Sony A7 IV Underwater Housing by Nauticam

€3,775.00*

Prices incl. VAT plus shipping costs

Free shipping

Delivery time: 9 days*

M14 Vacuum Valve II

€205.00*

Full Frame Angle Viewinder 32°/ 1:1

€1,590.00*

Product number: NA17432

HAN: NA-A7IV

It's been three years since the release of the Sony α7III full-frame mirrorless camera and the followup α7IV delivers many of the new features we've seen in other models packaged into this true hybrid imaging system. A new high-resolution 33MP BSI sensor powered by the BIONZ XR processor delivers 4k60p internal capture without crop in 4:2:2 10-bit 600Mbps quality or 30p downsampled from the full 7K sensor width. Paired with massively improved autofocus, 15+ stops of dynamic range and new Active Mode 5-axis stabilization makes this a powerful high resolution photo and video platform worthy of the α7 badging.

THE SONY ALPHA 7 Mark IV Camera

The Sony α7 line of full-frame mirrorless cameras has long been at the forefront of offering a variety of models with similar form factor that are geared towards different shooting styles. With the α7 RIII and RIV, the focus was on low-light video-centric and ultra high resolution respectively while the α7IV marries the two to create a true hybrid shooting platform. The Exmor R backside-illuminated 33MP full-frame sensor delivers high resolution still photos while leveraging the large sensor size to provide ultra-sharp and color-rich video downsampled from the full 7K sensor width.

Camera Specs

33MP full-frame Exmor R™ BSI CMOS sensor with BIONZ XR™ processor
4K 60p 10-bit 4:2:2 video without crop
4K 30p 10-bit 4:2:2 downsampled from full sensor width 7K w/o pixel binning
Real-time Eye-AF for humans and animals
S-Log3 gamma for maximum Dyanmic Range capture
5-axis in-body image stabilization

AUTOFOCUS

The α7IV's improved autofocus system borrows heavily from Sony's other α series releases of late using their Fast Hybrid AF system which combines phase-detection and contrast-detection to provide fast and accurate focus. The AF area is expanded to cover almost 94% of the frame with 759 AF-points. Sony's latest Real Time Tracking and Eye AF modes promise to provide both accurate focus tracking for stills and video. A new Focus Map feature allows for easier visualization of depth of field when filming. to help insure the critical parts of your subject are sharp.

4K VIDEO

4K 60p video captured with 10-bit 4:2:2 quality at up yo 600Mbps without crop sets the α7IV squarely with its peers in video capabilities. Adding in the option to capture 30p downsampled from the full 7K sensor width gives the user the option to choose the right mode for their shooting style. Capturing video in the S-Log3 gamma profile gives access to the camera's full 15+ stops of dynamic range for increased latitude in post processing.

IMPROVED CONTROLS

In addition to upgrading the autofocus, video and still capture capabilities of the camera, the α7IV also now has the option to maintain discrete settings for video and still modes. The dedicated dial atop the camera makes switching between modes hassle free. The menu system has also been upgraded to make navigation easier and more similar to other recent models.

NAUTICAM NA-A7IV UNDERWATER HOUSING

The NA-A7IV underwater housing by Nauticam is designed as an optimized solution for both underwater still and moving image capture. Outfitted with Nauticam's extensive lineup of accessories, the NA-A7IV can be customized to excel in either role. The latest in a long lineup of Sony mirrorless system housings, the NA-A7IV features the same intuitively placed controls, easy setup, and rugged reliability user's have come to expect.

MISSION CONTROL

Never miss a shot looking for a button or dial. Regardless of where the control may be found on the camera, Nauticam engineers have placed that control on the housing where it is needed most. Essential dials and buttons are within easy reach of the reinforced ergonomic handles. Atop the housing, a new dedicated lever allows quick switching between Still, Movie and S&Q (VFR Video) modes. A dual thumb lever near the right handle actuates the REC and AF-ON buttons and a single lever near the left handle is for PLAYBACK.

HDMI 2.0

A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders. An additional M10 threaded mounting position near the front center of the housing also makes using an external monitor even easier. The A7IV can output 4:2:2 10-bit 4K at up to 60fps to external recorders allowing for recording in edit-friendly codecs such as ProRes. See the resources sidebar for additional details and recommended setups.

PREMIUM PROFESSIONAL OPTICS

Built around the N100 Port System for Sony E-Mount, the NA-A7IV can support a wide variety of native lenses with a selection of Optical Glass and Acrylic ports. When used with an E-Mount to EF-mount lens adapter and an N100 to N120 adapter (see Resources sidebar for supported adapters), the NA-A7IV can be used with the Canon N120 EF-Mount port system, expanding the capabilities of the system even further. Going beyond conventional optics the NA-A7IV can leverage the unparalleled optical quality of Nauticam's Water Contact optics such as the WACP-1 which offers up to 130º field-of-view, full zoom through, an almost 0" minimum focus distance with supported lenses. For macro, the SMC-1 and SMC-2 deliver tack-sharp super-macro magnification levels up to 4x with the Sony 90mm macro lens.

VACUUM CHECK AND LEAK DETECTION

The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

STROBE TRIGGERING

Triggering of external strobes is accomplished via the integrated fiber-optic bulkheads when using the optional Mini Flash Trigger for Sony (26302). Electronic triggering is also via an optional Nikonos Bulkhead. Note that when using this with the Vacuum Valve will require the optional M14 Offset Connector with Vacuum Valve II (25026).

Arm Attachment:	1-inch ballhead
Body Material:	aluminum
Camera System:	Mirrorless (MIL)
Camera manufacturer:	Sony
Strobe connector:	optical Sea&Sea
Tripod connection:	Thread ¼
portsystem:	N100

Technical data

Depth Rating: 100m

Weight: 2.7 kg

Dimensions: 340x 170mm x 125mm

Scope of delivery

Sony A7 IV Underwater Housing by Nauticam

Spare Main O-ring, o-ring remover and lubricant

CR-2032 Battery (for Moisture Alarm)

Set of Allen Keys

Instruction Manual

padded Travel Bag

Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.

Manuals

NA17432_Sony A7IV Unterwassergehäuse Bedienungsanleitung Nauticam-en.pdf

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

HDMI 2.0

Atomos Ninja V Underwater housing by Nauticam

With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas. THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.

€2,435.00*

on stock

M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)

€55.00*

HDMI 2.0 Cable M24A3R140-M28A1R170 by Nauticam

This is the HDMI 2.0 cable necessary to use the NA-A7SIII with the 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player. Note: this cable supports RAW 16bit 4.2K (4264 x 2408) up to 59.94p output but actual capture quality is subject to recorder capabilities.

€265.00*

Atomos Ninja V (SDI) Underwater Housing by Nauticam

This version is suitable to accommodate the Atomos AtomX SDI module. With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest areas. THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.

€2,660.00*

Macro

Super Macro Konverter SMC-1

THE FINEST MACRO ACCESSORY LENS FOR DSLR/MIL CAMERAS The Nauticam Super Macro Converter 1 (SMC-1) is the first underwater macro conversion lens that is fully optimized for in water use. This unique and innovative lens will change the way that underwater macro photography is done. BREAKTHROUGH LENS DESIGN Prior to the Super Macro Converter, achieving "super macro" underwater meant using tools that were designed for in air use. These tools simply do not take into account the physics of shooting in water. The SMC takes a radically different approach: treat the system ? camera, lens, port, air, and water ? as a whole, and account for the air-water interfaces in a conversion lens design to achieve the best image quality possible. The improvement is stunning, measurable and a new standard in underwater macro imaging has been established. "This is the sharpest accessory macro lens I have used. Something that it is truly remarkable because it is also the most powerful. Fantastic performance from the centre of the frame to the corners. It is a lens that pushes back the boundaries of the types of photos we can take underwater." -Dr. Alex Mustard (www.amustard.com) Three key advantages to this internationally patent pending new optical design: Higher Magnification Than Other Popular Super Macro Tools with Increased Working Distance Better Edge to Edge Image Quality, Higher Contrast, and Lower Color Fringing Compatibility with "short" macro lenses that traditionally have not worked well with super macro accessories, like Canon EF-S 60mm, Panasonic Leica DG Macro-Elmarit 45mm f/2.8 ASPH. MEGA O.I.S., Olympus 12-50mm f/3.5-6.3 ED M.Zuiko EZ Micro 4/3 Lens, and Olympus M.ZUIKO DIGITAL ED 60mm f/2.8 Macro. Edward Lai, Managing Director of Nauticam, has utilized a revolutionary approach in developing the SMC. This is a completely new lens design, developed through hundreds of engineering hours utilizing computer software to model the optical properties of the complete underwater imaging system. Incorporating these factors into the design yields amazing sharpness, contrast, and clarity that isn't available from a simple magnifying lens for use in air sealed in a waterproof enclosure. UNCOMPROMISED OPTICAL QUALITY The Super Macro Converter is constructed from lenses are precision crafted of specially formulated low dispersion optical grade glass, ground to the most demanding standards. These exceptional measures, enhanced by broadband anti-refective coatings effectively reduce common optical issues such as chromatic aberrations, coma, spherical aberration, and field deformation associated with underwater macro photography using traditional magnifying lenses. These optics are assembled in a rugged hard anodized aluminum housing, and nitrogen purged during assembly to eliminate fogging. STUNNING MAGNIFICATION When combined with a full frame camera and a 100mm or 105mm macro lens, the device converts the optical system to provide a maximum of 2.3X magnification factor. In other words, a subject area of 15.6mm X 10.4mm will fill the whole frame of a 36mm X 24mm sensor. IMPROVED SHARPNESS AND CONTRAST As the Super Macro Converter is optimized explicitly for using together with a macro lens underwater, images captured exhibit exceptional sharpness compared with conventional magnification lenses. Thanks to the broadband multi-layer anti-reflection coating on each surface of the lenses, images also exhibit higher contrast. SUPERB LIGHT TRANSMISSION All the lens elements installed inside the SMC are optically optimized to appropriate diameters so as to provide maximum light transmission. The SMC doesn't suffer from vignette issues under even the most extreme conditions. The broad band multi-layer anti-reflection coating on all surfaces also greatly improves light transmission. OPTIMIZED FOR AUTOFOCUS By utilizing a specially developed algorithm in the optimization process, the SMC renders superior image quality over the full focusing range of the camera lens (which becomes ~50 to ~100 mm in front of the SMC). Also benefitting from the high brightness and contrast of the image, the autofocus system of the camera usually works acceptably well within this range. AMPLE WORKING DISTANCE Even at the maximum 2.3X magnification, there is still more than 50mm of working distance between the front element and the subject with 100/105mm macro lenses. This working distance is crucial when capturing behavior with skittish subjects. RESOLUTION High resolution was a primary design goal of the SMC project. This has been achieved using computer aided optimization and high grade optical glasses with unique refractive and dispersion properties. Images taken with this new system exhibit very high resolution and quality. Results have exceeded expectations, and these images rival the quality of the macro lens in air. SMOOTH BOKEH The Converter retains the optical properties of the macro lens for the whole system underwater, resulting in a blurred (out of focus) background that has a pleasing smoothness and creamy look, without the normal purple and green fringing. AVOIDING DIFFRACTION Due to the overall superior optical performance of the SMC it is possible to shoot larger apertures with excellent image quality. This avoids reaching the diffraction limit of high resolution sensors, and allows selective focus effects with narrow depth of field in super macro images.

€550.00*

M67 Flip Holder for M67 Ports

This flip holder allows for use of one M67 wet-mate optic like the SMC-1 or CMC-1 on M67 Macro Ports.

€285.00*

Focus Gear for Sony FE 90 mm F2.8 Macro G OSS

Focus gears allow access to the mechanical focus function of many lenses. Use of these gears may require specific port extensions and may not be available for all housings and lenses. This focus gear is specific for the Sony FE 90mm F2.8 Macro G OSS lens. Sony A7R II & Sony FE 90mm f/2.8G Macro Lens Showreel from Nauticam on Vimeo.

€215.00*

on stock

Macro Port 105 (N100)

Macro Port 105 designed for housings supporting the N100 Port System. The front of the port has integrated 67mm threads for accessories. This port is designed to support the Sony SEL90M28G FE 90mm F2.8 Macro G OSS lens on the A7II/A9 systems but may support other lenses as well. Check Port Chart for all supported lenses.

€485.00*

on stock

M14 Vacuum Valve II

Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*

on stock

Full Frame Angle Viewinder 32°/ 1:1

The next generation Nauticam Full Angle Straight Viewfinder is the perfect addition to your housing as it provides a bright, clear and undistorted 1:1 image of the camera’s viewfinder and is essential for precise focusing and artistic composition. This viewfinder is also available in an 0.8:1 version that can also accommodate viewing of the entire image field on cameras with larger EVFs such as the Sony A1. The Full Frame Angle Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature. The viewfinder can also be rotated when using the camera in a portrait orientation. INTRODUCING NAUTICAM FULL FRAME ANGLE VIEWFINDER 32°/ 1:1 For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings. In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Straight Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy. 32º/1:1 VS. 42º/0.8:1 Because different photographers have different needs and priorities, Nauticam offers the Full Frame Angle Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry. For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data. HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder. as well as the simple installation and removal that takes only seconds. TOOL FREE INSTALLATION The Nauticam Full Frame Angle Viewfinder can be installed in seconds without any tools. The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings. The viewfinder can also be rotated when using the camera in a portrait orientation. Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at. <iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

€1,590.00*

Tripod

on stock

Mounting Ball Set for Tripod

This kit allows for the secure mounting of industry standard 1" ball mounts directly onto the NA-A9 housing that provides a low-profile attachment point for tripod legs or accessory light arms. Compatible with Nauticam Housings: NA-A9 NA-A7RIII NA-BMPCC NA-XT3 NA-RIV NA-Z50 NA-XT5

€77.00*

HDMI 1.4

HDMI (D-A) cable in 180mm length (for connection from HDMI bulkhead to camera)

This is an HDMI cable for use inside supported housings to convert Type D to Type A HDMI connections with a length of 220mm.

€83.00*

Underwater Monitor WED-7 Pro

The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*

on stock

WED-5 Underwater Monitor

5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*

Ball heads

M5 Strobe Mounting Ball for Housing

Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€27.00*

Flash Trigger

on stock

Mini Flash Trigger for Sony

Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the A7 camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself.

€285.00*

N5 bulkhead with universal hotshoe (M14)

This is an M14 mount Nikonos 5-pin bulkhead with universal hotshoe connection (x and ground connection only).

€150.00*

on stock

Adapter for fibre-optic cable to Nauticam

Adapter for connecting fibre optic cables with plugs (Sea&Sea standard) to Nauticam underwater housings.

€6.50*

on stock

s-TURTLE MANUAL trigger for SONY systems

A reliable Manual trigger for underwater photographers that works via fiber optic cable or sync cord. s-TURTLE MANUAL This Manual trigger was developed for Sony DSLR and MILC camera systems. The s-TURTLE MANUAL is the perfect choice for the demanding underwater photographer who needs an easy to use, affordable, and reliable trigger that works with the most popular underwater strobes (Inon, Ikelite, Sea&Sea, Subtronic, OneUW, Retra, Backscatter miniflash etc). Features: 1st or 2nd curtain, HSS mode (Switch on the "WL mode"). The Internal charging system works via a USB AB connector. Compatible camera models are the SONY DSLR and Mirrorless cameras. Compatible strobes (as of 01.09.2020.): Ikelite DS160 Inon Z240/Z330 Sea&Sea YS-250, YS-D1, YS-D2, D2J YS-D3, YS-110a, Subtronic Pro 160, Pro 270 One UW Retra old and new models. Retra PRO (HSS mode available in manual "WL" mode!) The S-TURTLE MANUAL is a user-friendly trigger: you simply connect the LED or the sync cord connector and you can take hundreds of shots without charging. The TURTLE MANUAL triggers fit into the most popular underwater housings (tested with Nauticam, Subal, Hugyfot, Isotta, Ikelite, Seacam, Saltedline models). If you want to connect your strobe via fiber optic cable we recommend using multicore cable! (Please write Us which kind of connection do you use. We also recommend writing us what kind of underwater strobe will you control with the TURTLE trigger so we can be sure you got a product that fulfills your needs.) There is also a USB cable in the package for charging.

€280.00*

s-Turtle Smart 2 TTL-Trigger for Sony

A reliable TTL and Manual trigger which works via fiber optic cable or sync cord. s-TURTLE 2 SMART underwater photo trigger for Sony camera models This underwater TTL trigger was developed for Sony High-end mirrorless camera systems. The s-TURTLE SMART underwater flash trigger is the perfect choice for the demanding underwater photographer who needs a reliable TTL converter that works with the most popular underwater strobes (Inon, Ikelite, Sea&Sea). Our company was the first on the market that offered a TTL trigger for the popular Sony camera models, and our proven product has some unique features. The s-TURTLE 2 SMART triggers for Sony underwater setups fit into the most popular underwater housings (tested with Nauticam, Subal, Seafrogs, Hugyfot models). Compatible Sony camera models in TTL/MANUAL mode: A72, A7R2, A7S2 , A73, A7R3, A7S3, A7R4, A74, A1, A7C, 6X00 series (HI+ continuous shooting is available in A74, A1, A7R5, A92 tested) Compatible strobes (as of 01.2022.): Ikelite DS160, Inon Z240/Z330, Sea&Sea YS-D1, YS-D3 ,Subtronic 270, Retra PRO X and Backscatter Mini Flash 2 (HSS mode available in manual (WL)mode!) As we regularly add new models please download and run the software before purchasing, to check the compatible camera and strobe types. The s-TURTLE 2 SMART is a state-of-the-art user-friendly TTL trigger that can be upgraded by the user via the USB port. It allows you to set up the strobe characteristics, and some special features. You can also check the settings or the battery level. The user can set up the strobe model and can choose which mode will be used in "WL" mode. "WL" mode is a special manual mode where the trigger doesn't make preflash! It's possible to set this in the camera menu, so the user can easily change the trigger mode from manual/TTL or back under the water. The WL mode can be configured to: Manual mode with First curtain Manual mode with Second curtain. A special strobe mode (multiflashing expo, more details in manual.) The Internal charging system works via USB AB connector via the USB cable which is in the box. The package contains the s-TURTLE 2 SMART TTL trigger for Sony cameras and the LED panel (with the new, brighter 150 cd LEDs) or the special cable for sync cord connection. If you want to connect your strobe via fiber optic cable we recommend using multicore (613)cable! (Please write Us about which kind of connection you use. We also recommend writing us about what kind of underwater strobe will you control with the TURTLE trigger so we can set up the unit you ordered.) The setup software for PC is downloadable from our website: you can find it on the right side of the page. Mac version is coming soon! There is also a USB cable in the package for charging and setup.

€365.00*

Spare parts

on stock

M14 plug for housing (with o-ring)

Plug for M14 bulkhead on underwater housings.

€23.00*

on stock

Housing o-ring 90120

Housing O-ring for the following Nauticam housings NA-D90 NA-D7000 NA-7000V NA-60D NA-600D NA-650D NA-A7RIV NA-Z50 NA-A1 NA-A7SIII

€22.00*

on stock

Spare O-Rings for 1 inch ballheads

Spare O-rings for 1-inch ball heads in the popular Nauticam blue.

€16.00*

Sony A7 IV Underwater Housing by Nauticam

THE SONY ALPHA 7 Mark IV Camera

Camera Specs

AUTOFOCUS

4K VIDEO

IMPROVED CONTROLS

NAUTICAM NA-A7IV UNDERWATER HOUSING

MISSION CONTROL

HDMI 2.0

PREMIUM PROFESSIONAL OPTICS

VACUUM CHECK AND LEAK DETECTION

STROBE TRIGGERING

Login

Ask a question

Previously asked questions