 25 cm length. The ball head diameter is 25 mm (1 inch). All products are made from CNC machined aluminium and are then anodised black to be seawater resistant. The arm length to choose depends on the type of photography you want to do. If you only do macro, then you want a small, compact arm. If you're only doing wide angle, then you want your flashes away from the camera to reduce the floaters you get when the flashes light up the water in front of your subject. If you want to do both types of photography, then there will be a need to implement the length that will allow for wide angle photography and not get in the way of macro photography.

€40.00*

on stock

Spiral cable with stainless steel snap hook (Pink)

With this spiral cable you can securely fasten your equipment to the D-rings of your diving waistcoat. Note: Not suitable for cave photography as the connection cannot be cut with a knife or cutter.

€17.90*

on stock

Float arm 50 x 250 mm (210 g buoyancy)

Large buoyancy double ball arm with 1-inch ball head connection Diameter 5 cm Length 25 cm Buoyancy 210 g Made from CNC machined aluminium and then anodised black sea water resistant.

€65.00*

on stock

Lanyard with shackles (Pink)

This 34 cm long carrying strap can be securely fastened with the supplied shackles and allows the housing to be easily lifted.

€19.95*

on stock

Spiral cable with stainless steel snap hook (cyan)

With this spiral cable you can securely fasten your equipment to the D-rings of your diving waistcoat. Note: Not suitable for cave photography as the connection cannot be cut with a knife or cutter.

€17.90*

on stock

Standard Clamp Silver

Standard clamp for mounting two arms, base adapters and flash adapters.

€27.50*

on stock

Triple clamp

The triple clamp replaces a normal clamp in an arm set so that another element with a ball can be added.

€35.00*

on stock

Double Grip Tray Arm Kit

Lightweight double handle set This handle rail made of sturdy aluminum is variable in width (195 mm to 225 mm). Due to its design carrying straps with shackles can be securely attached. We recommend this combination for underwater housings for the TG5 and TG6 from Olympus, among others.

€80.00*