INON | Straight Viewfinder Unit II for X-2 (narrow)

Body Material:	aluminum

Nikon D780 Underwater Housing by Isotta

The housing for Nikon D780 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Nikon D780 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon D780 is closed with Isotta?s single handed one-turn knob. It?s the only single latch closing mechanism in the DSLR housing market. It?s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon D780. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. TTL CONVERTER FLASH (optional) The housing for Nikon D780 features TTL Converter Electronics for Automatic flash control. It also offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 hole positioned on the upper side of the housing and double threaded M6 holes located on housing bottom side. Highlights: Ergonomic side handles, adjustable (via optional accessory) TTL converter electronics for automatic flash control not icluded Two fiber optic connectors Two electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera; Single-hand closing knob for back housing Two M16 holes for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder and top window for display Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripod External viewfinders can be mounted, INON X-2 compatible

Sony Alpha 7SII Underwater Housing by Isotta

The underwater housing for the Sony Alpha 7S II allows you to use the camera to its full potential and capture amazing images underwater. Details of the Isotta underwater housing for Sony Alpha 7S II. Techniques and innovations gained from years of experience have resulted in an easy-to-use, highly professional product. Easy access to all camera buttons/main controls, even when wearing gloves, through clearly labelled, laser-etched buttons with long life.. The back cover has a large viewing window for a good view of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The back cover has a large viewing window for a good view of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The back cover has a large viewing window for a good view of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The housing is very stable due to the robust and wide rubber grippers on the underside. One-handed opening/closing Opening and closing the Sony Alpha 7S II is very easy and effortless thanks to the upper screw bolt and lower centred pins; the camera is simply placed in the case on a sliding tray that holds the camera stably in position. The Sony Alpha 7S II is very easy to open and close thanks to the upper screw bolt and lower centred pins; the camera is simply placed in the case on a sliding tray that holds the camera stably in position. Ports and extensions A number of ports and extension rings are available in the designated area. The detachable port is attached to the body of the Sony Alpha 7S III thanks to markings and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light control Two fibre optic ports allow the use of an external strobe via the manual output (optional). The housing has two M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our housings, such as anodised aluminium, which is anti-corodal and thermo-coated, and stainless steel. A durable product that requires easy and simple maintenance by the user. Two high precision and high quality O-ring seals protect and ensure a perfect and secure seal of all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be attached directly to the handles or via an upper M8 threaded hole, via the Isotta top handle or via the M6 threaded holes on the underside. Controls ON/OFF of the Sony Alpha 7S II. Ergonomic camera focus and release buttons for easy operation with gloves. Lens release Rear control panel Upper control panel All controls are available on the handset. The technical specifications Ergonomic side handles, adjustable (via optional accessories) Two fibre optic connectors Two M16 holes and one M24 hole for mounting accessories, e.g. sync cable, vacuum valves, monitors Rear housing completely detachable from the front housing. Shelf with latch for easy camera insertion. One-handed locking button for the back of the case. Aluminium buttons and dials with engraved symbols identical to the camera controls. Large viewfinder glass for panoramic view. Double O-ring seals on all buttons and removable parts. Humidity sensor with LED indicator (replaceable battery) Removable connector -120 mm bayonet Security locking of the ports against accidental &opening. Wide, rubber-coated feet for firm footing on boat or sea floor. M8 hole on the top of the housing for various accessories such as focus lights. Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods. External viewfinders can be mounted, INON X-2 compatible.

Nikon D500 Underwater Housing by Isotta

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D500 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible. Open and close with one hand The housing for the Nikon D500 is locked with Isotta's one-handed, one-turn knob. It is the only single locking mechanism on the DSLR housing market. It's quick, easy and secure thanks to its double steel pins on the underside of the housing. Ports and extensions A range of connectors and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D500 thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance. TTL converter included The Nikon D500 housing features TTL converter electronics for automatic flash control. It also offers the possibility of using external flashes via two standard light connectors as well as two optional Nikonos sync cable bulkheads. This allows for easy mounting of all flash and lighting equipment. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. So small and so rich in technology! Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted by means of an M8 hole on the top of the enclosure and double threaded M6 holes on the bottom of the enclosure. Special features Ergonomic side grips, adjustable (via optional accessories) TTL converter electronics for automatic flash control included in scope of delivery Two fibre optic connectors Two sockets with electrical sync cable Rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 socket for mounting accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture alarm with LED and audible warning (replaceable battery) Removable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focus lamps Two M6 holes on the bottom of the body for various accessories such as flash or tripod mounts External viewfinders can be mounted, INON X-2 compatible

€3,350.00*

Nikon Z7 II / Z6 II Underwater Housing by Isotta

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. The Nikon Z7 II / Z6 II Underwater Housing by Isotta The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6 and Nikon Z7 II / Z6 II. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The Isotta underwater housing for Nikon Z7 II / 6 II is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 II / Z6 II. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls ON/OFF of Nikon Z7 II / Z6 II Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two optional electrical sync cord bulkheads Back housing completely detachable from the front housing Dedicated REC lever and ISO button Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing One M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€3,290.00*

Nikon D7200 Underwater Housing by Isotta

Through techniques and innovations based on years of experience, an easy-to-use, highly professional product has been created. Perfect handling of the Nikon D7200 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable even during long dives. Easy access to all major camera controls through clearly labeled, laser engraved, durable buttons, even when wearing gloves and dry diving gloves. Quick and easy camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is fully separated from the front body for easy camera mounting. External viewfinders can be mounted, INON X-2 compatible. Open and close with one hand. The housing for the Nikon D7200 is closed with Isotta's one-handed knob. It is the only single locking closure mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the bottom of the case. Ports and extension rings. A number of ports and extension rings are available in a special section. The detachable port is mounted to the Nikon D7200 thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing for the Nikon D7200 offers the ability to use external flashes via two standard light ports as well as two Nikonos sync cord ports. This allows for easy mounting of all flash and lighting equipment. Construction and Safety Only the best materials are used in the manufacture of our housings, such as anodized aluminum, which is corrosion resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red alarm for moisture/water inside the case is powered by a user replaceable battery. Working depth 100 meters. Various accessories can be attached using the M8 hole on the top of the walker and the double M6 threaded holes on the bottom of the walker. Special features. Ergonomic side handles, adjustable (ür via optional accessory) Two fiber optic ports Two connectors with electrical sync cable The rear enclosure is fully detachable from the front enclosure Pocket with latch for easy camera mounting One-hand lock for the rear housing An M16 connector für installation of accessories, such as vacuum valves or monitors. Aluminum buttons and dials with engraved symbols identical to the camera controls. All camera controls are external Searcher glass with wide Rück side. Optical viewfinder Double O-ring seals on all knobs and removable parts. Humidity sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Safety latch on ports to prevent accidental Öopening Wide, rubberized feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights. Two M6 holes on the bottom of the housing for various accessories such as mounts for flashes or tripods. External viewfinders can be mounted, INON X-2 compatible.

Sony a7 II Underwater housing by Isotta

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Open and close with one hand It is very easy to open and close the Sony a7 II, without any effort on the part of the user, the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place. Ports and extension rings A range of connectors and extension rings are available in the relevant section. The detachable port mounts to the Sony a7 II body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light Two fibre optic ports are located in front of the built-in flash and allow the use of an external flash. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom. Operation Sony a7II ON/OFF Ergonomic camera focus and shutter release for easy operation with gloves on Lens release Rear control panel Upper control panel All controls are on the body Special features: Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports; Two M16 ports for installation of accessories, e.g. vacuum valves or monitors; The rear housing is completely detachable from the front housing; Locking compartment for easy camera insertion; One-hand lock for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back and optical viewfinder; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

Canon EOS 5D Mark III Underwater Housing by Isotta

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Canon EOS 5D Mark III body is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all key camera controls with clearly labelled, laser engraved, durable buttons, even when wearing gloves and dry diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible. Open and close with one hand The Canon EOS 5D Mark III housing is locked with Isotta's one-handed, single-turn knob. It is the only single locking mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extensions A range of ports and extension rings are available in a dedicated section. The detachable port mounts to the Canon EOS 5D Mark III thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing of the Canon EOS 5D Mark III offers the possibility to use external flashes via two standard light connectors as well as two Nikonos sync cable sockets. This allows for easy mounting of all flash and lighting equipment. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing. Special features: Ergonomic side handles, adjustable (via optional accessories); Two fibre optic connectors (optional); Two standard sync cable sockets; Rear housing is fully detachable from the front housing; Locking compartment for easy camera mounting; One-hand lock for rear housing; One M16 connector for installation of accessories, e.g. vacuum valves or monitors; Aluminium buttons and dials with engraved symbols identical to the camera controls; all camera controls are external; Viewfinder glass with wide back; Optical viewfinder; double O-ring seals on all buttons and removable parts; Humidity sensor with LED and audible indicator (replaceable battery); Removable port - 120mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing; M8 hole on top of housing for various accessories such as focus lamps; Two M6 holes on the bottom of the housing for various accessories such as mounts for flash units or tripods; External viewfinders can be mounted, INON X-2 compatible;

€3,490.00*

Nikon D7100 Underwater Housing by Isotta

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D7100 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible. Open and close with one hand The housing for the Nikon D7100 is closed with the Isotta one-handed knob. It is the only single locking mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extension rings A range of connectors and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D7100 thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing for the Nikon D7100 offers the possibility to use external flashes via two standard light connectors as well as two Nikonos sync cable connectors. This allows for easy mounting of all flash and lighting equipment. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing. Special features: Ergonomic side handles, adjustable (via optional accessories) Two fibre optic outlets Two outlets with electrical sync cable The rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 port for installation of accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Detachable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

Nikon Z 7 / Z6 Underwater Housing by Isotta

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Product details The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 / Z6. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls ON/OFF of Nikon Z7 / Z6 Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two optional electrical sync cord bulkheads Back housing completely detachable from the front housing Dedicated REC lever and ISO button Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing One M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€3,290.00*

Panasonic GH5 (II) / GH5S Underwater Housing by Isotta

The housing for Panasonic Lumix GH5 (II) / Panasonic Lumix DC-GH5S allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details Underwater Housing Panasonic GH5 (II) / GH5S An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It’s very easy to open and close Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. Light and flash trigger Two fibre optic connections are located in front of the built-in flash and allow the use of external flash units. They have a manual flash triggering system that can be used with standard over-optical connections. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles, using the Isotta top handle or the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing; Features Ergonomic side handles, adjustable (via optional accessory); Two fiber optic connectors; Manual Flash Trigger included; Two M16 halls to be use optionally with electrical sync cord bulkheads and for installation of accessories, e.g. vacuum valves or monitors; Back housing completely separable from the front housing; Tray with lock for the easy fitting of the camera; Single-hand closing knob for back housing; Aluminum buttons and dials with engraved symbols identical to camera controls; Wide back display viewfinder glass with optical viewfinder; Dual O-Ring seals on all buttons and removable parts; Moisture sensor with LED indicator and acoustic signal (replaceable battery); Removable port - 102mm bayonet; Ports security latch to prevent accidental opening; Wide, rubber covered feet for solid footing on boat floors or sea floor; M8 hole located on upper side of the housing for various accessories such as focus lights; Two M6 holes positioned on housing bottom side for different accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

€3,100.00*

Canon EOS 5D Mark IV Underwater Housing by Isotta

The housing for Canon EOS 5D Mark IV allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Canon EOS 5D Mark IV housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Canon EOS 5D Mark IV is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom on the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Canon EOS 5D Mark IV. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING The housing for Canon EOS 5D Mark IV offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up in manual mode. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth 100 metres. Different accessories can be fitted by means of M8 hole positioned on upper side of the housing and double threaded M6 holes located on housing bottom side. Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connectors, not included Two standard electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing; Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing One M16 port for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Dual O-Ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights wo M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€3,490.00*

Sony a7 III Underwater Housing by Isotta

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Open and close with one hand It is very easy to open and close the Sony a7III without any effort by the user thanks to the upper spiral channel and the lower centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place. Ports and extension rings A range of ports and extension rings are available in the relevant section. The detachable port mounts to the Sony a7III body thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light Two fibre optic ports allow the use of external flashes through the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom. Operation Sony a7 III ON/OFF Ergonomic camera focus and shutter release for easy gloved operation Lens release Rear control panel Upper control panel All controls are on the body Special features Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports; Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors; The rear enclosure is fully detachable from the front enclosure; Locking compartment for easy camera insertion; One-handed locking button for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

€3,290.00*

Sony Alpha 7R IV Underwater Housing by Isotta

The housing for Sony a7R IV allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The underwater housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Sony a7R IV, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in the dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Sony a7R IV housing. The interchangeable port bodies and extensions rings allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING Two fiber optic connections allow the use of external strobe through the manual trigger (optional). The housing features two M16 holes and one M24 hole for installation of accessories, e.g. syncro cords, vacuum valves, monitors. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 threaded holes on the bottom. Controls ON/OFF of Sony a7R IV; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing; Technical data Ergonomic side handles, adjustable (via optional accessory); Two fiber optic connections; Two M16 holes and one M24 for installation of accessories, e.g. syncro cords, vacuum valves, monitors; Back housing completely detachable from the front housing; Tray with lock for the easy insertion of the camera; Single-hand closing knob for the back of the housing; Aluminum buttons and dials with engraved symbols identical to camera controls; Wide back display viewfinder glass; Double O-Ring seals on all buttons and removable parts; Moisture sensor with LED indicator (replaceable battery); Removable port -120 mm bayonet; Ports security latch to prevent accidental opening; Wide, rubber covered feet for solid footing on boat floors or sea floor; M8 hole located on upper side of the housing for various accessories such as focus lights; Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

€3,290.00*

Nikon D850 Underwater housing by Isotta

The Isotta underwater housing for Nikon D850 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details Isotta underwater housing for Nikon D850 An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Nikon D850 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon D850 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon D850. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. TTL CONVERTER FLASH (optional) The housing for Nikon D850 features TTL Converter Electronics for Automatic flash control. It also offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 hole positioned on the upper side of the housing and double threaded M6 holes located on housing bottom side. Highlights Ergonomic side handles, adjustable (via optional accessory) TTL converter electronics for automatic flash control not included Two fiber optic connectors (included) Two electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing One M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€3,490.00*

Nikon D7500 Underwater housing by Isotta

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D7500 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible. Open and close with one hand The housing for the Nikon D7500 is closed with the Isotta one-handed knob. It is the only single locking mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extension rings A range of connectors and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D7500 thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing for the Nikon D7500 offers the possibility to use external flashes via two standard light connectors as well as two Nikonos sync cable connectors. This allows for easy mounting of all flash and lighting equipment. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing. Special features Ergonomic side handles, adjustable (via optional accessories) Two fibre optic connections Two connections with electrical sync cable The rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 x 1 hole for mounting accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights Two M6 holes on the bottom of the body for various accessories such as mounts for flashes or tripods External viewfinders can be mounted, INON X-2 compatible

€3,390.00*

Sony a7S III Underwater Housing by Isotta

The housing for Sony Alpha 7S III allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. One Hand open/close It's very easy to open and close Sony Alpha 7S III, without efforts by the user thanks to the upper helicoid and the bottom centered Pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. Ports and Extensionrings A series of ports and extension rings are available in the dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Sony Alpha 7S III housing. The interchangeable port bodies and extensions rings allow the use of most of lenses on the market for maximum versatility and Performance. Lighting Two fiber optic connections allow the use of external strobe through the manual trigger (optional). The housing features two M16 holes and one M24 hole for installation of accessories, e.g. syncro cords, vacuum valves, monitors. Construction and Safety Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 threaded holes on the bottom. Controls ON/OFF of Sony Alpha 7S III Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Specifications Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two M16 holes and one M24 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port -120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€3,290.00*

Olympus E-M1 Mark III Underwater Housing by Isotta

The housing for Olympus OM-D E-M1 Mark III allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. Ergonomic side handles are included. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M1 Mark III, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102 mm connection to the Olympus OM-D E-M1 Mark III housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M1 Mark III; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing;

€2,190.00*

Sony a6600 Underwater Housing by Isotta

The Isotta underwater housing for Sony a660 allows to capitalize on the camera full potential and to capture amazing pictures underwater. An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Sony a6600, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in the dedicated section. The removable port is fitted thanks to markers and a bayonet 102 mm connection to the Sony a6600 underwaterhousing. The interchangeable port bodies and extensions rings allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING Two fiber optic connections allow the use of external strobe through the manual trigger. The housing features three M16 holes for installation of accessories, e.g. syncro cords, vacuum valves, monitors. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Sony a6600 Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Two fiber optic connections Three M16 holes for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port -120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€2,190.00*

Olympus E-M5 Mark III Underwater Housing by Isotta

The housing for Olympus OM-D E-M5 Mark III allows to capitalize on the camera full potential and to capture amazing pictures underwater. The Underwater housing for Olympus E-M5 Mark II by Isotta An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M5 Mark III, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Olympus OM-D E-M5 Mark III housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M5 Mark III Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Product Highlights Two fiber optic connectors One M16 port for installation of accessories, e.g. vacuum valves or monitors Back housing completely separable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for back housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass with optical viewfinder Double o-ring seal on all buttons and removable parts Moisture sensor with LED indicator (replacable battery) Removable port - 102mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€1,590.00*

Canon EOS R6 Underwater Housing by Isotta

With Canon EOS R6 the producer has focused on the photographer's creativity, wanting to support the user in his artistic flair with a camera defined as "radical". With silent shooting at 20 fps, Dual Pixel CMOS AF II sensors and ISO 102,400 this camera promises to meet expectations even under water, allowing you to photograph moving subjects even in low-light. The image stabilizer, 20 megapixel photos and the ability to shoot 4K video, make this camera complete. Built for speed, it produces up to 240 images in RAW format. The possibility of using the double memory card certainly helps to shoot more lightly. Product details Canon EOS R6 Underwater Housing by Isotta The housing respects all the key points of Isotta's line of housings: one-handed opening, double O-ring seals for greater safety, the use of high quality materials and the made in Italy craftsmanship. The housing was created to follow the lines of the camera, resulting small and manageable, while ensuring complete control of camera functions and absolute freedom in the use of accessories. MAN BEFORE MACHINE! The focus in the study of the housing goes to the diver who decides to use it. The comfort in the use and management of the machine in water is a fixed point, studied in every detail. The handles are ergonomic, adjustable and interchangeable*. if necessary; the housing is compact and lightweight, so you won't tire your arm too much and have an excellent control over stability. All buttons are conveniently reachable from the grip position of the handles ensuring maximum management of the camera with minimum effort. The rear back offers a full view of the camera screen so that you can shoot in live view unobstructed and in comfort and it detaches completely from the front body so that it is easy to insert the camera and perform operations inside the housing. The presence of the viewfinder allows you to take pictures framing in the classic way and to replace it with a magnifier. The closing knob is Single-hand actionable. MORE AND MORE CUSTOMIZABLE! Supplied with only the connections for the optical fiber, the housing has been designed with three M16x1 connections and one M24x1 connection, for total freedom in the choice of the conformation of the equipment. When ordering, you can select your preferred lighting control system choosing between Trigger, Sincro N5 or S6 and your right port system. Through the different combinations between ports and extension rings it is possible to use most of the lenses on the market. Various accessories can be used by means of an M8 hole located at the top of the case and two M6 threaded holes located at the bottom. To make it even more unique, have your name or logo engraved. SAFETY IS IMPORTANT! The locking pins on the back are made of stainless steel and penetrate the shell for added strength and security. The housing is made of aluminum, resistant and anti-corrosion, anodized in the unmistakable red color. The classic double o-ring seal is on all moving and removable parts ensures an optimal watertight seal. The camera is held straight, centered and in place by a mounting plate with a safety catch, which slips nimbly into the housing. NNo risk of sudden infiltration. A red humidity alarm inside the case is powered by a user-replaceable battery and instantly signals an increase in humidity in a critical area. Watertightness is guaranteed up to a maximum depth of 100 meters. Highlights Ergonomic side handles, adjustable (via optional accessory) Two built-in fiber optic connectors Two standard electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16x1 port for installation of accessories, e.g. vacuum valves or monitors One M24x1 port for installation of accessories, e.g. monitor Aluminum buttons and knobs and levers marked in the near with symbols identical to those of the machine in use Wide back display viewfinder glass Viewfinder Dual O-Ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON compatible

€3,390.00*

Olympus E-M1 Mark II Underwater Housing by Isotta

The housing for Olympus OM-D E-M1 Mark II allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. Ergonomic side handles are included. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M1 Mark II, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102 mm connection to the Olympus OM-D E-M1 Mark II housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M1 Mark II; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing;

€2,090.00*

Olympus E-M5 Mark II Underwater Housing by Isotta

The housing for Olympus OM-D E-M5 Mark II allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M5 Mark II, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Olympus OM-D E-M5 Mark II housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M5 Mark II; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing;

€1,490.00*

Sony a7R III Underwater Housing by Isotta

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The rear flap has a large window glass for a fine camera display and optical viewfinder and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Can be opened and closed with one hand It is very easy to open and close the Sony a7R III without the user having to do so using the top spiral and bottom centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera securely in place. Ports and extension ring A range of port and extension rings are available in the relevant section. The detachable port mounts to the Sony a7R III body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light Two fibre optic ports allow the use of an external flash via the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the Bottom. Operation Sony a7R III ON/OFF Ergonomic camera focus and shutter release for easy gloved operation Lens release Rear control panel Upper control Panel All controls are on the body Features: Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports; Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors; The rear enclosure is fully detachable from the front enclosure; Locking compartment for easy camera insertion; One-handed locking button for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

€3,290.00*

Canon EOS R5 Underwater Housing by Isotta

The new Canon EOS R5 promises a revolution in photography and cinema. By employing new technologies, including artificial intelligence for AF and an image stabilizer that comes with up to 8 stops* of protection against vibration, Canon aims to make users forget what they knew about Mirrorless cameras. 45-megapixel photos at 20 frames per second, 4K/120P full frame video and a choice of ISO 100-51200. This camera promises outstanding photos in any conditions. With the built-in, always-on Bluetooth Low Energy connection, establishing a fast Wi-Fi connection with a smart device and reviewing your shots already on the way back is a snap. * 8 stops based on standard CIPA tests with RF 24-105mm F4 L IS USM at a focal length of 105mm. Product details Canon EOS R5 Underwater Housing by Isotta The housing respects all the key points of Isotta's line of housings: one-handed opening, double O-ring seals for greater safety, the use of high quality materials and the made in Italy craftsmanship. The housing was created to follow the lines of the camera, resulting small and manageable, while ensuring complete control of camera functions and absolute freedom in the use of accessories. MAN BEFORE MACHINE! The focus in the study of the housing goes to the diver who decides to use it. The comfort in the use and management of the machine in water is a fixed point, studied in every detail. The handles are ergonomic, adjustable and interchangeable*. if necessary; the housing is compact and lightweight, so you won't tire your arm too much and have an excellent control over stability. All buttons are conveniently reachable from the grip position of the handles ensuring maximum management of the camera with minimum effort. The rear back offers a full view of the camera screen so that you can shoot in live view unobstructed and in comfort and it detaches completely from the front body so that it is easy to insert the camera and perform operations inside the housing. The presence of the viewfinder allows you to take pictures framing in the classic way and to replace it with a magnifier. The closing knob is Single-hand actionable. MORE AND MORE CUSTOMIZABLE! Supplied with only the connections for the optical fiber, the housing has been designed with three M16x1 connections and one M24x1 connection, for total freedom in the choice of the conformation of the equipment. When ordering, you can select your preferred lighting control system choosing between Trigger, Sincro N5 or S6 and your right port system. Through the different combinations between ports and extension rings it is possible to use most of the lenses on the market. Various accessories can be used by means of an M8 hole located at the top of the case and two M6 threaded holes located at the bottom. To make it even more unique, have your name or logo engraved. SAFETY IS IMPORTANT! The locking pins on the back are made of stainless steel and penetrate the shell for added strength and security. The housing is made of aluminum, resistant and anti-corrosion, anodized in the unmistakable red color. The classic double o-ring seal is on all moving and removable parts ensures an optimal watertight seal. The camera is held straight, centered and in place by a mounting plate with a safety catch, which slips nimbly into the housing. NNo risk of sudden infiltration. A red humidity alarm inside the case is powered by a user-replaceable battery and instantly signals an increase in humidity in a critical area. Watertightness is guaranteed up to a maximum depth of 100 meters. Highlights Ergonomic side handles, adjustable (via optional accessory) Two built-in fiber optic connectors Two standard electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16x1 port for installation of accessories, e.g. vacuum valves or monitors One M24x1 port for installation of accessories, e.g. monitor Aluminum buttons and knobs and levers marked in the near with symbols identical to those of the machine in use Wide back display viewfinder glass Viewfinder Dual O-Ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON compatible

€3,390.00*

Olympus E-M5 Mark II Underwater Housing by Isotta

The housing for Olympus OM-D E-M5 Mark II allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M5 Mark II, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Olympus OM-D E-M5 Mark II housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M5 Mark II; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing;

€1,690.00*

Canon EOS R5 Underwater Housing X-2 R5 by INON

Underwater housing X-2 R5 by INON A housing for Canon EOS R5 INON strobe compatible ultra-accurate multi-functional built-in "TTL Converter" as standard feature Control flash amount directly from camera 12 shots/sec. continuous shooting supported Equipped with “Quick Shoe System” for quick switch between horizontal and vertical camera composition Standard “Vacuum Leak Sensor (PAT. P)" checks housing sealing in only 5 minutes MRS port further evolves to support fine manual focusing Optional two viewfinders provide bright and clear finder image Lightweight and compact ultra-precision cast aluminum body Ultra-accurate multi-functional built-in "TTL Converter" The "TTL Converter" equipped as a standard feature, triggers INON strobe optically to enjoy fully automatic TTL. Exclusively developed for INON strobe based on its flash protocol to optimize its performance for underwater use. As an underwater strobe manufacturer, we successfully achieved the TTL Converter that provides constant, stable and highly accurate TTL exposure. Strobe manual power is directly adjustable from camera INON strobe manual power is directly adjustable from camera ranging between 1/64 and FULL at 1/3EV. increments. Useful when strobe is positioned away like on long strobe arm or when shooting with backlit technique. 12 shots/sec. continuous strobe firing ***** The TTL Converter fully supports [High speed continuous][High speed continuous+]. With ultra-accurate TTL shooting is now available for continuous shooting based on electricity stored in a capacitor6. INON TTL Converter strives efficiency in battery consumption not to miss precious moment and successfully provides more than 100,000 flash triggering only by two CR2032 coin batteries. Built-in Quick Shoe System supports quick camera composition Change The base plate is INON's unique Arca Swiss style "Quick Shoe Main Base". The "Quick Shoe W50 Plate" on the bottom and side of the housing allows you to quickly change to vertical composition. In addition to vertical composition without changing lighting position, it also allows you to shoot vertical composition from low angle which is not possible with conventional system. Built-in "Vacuum leak sensor" confirms housing sealing in 5 minutes The "Vacuum Leak Sensor" ensures housing sealing by monitoring air pressure inside of the housing during leak check and warns accidental flooding with LED blinks and buzzer during diving. The onboard pressure sensor changes sensitivity for leak check and diving by variable control program (PAT. P). The supersensitive pressure sensor detects even fine leakage. Not as like conventional leak sensors, it drastically shortens test time (from 30 seconds to 5 minutes). The sensitivity of the dive mode eliminates false alarm even when ambient temperature changes. New S-MRS Port Newly developed S-MRS (Magnetic Rotary System) controls focusing and zooming by magnetic attraction. The new S-MRS provides smoother operation with less play or rattle comparing to the previous model. By combining the EOS R5 with an RF lens, the MF Peaking function can also be used during full-time manual focusing. Together with the focus guide function, this enables ultra-precise focusing. Maximum three MRS Control Rings can be installed to control the Control Ring, Focus Ring and SA Control Ring. Lightweight and compact ultra-precision cast aluminum body The X-2 R5 is made from corrosion resistance aluminum alloy by ultraprecise cast manufacturing technique to fuse design, weight and durability in higher dimension. The cast manufacturing technique enables thin body plate with complicated curved design which is not possible with machining. Lightweight and durable aluminum alloy body has acquired reliability, durability and controllability even in severe underwater.

€3,190.00*

Nikon Z9 Underwater Housing by Isotta

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Isotta's Nikon Z9 Underwater Housing The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z9. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls On and off lever of the Nikon Z9 Ergonomic camera focusing and shutter lever, easy to use with gloves Lens release lever Front dial Fn1 lever Fn2 lever Fn3 lever ISO button MODE button BKT button Flash button +/- button Focus mode button Quick release-mode button Zoom knob Port safety lever Movie lever (REC) AF-ON lever Rear dial R Release mode knob I (info) button Menu button AEL button DISP. button Multi-selector Playback, Viewing pictures button Zoom-in (+) button Zoom-out (-) button Qual button WB button Delete button Fn4 button Photo/video selector On/Off Display lever Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections standard (to shoot it needs an additional trigger) Three M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port 120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€5,490.00*

Sony Alpha 1 Underwater housing by Isotta

The underwater housing for the Sony Alpha 1 allows you to exploit the camera's full potential and capture amazing images underwater. Details of the Isotta underwater housing for Sony Alpha 1 Technology and Innovation gained from years of experience has resulted in an easy-to-use, highly professional product. Easy access to all the camera's buttons/main controls, even when wearing gloves, thanks to clearly labelled, laser-etched buttons with a long service life. The rear panel has a large viewing window for a good overview of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The housing is very stable thanks to robust and wide rubber feet on the underside. One-handed open/close Opening and closing the Sony Alpha 1 is very easy and effortless thanks to the upper screw bolt and the lower centred pins; the camera is simply placed in the housing on a sliding tray that holds the camera stably in Position. Ports and extensions A range of ports and extension rings are available in the designated area. The detachable port is attached to the body of the Sony Alpha 1 Underwater housing by Isotta thanks to markings and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light control Two fibre optic connections allow the use of an external strobe via the manual trigger (optional). The Isotta undewater housing for Sony alpha 1has one M28 and M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is anti-corodal and thermo-coated, and stainless steel. A durable product that requires easy and simple maintenance by the user. Two high precision and high quality O-ring seals protect and ensure a perfect and secure seal of all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be attached directly to the handles or via an upper M8 threaded hole, via the Isotta top handle or via the M6 threaded holes on the bottom. Controls On and off lever of the della Sony Alpha 1; Ergonomic camera focusing and shutter lever, easy to use with gloves; Lens release lever; Aperture knob; C1 lever; C2 button; Mode knob; Focus selector knob; Zoom knob; Port safety lever; REC lever; AF-ON lever; Multi-shot selector knob; Shutter speed knob; Exposure knob; Lock/unlock exposure dial button; Rear control panel of the camera; Technical data Red color anodized aluminum body; Ergonomic side handles, adjustable (via optional accessory); Two fiber optic connections standard;* Two M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors; Back housing completely detachable from the front housing; Tray with lock for the easy insertion of the camera; Single-hand closing knob for the back of the housing; Aluminum buttons and dials with engraved symbols identical to camera controls; Wide back display viewfinder glass; Double O-Ring seals on all buttons and removable parts; Moisture sensor with LED indicator (replaceable battery); Removable port 120 mm bayonet; Ports security latch to prevent accidental opening; Wide, rubber covered feet for solid footing on boat floors or sea floor; M8 hole located on upper side of the housing for various accessories such as focus lights; Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible; Depth rated to 100 metres;

€3,490.00*

Sony A7R V Underwater Housing by Isotta

The Isotta underwater housing for the Sony A7R V Controls On/off lever for the Sony Alpha 7R V Ergonomic lever for focusing and releasing the camera, easy to use even with gloves on Lens release lever Front command dialC1 button; C2 button; C3 button; C4/delete button Mode dial Still Picture/Movie/S&Q lever Zoom knob Connection safety lever Movie (REC) lever AF-ON lever Rear L dial rear control dial R Lock button rear control dial R Menu button AEL button Multi-selector playback button Buttons on the control wheel Fn button

€3,390.00*

Sony A7 IV Underwater Housing by Isotta

Details of the Isotta underwater housing for Sony Alpha 7 IV Techniques and innovations gained from years of experience have resulted in an easy-to-use, highly professional product. Easy access to all camera buttons/main controls, even when wearing gloves, through clearly labelled, laser-etched buttons with long life. The back cover has a large viewing window for a good overview of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The housing is very stable due to the robust and wide rubber grippers on the underside. One-handed opening/closing Opening and closing the Isotta underwater housing for the Sony Alpha 7 IV is very easy and effortless thanks to the upper screw bolt and the lower centred pins; the camera is simply placed in the housing on a sliding tray that holds the camera stably in position. Ports and extensions A number of ports and extension rings are available in the designated area. The detachable port is attached to the underwater housing of the Sony Alpha 7 IV thanks to markings and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light control Two fibre optic ports allow the use of an external strobe via the manual output (optional). The housing has M28 and M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our housings, such as anodised aluminium, which is anti-corodal and thermo-coated, and stainless steel. A durable product that requires easy and simple maintenance by the user. Two high precision and high quality O-ring seals protect and ensure a perfect and secure seal of all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be attached directly to the handles or via an upper M8 threaded hole, via the Isotta top handle or via the M6 threaded holes on the underside.

€3,290.00*

Canon EOS R6 II Underwater Housing X-2 by INON

Underwater housing X-2 R6 Mark II by INON A housing for Canon EOS R6 Mark II INON strobe compatible ultra-accurate multi-functional built-in "TTL Converter" as standard feature Control flash amount directly from camera 12 shots/sec. continuous shooting supported Equipped with “Quick Shoe System” for quick switch between horizontal and vertical camera composition Standard “Vacuum Leak Sensor (PAT. P)" checks housing sealing in only 5 minutes MRS port further evolves to support fine manual focusing Optional two viewfinders provide bright and clear finder image Lightweight and compact ultra-precision cast aluminum body Ultra-accurate multi-functional built-in "TTL Converter" The "TTL Converter" equipped as a standard feature, triggers INON strobe optically to enjoy fully automatic TTL. Exclusively developed for INON strobe based on its flash protocol to optimize its performance for underwater use. As an underwater strobe manufacturer, we successfully achieved the TTL Converter that provides constant, stable and highly accurate TTL exposure. Strobe manual power is directly adjustable from camera INON strobe manual power is directly adjustable from camera ranging between 1/64 and FULL at 1/3EV. increments. Useful when strobe is positioned away like on long strobe arm or when shooting with backlit technique. 12 shots/sec. continuous strobe firing ***** The TTL Converter fully supports [High speed continuous][High speed continuous+]. With ultra-accurate TTL shooting is now available for continuous shooting based on electricity stored in a capacitor6. INON TTL Converter strives efficiency in battery consumption not to miss precious moment and successfully provides more than 100,000 flash triggering only by two CR2032 coin batteries. Built-in "Vacuum leak sensor" confirms housing sealing in 5 minutes The "Vacuum Leak Sensor" ensures housing sealing by monitoring air pressure inside of the housing during leak check and warns accidental flooding with LED blinks and buzzer during diving. The onboard pressure sensor changes sensitivity for leak check and diving by variable control program (PAT. P). The supersensitive pressure sensor detects even fine leakage. Not as like conventional leak sensors, it drastically shortens test time (from 30 seconds to 5 minutes). The sensitivity of the dive mode eliminates false alarm even when ambient temperature changes. New S-MRS Port Newly developed S-MRS (Magnetic Rotary System) controls focusing and zooming by magnetic attraction. The new S-MRS provides smoother operation with less play or rattle comparing to the previous model. By combining the EOS R5 with an RF lens, the MF Peaking function can also be used during full-time manual focusing. Together with the focus guide function, this enables ultra-precise focusing. Maximum three MRS Control Rings can be installed to control the Control Ring, Focus Ring and SA Control Ring. Lightweight and compact ultra-precision cast aluminum body The X-2 R6 II is made from corrosion resistance aluminum alloy by ultraprecise cast manufacturing technique to fuse design, weight and durability in higher dimension. The cast manufacturing technique enables thin body plate with complicated curved design which is not possible with machining. Lightweight and durable aluminum alloy body has acquired reliability, durability and controllability even in severe underwater.

€2,890.00*

Canon EOS R6 Underwater Housing X-2 by INON

Underwater housing X-2 R6 by INON A housing for Canon EOS R6 INON strobe compatible ultra-accurate multi-functional built-in "TTL Converter" as standard feature Control flash amount directly from camera 12 shots/sec. continuous shooting supported Equipped with “Quick Shoe System” for quick switch between horizontal and vertical camera composition Standard “Vacuum Leak Sensor (PAT. P)" checks housing sealing in only 5 minutes MRS port further evolves to support fine manual focusing Optional two viewfinders provide bright and clear finder image Lightweight and compact ultra-precision cast aluminum body Ultra-accurate multi-functional built-in "TTL Converter" The "TTL Converter" equipped as a standard feature, triggers INON strobe optically to enjoy fully automatic TTL. Exclusively developed for INON strobe based on its flash protocol to optimize its performance for underwater use. As an underwater strobe manufacturer, we successfully achieved the TTL Converter that provides constant, stable and highly accurate TTL exposure. Strobe manual power is directly adjustable from camera INON strobe manual power is directly adjustable from camera ranging between 1/64 and FULL at 1/3EV. increments. Useful when strobe is positioned away like on long strobe arm or when shooting with backlit technique. 12 shots/sec. continuous strobe firing ***** The TTL Converter fully supports [High speed continuous][High speed continuous+]. With ultra-accurate TTL shooting is now available for continuous shooting based on electricity stored in a capacitor6. INON TTL Converter strives efficiency in battery consumption not to miss precious moment and successfully provides more than 100,000 flash triggering only by two CR2032 coin batteries. Built-in "Vacuum leak sensor" confirms housing sealing in 5 minutes The "Vacuum Leak Sensor" ensures housing sealing by monitoring air pressure inside of the housing during leak check and warns accidental flooding with LED blinks and buzzer during diving. The onboard pressure sensor changes sensitivity for leak check and diving by variable control program (PAT. P). The supersensitive pressure sensor detects even fine leakage. Not as like conventional leak sensors, it drastically shortens test time (from 30 seconds to 5 minutes). The sensitivity of the dive mode eliminates false alarm even when ambient temperature changes. New S-MRS Port Newly developed S-MRS (Magnetic Rotary System) controls focusing and zooming by magnetic attraction. The new S-MRS provides smoother operation with less play or rattle comparing to the previous model. By combining the EOS R5 with an RF lens, the MF Peaking function can also be used during full-time manual focusing. Together with the focus guide function, this enables ultra-precise focusing. Maximum three MRS Control Rings can be installed to control the Control Ring, Focus Ring and SA Control Ring. Lightweight and compact ultra-precision cast aluminum body The X-2 R6 is made from corrosion resistance aluminum alloy by ultraprecise cast manufacturing technique to fuse design, weight and durability in higher dimension. The cast manufacturing technique enables thin body plate with complicated curved design which is not possible with machining. Lightweight and durable aluminum alloy body has acquired reliability, durability and controllability even in severe underwater.

€2,890.00*

Straight Viewfinder Unit II for X-2 (narrow)

Login

Ask a question

Previously asked questions