Easy operation.
Important controls such as ISO, AF-ON and Start-Stop can be activated and deactivated more easily with a new lever design.
The multi-controller is located on the right side of the rear gear.
Compatible with the VF180 1.2x and VF45 1.2x viewfinders
Mounting the VF180 or VF45 prism viewfinder on the housing increases magnification by 1.2x and the entire field of view is visible at the same time. Recommended for users who are committed to strict image composition and focus.
Luminescent decals
Important controls, including levers and buttons, glow in the dark.
Diopter adjustment dial
The camera's diopter adjustment knob can be operated from the walker. This feature is useful when two or more people (with different eyesight) are using the walker.
The main dials are equipped with a damper (spring)
The main dial, the speed dial, the diopter adjustment dial and the Live View film lever have a spring-loaded damper for safe operation. (The camera controls do not slip through the dampers).
Equipped with a movable focus/zoom wheel
When the focus/zoom wheel is pulled out, the gear inside the housing moves outwards so that large-diameter lenses can be mounted easily.
Other functions
- The housing has three accessory ports. One is designed for the N-flash connector and the other two for the HDMI output and the leakage monitor (vacuum system).
- Equipped with two fibre optic cable jacks.
- The port interlock can be activated from the outside of the enclosure.
- Equipped with two sacrificial zinc diodes to prevent electrolysis damage.
- 3-stage shutter sensitivity adjustment.
Additional information
* The housing is not equipped with a flash connector when shipped from the factory. Use (a) fibre optic cable(s) when connecting external flashes. An optional 2-pin sync cable connector (SEA50122) is required if you wish to use a conventional hard-wired sync cable.
>
Body Material: | aluminum |
---|---|
Camera System: | DSLR |
Camera manufacturer: | CANON |
Strobe connector: | optical Sea&Sea |
- Gehäusematerial: korrosionsbeständige Aluminiumlegierung
- Griffmaterial: korrosionsbeständige Aluminiumdruckgusslegierung
- Nenntiefe: 100m
- Abmessungen (BxHxT): 340 x 194 x 140 mm
- Gewicht: Ca. 3.000g (nur Gehäuse)
- 1 Unterwassergehäuse Sea & Sea MDX-80D für Canon 80D
- O-Ring-Fett
- O-Ring-Entferner
- Inbusschlüssel (6mm / zur Griffdemontage)
- Inbusschlüssel (3mm / für Verbindungsschraube)
- O-Ring Pflegeanleitung
- Bedienungsanleitung
Login