+49 2501 9292419
shop@panoceanphoto.com
Shop in Münster
Go to homepage
Wishlist
Shopping cart €0.00*

Sony alpha 1 Underwater Housing by Sea&Sea

Sony alpha 1 Underwater Housing by Sea&Sea
Sony alpha 1 Underwater Housing by Sea&Sea
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Sony alpha 1 Underwater Housing by Sea&Sea
Sony alpha 1 Underwater Housing by Sea&Sea

€5,295.00*

Prices incl. VAT plus shipping costs

Free shipping

Delivery time: 12 days*

Product number: SEA07145
HAN: MDX-α7IV U

Universal compatibility(*) with Sony Alpha series.

The future-oriented mirrorless SLR compatible housing is now fully loaded.

(*) For other Sony Alpha cameras customize kits a needed. Please contact us.

Enhancement Customization Kit

The shooting mode lever cannot be used. This can be handled by using an optional kit. S&Q cannot be used.

Universal design for the future The back panel is designed to be large.

The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight.

Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement. 

Full range of standard equipment

Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place.

Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation. 

Newly designed fiber-optic cable cover

Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover. 

Leak Alarm Unit as standard equipment

The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment.

It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included.

Strobe Synchro System

The fiber-optic cable connection enables manual firing of the YS strobe.

Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control.

YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions.

Focus Point Movement Settings

To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial.

Other Features

  • The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
  • The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
  • Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
  • All controls have luminescence stickers which glow in dark environment.
  • Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used.
  • ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting.
  • Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
  • Tripod screw mount is located on the centre underside of the housing.
  • Equipped with under guard to protect from scrach.
Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Sony
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: DX
Weiterlesen
Technical data

  • Body: corrosion-resistant aluminum alloy (machined)

  • Grip: corrosion-resistant die-cast aluminum alloy

  • Depth Rating. 100m / 330ft

  • Dimensions (WxHxD): 330 x 169 x 137 mm / 12.9 x 6.6 x 5.4 inches

  • Weight: approx. 2,900g / 102.3oz (Housing only)


Scope of delivery

  • Sony alpha 1 Underwater Housing by Sea&Sea

  • a1 Customize Kit for MDX-aU

  • Manual optical flash trigger

  • Leak alarm unit

  • Leak alarm unit manual pump

  • CR2032 lithium battery (for leak alarm unit)

  • Silicone grease

  • O-ring remover

  • Hex wrench (6mm / for grip dismounting), Hex wrench (4mm / for Lanyard bolt), Hex wrench (2mm)

  • O-ring maintenance manual

  • Instruction manual (this manual)



Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing often does not include a port or an external viewfinder. These can be purchased as accessory items. If you have any questions about the configuration of your system, do not hesitate to contact us.


0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Sync Cord 2-pin Connector
Sync Cord 2-pin Connector
User replaceable 2-pin strobe connector and sync connecter set. The connector set can be fixed after removing cap for accessory port. The connector set is required to connect the YS series strobes via sync cord to SEA&SEA housings for digital SLR cameras which are equipped with accessory port as standard.

€139.95*
TTL-Converter for Sony in Sea&Sea housings MDX-aU, A7II, A7III, A7IV, A1.
TTL-Converter for Sony in Sea&Sea housings MDX-aU, A7II, A7III, A7IV, A1.
TTL-Converter for SONY for SEA&SEA MDX-αU, MDX-A7II, A7III, A7IV, A1 and other underwater housings. Compatible underwater strobes: Inon Z-330 / Z-240 / S-2000, Sea&Sea YS-D1 / YS-D3 Mark II / YS-250, Ikelite DS-230 / DS-162 / DS161 /, DS160 / DS-125, Subtronic Pro-270 / Pro-160, Retra Pro X (including HSS). Onboard outputs: 2 optical + 2 electric. Powerful LEDs are included. Optional electric socket adapters for Sea&Sea Nikonos bulkhead rear side (for electric sync) are not included with the standard kit (Sea&Sea original parts, should be purchased separately). Compatible Sea&Sea underwater housings: MDX-a7II,a7III, a7IV, a1 and others (all models of housings that provide for the installation of the original Sea&Sea #50139 TTL Converter).

€499.00*
Optical YS Converter/S2 for MDX housing
Optical YS Converter/S2 for MDX housing
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s) (*). TTL and manual modes can be switched by pushing the mode switch on the housing. * SEA&SEA's Fiber-Optic Cable II must be used with an Optical YS Converter.

€449.00*

Similar products

on stock
Sony Alpha 1 Underwater Housing by Nauticam
Sony Alpha 1 Underwater Housing by Nauticam
Aimed squarely at professional image makers, the Sony Alpha 1 provides a 50MP sensor capable of 30fps burst shooting and 8K video.  It features Sony's latest autofocus system, an incredible 9.44M-dot EVF and a 1/400 sec flash sync speed with the mechanical shutter. Whether you are interested in still photos or video, this camera can do just about anything you need it to.   SONY ALPHA 1 CAMERA The Sony a1 is the company's flagship full-frame interchangeable lens camera.  Designed around the new 50.1MP Exmor RS BSI CMOS sensor and the BIONZ XR processor, the a1 is truly a camera which can do it all.  It's 759 point Fast Hybrid Autofocus system offers advanced subject tracking and real-time eye autofocus on both humans and animals.  The optimized processing within the a1 allows it to achieve 30fps continuous shooting at full resolution along with 8K 30p and 4K 120p 10-bit video recording.    8K 30p recording is possible using the full width of the sensor while 4K 120p uses a 10% crop.  Through a Super 35 crop, oversampled 4K recording is also achievable, via an 5.8K capture area.  For shooters who demand more post production flexibility, 4.3K raw 16-bit recording is possible to an external recorder using the camera's full size HDMI A port.   The a1 has also received major upgrades compared to its predecessors, including a 9.44M-dot OLED EVF with a 240fps refresh rate.  The newly designed shutter allows for flash sync speeds up to 1/400 sec and the body includes dual card slots supporting either CFexpress Type A or SD UHS-II memory cards.   SONY ALPHA A1 KEY SPECIFICATIONS 50.1MP Exmor RS BSI CMOS full-frame sensor 759 point Fast Hybrid AF with tracking 30 fps burst shooting with electronic shutter 9.44M dot OLED viewfinder with 240fps refresh rate 8K 30p and 4K 120p video in 10-bit 4.3K 16-bit Raw video output Dual UHS-II / CFexpress Type A card slots THE NAUTICAM NA-a1 UNDERWATER HOUSING Nauticam has supported the Sony Alpha full-frame line since the original a7 with professional grade aluminum housings that offer intuitive access to all the controls and functions of the cameras. As the cameras have evolved, so have the Nauticam housings. The NA-a1 underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-a1 continues this tradition. Integrated DSLR-housing styled handles with ergonomic rubberized grips and stainless steel stiffening brackets add stability and accessory mounting points. The NA-a1 also features dual rear thumb-levers that are easily reached from the handle that access three of the most-used controls on the rear of the camera. The right lever actuates the AF-ON and RECORD buttons while the left lever is mapped to the PLAY button. Atop the housing on the left side are controls in the form of a MODE dial and FOCUS mode lever. The C1, C2 buttons as well as the EV compensation dial also have direct access from the top of the housing. The C3, which is typically assigned to control switching between the EVF and the LCD screen is easily reachable on the rear of the housing from the left handle. ACCESSORY PORTS The NA-a1 has both an M24 port at the front of the housing for both HDMI 1.4 and HDMI 2.0 connectivity (see sidebar for recommendations) as well as an M14 at the rear for the optional Vacuum Valve (25624). The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system. This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Nauticam's wide range of ports and in-house corrective optics are the perfect compliment to the NA-a1's inherent flexibility. Built around the N100 Port System, the NA-a1 supports a wide variety of Sony FE mount lenses, as well as EF mount lenses via adapters. In addition, there are several options available to use the groundbreaking WACP and WACP-2 wide-angle corrective lenses as well as the more compact and in-water removable WWL-1B. For example, With the Sony SEL1635GM FE 16-35mm F2.8 GM, the WACP 2 brings the original 105º field-of-view to an impressive 128º with sharper corners, an ~0" minimum focus distance and a more natural looking image than would be provided by a standard glass dome port. FLASH TRIGGERING Both fiber-optic and electrical strobe triggering options are available. The Nauticam Universal Fiber Optical cables attach to the built-in bulkheads atop the housing and feature modular connections for both Sea&Sea-style bushings and INON threaded connections. Triggering is achieved using the optional Nauticam Mini Flash Trigger for Sony (26302) which uses LEDs powered by an on-board coin-cell battery to generate a manual signal that is transmitter via the optical cables to compatible strobes.

€4,185.00*
Sony Alpha 1 Underwater housing by Isotta
Sony Alpha 1 Underwater housing by Isotta
The underwater housing for the Sony Alpha 1 allows you to exploit the camera's full potential and capture amazing images underwater. Details of the Isotta underwater housing for Sony Alpha 1 Technology and Innovation gained from years of experience has resulted in an easy-to-use, highly professional product. Easy access to all the camera's buttons/main controls, even when wearing gloves, thanks to clearly labelled, laser-etched buttons with a long service life. The rear panel has a large viewing window for a good overview of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The housing is very stable thanks to robust and wide rubber feet on the underside. One-handed open/close Opening and closing the Sony Alpha 1 is very easy and effortless thanks to the upper screw bolt and the lower centred pins; the camera is simply placed in the housing on a sliding tray that holds the camera stably in Position. Ports and extensions A range of ports and extension rings are available in the designated area. The detachable port is attached to the body of the Sony Alpha 1 Underwater housing by Isotta thanks to markings and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light control Two fibre optic connections allow the use of an external strobe via the manual trigger (optional). The Isotta undewater housing for Sony alpha 1has one M28 and M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is anti-corodal and thermo-coated, and stainless steel. A durable product that requires easy and simple maintenance by the user. Two high precision and high quality O-ring seals protect and ensure a perfect and secure seal of all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be attached directly to the handles or via an upper M8 threaded hole, via the Isotta top handle or via the M6 threaded holes on the bottom. Controls On and off lever of the della Sony Alpha 1; Ergonomic camera focusing and shutter lever, easy to use with gloves; Lens release lever; Aperture knob; C1 lever; C2 button; Mode knob; Focus selector knob; Zoom knob; Port safety lever; REC lever; AF-ON lever; Multi-shot selector knob; Shutter speed knob; Exposure knob; Lock/unlock exposure dial button; Rear control panel of the camera; Technical data Red color anodized aluminum body; Ergonomic side handles, adjustable (via optional accessory); Two fiber optic connections standard;* Two M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors; Back housing completely detachable from the front housing; Tray with lock for the easy insertion of the camera; Single-hand closing knob for the back of the housing; Aluminum buttons and dials with engraved symbols identical to camera controls; Wide back display viewfinder glass; Double O-Ring seals on all buttons and removable parts; Moisture sensor with LED indicator (replaceable battery); Removable port 120 mm bayonet; Ports security latch to prevent accidental opening; Wide, rubber covered feet for solid footing on boat floors or sea floor; M8 hole located on upper side of the housing for various accessories such as focus lights; Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible; Depth rated to 100 metres;

€3,490.00*