Sony A7R V Underwater Housing by Isotta
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Product number:
AS3965
The Isotta underwater housing for the Sony A7R V
Controls
- On/off lever for the Sony Alpha 7R V
- Ergonomic lever for focusing and releasing the camera, easy to use even with gloves on
- Lens release lever
- Front command dialC1 button; C2 button; C3 button; C4/delete button
- Mode dial
- Still Picture/Movie/S&Q lever
- Zoom knob
- Connection safety lever
- Movie (REC) lever
- AF-ON lever
- Rear L dial
- rear control dial R
- Lock button rear control dial R
- Menu button
- AEL button
- Multi-selector
- playback button
- Buttons on the control wheel
- Fn button
| Body Material: | aluminum |
|---|---|
| Camera System: | Mirrorless (MIL) |
| Camera manufacturer: | Sony |
| Tripod connection: | Thread ¼ |
| portsystem: | B120 |
Technical data
- Red color anodized aluminum Body
- Sizes (LxHxP): 281.6x185.3x126.9
- Depth rated to 100 metres
Scope of delivery
- Underwater housing for the Sony Alpha 7R V
- Front cover
- handles
- ISOTTA standard viewfinder
- Humidity sensor
- Fibre optic connectors (an additional flash trigger is required for triggering)
- Replacement O-ring kit
- Silicone grease 15gr
Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.
Login
There aren't any asked questions yet.
Flash Trigger
Bulkhead Nikonos TTL
€70.00*
Connects your flash to the Isotta housing via an electronic sync cable with this 5-pin bulkhead.
Manual flash trigger
€280.00*
Manual flash trigger for mirrorless and SLR cameras in the Isotta underwater housing. This is installed directly when ordered together with an underwater housing from Isotta.
Bulkhead S6
€85.00*
The strobe can be connected to the Isotta housing with this 6-pin bulkhead via an electronic sync cable.
TTL-Converter for Sony A7-A9 in ISOTTA housings
TTL-Converter for SONY A1-A9 cameras for ISOTTA underwater housings, including Leak Detector electronics, Sirene, Leak Sensor, and 2 pcs LEDs (without Optical Bulkheads).
Compatible underwater strobes: Inon Z-330 / Z-240 / S-2000, Sea&Sea YS-D1 / YS-D3 Mark II / YS-250, Ikelite DS-230 / DS-162 / DS161 /, DS160 / DS-125, Subtronic Pro-270 / Pro-160, Retra Pro X (including HSS).
Two optional ISOTTA electric bulkheads are supported as well, onboard sockets have ISOTTA style pinout. This TTL board is purposed for installation instead of Isotta electronics, directly on the metall wall of the housing upper front part, or on the plastic podium in the same place. Check your housing regarding such installation version before TTL system purchasing.
Similar products
Sony A7R V Underwater Housing by Nauticam
€3,938.00*
With each new generation of camera, Sony continues to make giant strides in the way images are taken and processed. The Sony a7R V shares the same 61MP sensor as the previous a7R IV, however it has made huge advancements in processing capacity which brings improvements across the board. With a newly developed AI processing unit, the Sony a7R V brings an all new autofocus system which builds upon more intelligent subject tracking and recognition. The a7R V features 8 stops of image stabilization and an impressive array of video capabilities including 8K 10-Bit internal recording and 16-Bit RAW external recording over HDMI which are sure to make this a popular choice among underwater shooters.
The Sony alphy 7R V Camera
The Sony a7R V is Sony’s fifth generation, high-resolution full-frame mirrorless camera. The 61.0-megapixel full-frame back-illuminated Exmor R CMOS sensor combined with BIONZ XR imaging engine delivers unprecedented resolution, fine gradation, and low noise at a processing speed increased by 8x that of the a7R IV. Relative to previous generations, it promises more robust build quality, refined controls, and the company's latest autofocus.
The new processor brings the power to significantly enhance the camera's subject recognition capabilities for auto focus. The a7R IV had the ability to recognize and prioritize people, their faces and eyes, but the a7R V takes this much further. The a7R V is designed to better recognize human subjects but also trained to recognize a wider range of non-human subject types.
In addition to 8K shooting, 4K video is oversampling from 6.2k pixels without binning, to deliver maximum detail, and offers up to 60p shooting and S-Cinetone for superior cinematic expression. The camera also gives the creative freedom to continuously shoot up to 583 compressed RAW images at 10 fps.
Camera Specs
61.0 MP full-frame back-illuminated Exmor R™ CMOS sensor
Next-generation AF with Real-time Recognition autofocus deep learning AI
4K 16-Bit Raw Output; S-Log3/S-Cinetone
8K 24p, 4K 60p, FHD 120p 10-Bit Video
3.2" 4-Axis Multi-Angle Touchscreen LCD
8-Stop 5-Axis Image Stabilization
Continuously shoot up to 583 compressed RAW images at 10 fps
9.44m-Dot EVF with 120 fps Refresh Rate
Setup-Example
Nauticam NA-A7R V Underwater Housing
The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.
The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.
MISSION CONTROL
The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.
The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.
CAMERA COMPATIBILITY
The NA-A7RV housing is compatible with both the Sony a7R V and the Sony a7 IV. To use the Sony a7 IV, the NA17433UK Conversion Kit is required.
HDMI 2.0
A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders. An additional M10 threaded mounting position near the front center of the housing also makes using an external monitor even easier. The Sony a7R V can output 16-bit RAW video output to external recorders at up to 4K 60p. See the resources sidebar for additional details and recommended setups.
PREMIUM PROFESSIONAL OPTICS
Built around the N100 Port System for Sony E-Mount, the NA-A7RV can support a wide variety of native lenses with a selection of Optical Glass and Acrylic ports. When used with an E-Mount to EF-mount lens adapter and an N100 to N120 adapter (see Resources sidebar for supported adapters), the NA-A7RV can be used with the Canon N120 EF-Mount port system, expanding the capabilities of the system even further. Going beyond conventional optics the NA-A7RV can leverage the unparalleled optical quality of Nauticam's Water Contact optics such as the WACP-1 or WWL-1B which offers up to 130º field-of-view, full zoom through, an almost 0" minimum focus distance with supported lenses. For macro, the SMC-1 and SMC-2 deliver tack-sharp super-macro magnification levels up to 4x with the Sony 90mm macro lens.
VACUUM CHECK AND LEAK DETECTION
The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (NA25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
STROBE TRIGGERING
Triggering of external strobes is accomplished via the integrated fiber-optic bulkheads when using the optional Mini Flash Trigger for Sony (NA26302). Electronic triggering is also available via an optional Nikonos or Ikelite Style Bulkhead.
Sony a7R V Underwater Housing by Sea&Sea
€4,995.00*
Universal compatibility(*) with Sony Alpha series.
The future-oriented mirrorless SLR compatible housing is now fully loaded.
(*) For other Sony Alpha cameras customize kits a needed. Please contact us.
Enhancement Customization Kit
The shooting mode lever cannot be used. This can be handled by using an optional kit. S&Q cannot be used.
Universal design for the future The back panel is designed to be large.
The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight.
Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.
Full range of standard equipment
Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place.
Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.
Newly designed fiber-optic cable cover
Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.
Leak Alarm Unit as standard equipment
The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment.
It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included.
Strobe Synchro System
The fiber-optic cable connection enables manual firing of the YS strobe.
Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control.
YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions.
Focus Point Movement Settings
To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial.
Other Features
The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
All controls have luminescence stickers which glow in dark environment.
Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used.
※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting.
Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
Tripod screw mount is located on the centre underside of the housing.
Equipped with under guard to protect from scrach.
Ball heads
on stock
Top Handle
€115.00*
This tray applied on top of the housing and fixed to the handles, allows the use of optional accessories with the Isotta's DSLR and Mirrorless housings.
Custom engraving
€29.00*
Give your underwater housing from Isotta your own personal touch and have your name laser-engraved into the signal red housing.
on stock
45° Viewfinder Unit II for X-2
€550.00*
Enables to see all finder image without vignetting even through a mask by extending eye point without changing finder image size (1.0x). 45º angled eyepiece benefits you to shoot a low angle subject like a goby on sand area etc. Also the eyepiece rotates 360º supporting comfortable vertical low angle shot.
Optically designed to suit to an EVF: electrical viewfinder of a full size DSLR camera providing wider viewing angle having minimal vignetting or blurred part even at corners. The viewfinder provides same magnification as camera’s viewfinder (1.0x) and extends its eye-point at 60 mm/2.4 in. not to have vignetting even through a mask. High quality optical components are carefully housed in a small, light yet durable body which is made from corrosion resistant aluminum alloy and FRP: fiber reinforced plastic.
Vacuum System
€230.00*
Easy and intuitive way to use
?Lights system for the passages of the vacuum
Closing cap secured to the Vacuum bulkhead
?One hand vacuum pump
Release of internal pressure by traction
Electronics with pressure detection System