Optical Cable adaptor for built-in Flash
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
on stock
Product number:
AS0243
Available stock:
1
Allows to use one or two external strobes with optic fiber. Original small caps can be used to close one bush when only one strobe is used. Usable with all Isotta Compact housings except Olympus Tough..
| Body Material: | Polyethylene |
|---|
Technical data
bruchfestes Kunststoff
Scope of delivery
- 1 Isotta Optischer Kabeladapter für eingebauten Blitz
- 2 Fixierschrauben
- 2 Abdeckkappen
- 2 Befestigungsschrauben für fiberoptisches Kabel
Login
There aren't any asked questions yet.
Canon PowerShot G7X Mark II Underwater Housinng by Isotta
€1,105.00*
The housing for the Canon Powershot G7X Mark II makes it possible to exploit the full potential of the camera and capture amazing images underwater.
Through techniques and innovations based on years of experience, an easy-to-use, highly professional product has been created. The Isotta underwater housing for the Canon Powershot G7X Mark II enables perfect handling in the water. Easy access to all major camera controls with clearly labeled, laser-engraved, durable buttons. A simple and quick release camera mounting plate allows for camera positioning; the rear flap has a large window for a good view of the camera and is fully separated from the front housing to facilitate camera mounting.
Open and close with one hand
It is very easy to open and close the Canon Powershot G7X Mark II without any effort on the part of the user thanks to the side screw slots and the lower centering pins; the camera is easily placed in the case on a sliding carriage that keeps the camera sturdily in place. A lever locks the compartment securely inside the case. The case stands very stable due to the sturdy and wide rubber grippers on the underside.
Port and attachment lenses
The front port is equipped with high-quality materials to ensure perfect image quality. Thanks to markers and a bayonet mount on the Canon Powershot G7X Mark II underwater housing, a removable flat port is attached. An M67 thread allows for the use of additional attachment lenses for wide-angle and macro photography.
A short port is available for additional extreme wide-angle lenses.
Light
The Canon Powershot G7X Mark II's internal flash can be used when an external diffuser is attached to the porthole. For better performance with wide-angle lenses, one or two external flashes can be connected üvia fiber optics with the included adapter.
Construction and Safety
Only the best materials are used to manufacture our housings, such as anodized aluminum that is anti-corodal and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. So small and so rich in technology! Two high-precision and high-quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user-replaceable battery. The rated depth is 100 meters. A Öse on the bottom allows the underwater housing for the Canon Powershot G7X Mark II to be secured with a cable/harness. Various accessories can be mounted using a top sliding tray and double threaded M6 holes, and a 1/4-inch tripod mount on the bottom.
Operation
ON/OFF of the Canon PowerShot G7X Mark II
Internal camera flash öopen/close
Ergonomic camera focus and ejector for easy gloved operation
Shutter speed priority
Lens aperture
Special features
All the major main controls of the Canon Powershot G7X Mark II
M16 hole for vacuum system or external monitor
Simple one-handed handle for opening/closing
Humidity sensor
Double, high-precision and high-quality O-ring seals.
Sony RX100 Mark III Underwater Housing by Isotta
€1,105.00*
The Isotta underwater housing for the Sony Cyber-shot RX100 Mark III makes it possible to use the camera's full potential and capture amazing images and videos underwater.
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. The housing for Sony Cyber-shot RX100 Mark III perfect handling through adjustable strips. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons. Easy and quick release camera mounting plate allows camera positioning; back door has a large window for a good view of the camera and is completely separated from the front housing to facilitate camera mounting.
Opening and closing with only one hand
It is very easy to open and close the Sony Cyber-shot RX100 Mark III without any effort on the part of the user thanks to the side screw slots and the lower centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera securely in place. A lever locks the compartment securely inside the housing. The housing stands very stable due to the non-slip and wide rubber feet on the underside.
Port for attachment lenses
The front portholes are equipped with high-quality materials to ensure perfect image quality. A detachable flat port is attached to the Sony Cyber-shot RX100 Mark III body thanks to markers and bayonet mount. An M67 thread allows the use of additional wide-angle and macro attachment lenses.
Light
The internal flash of the Sony Cyber-shot RX100 Mark III can be used when an external diffuser is attached to the porthole. For better performance with wide-angle lenses, one or two external flashes can be connected via fibre optics using the supplied adapter.
Construction and safety
Only the best materials are used in the manufacture of Isotta underwater housings, such as anodised aluminium, which is anti-corodal and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. So small and so rich in technology! Two high-precision and high-quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user-replaceable battery. The working depth is 100 metres. A hole on the bottom allows the Sony Cyber-shot RX100 Mark V / RX100 Mark VA case to be secured with a cable/strap. Various accessories can be mounted using a top sliding tray and double threaded holes M6 and a 1/4W on the bottom.
Operation
ON/OFF of the Sony Cyber-shot RX100 Mark III
Dedicated camera flash for open/close
Ergonomic camera focus and shutter release for easy gloved operation
Shutter speed priority
Aperture
Special features
All Sony Cyber-shot RX100 Mark III Main Controls
M16x1 through-hole for vacuum system or external monitor
Simple one-hand opening/closing
Humidity sensor
Double, high-precision and high-quality O-ring seals
Optical D Cable SS Type L (short)
€49.00*
Fibre optic kit for underwater housings that require fibre optic cables without plugs (e.g. Isotta or Fantasea) or also for connecting a second flash with a dual plug.
Fibre optic cables are available in four different lengths: optical D cable SS type L (free length approx. 24 cm), optical D cable type L (free length approx. 43 cm), optical D cable L type L (free length approx. 68 cm) and optical D cable LL type L (free length approx. 110 cm).
Inon's optical cable products use multi-conductor optical fibre cables made of more than 200 individual fibres with the tremendous feature of minimum bending curvature of 2 mm to ensure high durability and rigid reliability when triggering an external flash together in heavy underwater environments.
.
Optical D Cable L Type L (long)
€75.00*
Fiber optics kit for a housing which directly accepts bear end of Optical D Cable Type L and also usable to connect second strobe. Four different length products are available; Optical D Cable SS Type L (free length approx. 24cm/9in), Optical D Cable Type L (free length approx. 43cm/17in), Optical D Cable L Type L (free length approx. 68cm/27in) and Optical D Cable LL Type L (free length approx. 110cm/43in).
INON optical cable products use multicore optical fiber cable made from more than 200 single fibers with enormous characteristic of minimum bending curvature 2mm to provide super durability and rigid reliability to trigger an external strobe in severe underwater together.
Optical D Cable Type L (60cm) excluding connector
€76.00*
Fibre optic cable for underwater housings that require fibre optic cables without plugs (e.g. Isotta or Fantasea) or also for connecting a second flash with a dual plug.
Optical fibre optic cables are available in four different lengths: optical D-cable SS type L (free length approx. 24 cm), optical D-cable type L (free length approx. 43 cm), optical D-cable L type L (free length approx. 68 cm) and optical D-cable LL type L (free length approx. 110 cm).
Inon's optical cable products use multi-core optical fibre cables made of more than 200 individual fibres with the enormous feature of a minimum bending curvature of 2 mm to ensure high durability and rigid reliability when jointly triggering an external flash in heavy underwater areas.
on stock
Optical D Cable LL (extra long)
€82.00*
Fiber optics kit for a housing which directly accepts bear end of Optical D Cable Type L and also usable to connect second strobe.
Four different length products are available; Optical D Cable SS Type L (free length approx. 24cm/9in), Optical D Cable Type L (free length approx. 43cm/17in), Optical D Cable L Type L (free length approx. 68cm/27in) and Optical D Cable LL Type L (free length approx. 110cm/43in).
INON optical cable products use multicore optical fiber cable made from more than 200 single fibers with enormous characteristic of minimum bending curvature 2mm to provide super durability and rigid reliability to trigger an external strobe in severe underwater together.
Canon G5 X Mark II Underwater Housing by Isotta
€1,140.00*
The underwater housing for Canon Powershot G5XII allows to capitalize on the camera full potential and to capture amazing pictures underwater.
The Isotta Underwater Housing for Canon Powershot G5XII
An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for Canon Powershot G5X perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting.
ONE HAND OPEN/CLOSE
It's very easy to open and close Canon Powershot G5XII, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom.
PORT, CLOSE-UP AND WIDE-ANGLE LENSES
Front portholes are built with high quality standards of materials to ensure a perfect image quality. A removable flat port is fitted thanks to markers and a bayonet connection to Canon Powershot G5XII housing.
LIGHTING
Canon Powershot G5XII own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Canon Powershot G5XII with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom.
Controls
ON/OFF of Canon PowerShot G5X Mark II
Own camera strobe open/close
Ergonomic camera focusing and shutter button for an easy use with gloves
Shutter speed priority
Lens aperture
Product Highlights
All Canon Powershot G5aX Mrk II key main controls
M16x1 hole for vacuum system or external monitor
Easy one hand housing open/close
Moisture sensor
Double high precision and quality O-Ring seals