+49 2501 9292419
shop@panoceanphoto.com
Shop in Münster
Go to homepage
Wishlist
Shopping cart €0.00*

Nikon Z7 II / Z6 II Underwater Housing by Isotta

Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta
Nikon Z7 II / Z6 II Underwater Housing by Isotta

€3,290.00*

Prices incl. VAT plus shipping costs

Free shipping

Delivery time: 17 days*

Product number: AS3322

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater.

The Nikon Z7 II / Z6 II Underwater Housing by Isotta

The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6 and Nikon Z7 II / Z6 II. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible.

ONE HAND OPEN/CLOSE

The Isotta underwater housing for Nikon Z7 II / 6 II is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing.

PORTS AND EXTENSION RING

A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 II / Z6 II. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.

CONSTRUCTION AND SAFETY

Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum.

Controls

  • ON/OFF of Nikon Z7 II / Z6 II
  • Ergonomic camera focusing and shutter button for an easy use with gloves
  • Lens release
  • Rear control panel
  • Upper control panel
  • All controls are available on the housing

Highlights

  • Ergonomic side handles, adjustable (via optional accessory)
  • Two fiber optic connections
  • Two optional electrical sync cord bulkheads
  • Back housing completely detachable from the front housing
  • Dedicated REC lever and ISO button
  • Tray with lock for an easy fitting of the camera
  • Single-hand closing knob for back housing
  • Three M16 hole for installation of accessories, e.g. vacuum valves or monitors
  • Aluminum buttons and dials with engraved symbols identical to camera controls
  • All camera controls are external
  • Wide back display viewfinder glass
  • Optical viewfinder
  • Double O-Ring seals on all buttons and removable parts
  • Moisture alarm with LED and an acoustic warning signal (replaceable battery)
  • Removable port - 120mm bayonet
  • Ports security latch to prevent accidental opening
  • Wide, rubber covered feet for solid footing
  • One M8 hole located on upper side of the housing for various accessories such as focus lights
  • Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods
  • External viewfinders can be mounted, INON X-2 compatible
Weiterlesen
Technical data

  • Red color anodized aluminum body

  • Depth rated to 100 metres

  • Weight: 2100 grams (with handles)

  • Size in mm: 282 W. x 126 D. x 185 H (with handles)

Scope of delivery

  • Nikon Z 7 / Z6 and Nikon Z7 II / Z6 II Underwater Housing by Isotta

  • Front lip

  • Spare O-Ring kit

  • Silicone Grease 15gr / 0,5 oz


Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
on stock
Top Handle
Top Handle
This tray applied on top of the housing and fixed to the handles, allows the use of optional accessories with the Isotta's DSLR and Mirrorless housings.

€115.00*
on stock
45° Viewfinder Unit II for X-2
45° Viewfinder Unit II for X-2
Enables to see all finder image without vignetting even through a mask by extending eye point without changing finder image size (1.0x). 45º angled eyepiece benefits you to shoot a low angle subject like a goby on sand area etc. Also the eyepiece rotates 360º supporting comfortable vertical low angle shot. Optically designed to suit to an EVF: electrical viewfinder of a full size DSLR camera providing wider viewing angle having minimal vignetting or blurred part even at corners. The viewfinder provides same magnification as camera’s viewfinder (1.0x) and extends its eye-point at 60 mm/2.4 in. not to have vignetting even through a mask. High quality optical components are carefully housed in a small, light yet durable body which is made from corrosion resistant aluminum alloy and FRP: fiber reinforced plastic.

€550.00*
Custom engraving
Custom engraving
Give your underwater housing from Isotta your own personal touch and have your name laser-engraved into the signal red housing.

€29.00*
Vacuum System
Vacuum System
Easy and intuitive way to use ?Lights system for the passages of the vacuum Closing cap secured to the Vacuum bulkhead ?One hand vacuum pump Release of internal pressure by traction Electronics with pressure detection System

€230.00*

Spare parts

O-Ring-Set for Nikon Z 7/6 (I+II)
O-Ring-Set for Nikon Z 7/6 (I+II)
Spare O-rings

€28.00*

Similar products

Nikon Z7II / Z6II Underwater Housing by Nauticam
Nikon Z7II / Z6II Underwater Housing by Nauticam
The Z 7II and Z 6II, Nikon's next generation full-frame mirrorless cameras, offer underwater shooters the same legendary Nikon sensors with improved autofocus and continuous shooting speed performance. The NA-Z7II supports both the Z 7II and Z 6II models and features the larger-bore M28 bulkhead that supports HDMI 2.0 connections needed for the Atomos Ninja V Recorder/Monitor. THE NIKON Z 6II AND Z 7II CAMERAS For many full-frame Nikon shooters the appeal of a mirrorless camera had been tempered by the thought of having to invest in and master a new system by moving to another ecosystem such as Sony. For those awaiting a mirrorless system that utilized Nikon imaging technology and ergonomics, the wait is over. The Z 6II and Z 7II cameras feature an identical body, differing only in their feature sets, an ideal feature when it comes to housing the camera for underwater use.  Each camera also features dual EXPEED 6 image processor to significantly improve autofocus and continuous speed shooting.   Both camera bodies are built around Nikon's Z-mount. With an incredibly wide 55mm mount diameter (17% larger than F-mount) and very short flange distance, the Z-mount is able to offer a maximum aperture of F0.95. While the current range of Z-mount lenses continues to grow, almost the entire line of F-mount lenses is usable with the optional Nikon FTZ Adapter. When using the adapter, even non VR lenses benefit from the camera's in-body stabilization. VR and Z-Mount lenses receive 5-axis stabilization whereas non-VR F-mount lenses have access to 3-axis stabilization. There is also a dedicated e-VR (electronic VR) that combines optical and electronic stabilization for video shooting. Both the Z 6II and Z 7II will be able to capture internal UHD 4K at 60fps or 1080 HD at up to 120fps.  The Z 6II will be able to record 4K/60P early in 2021 through an expected firmware update.  In addition to N-Log, both cameras also feature HLG (hybrid-log gamma for HDR) which work in 10-bit 4:2:2 over HDMI 2.0 to an external recorder such as the Ninja V.   The OLED electronic viewfinder (EVF) of both the Z 6II and Z 7II gives 100% frame coverage at Quad-VGA (3.69M dot) resolution. When triggering external flashes, both cameras feature a 1/200 X-sync shutter speed. THE NIKON Z 7II CAMERA The Z 7II features a high resolution 45.7MP FX-format sensor that can shoot at up to 10FPS. The Z 7II features a wide ISO range of 64-25,600. Autofocus is achieved with 493 on-sensor AF points that cover 90% of the frame and the camera intelligently switches between contrast-detection and phase-detection points to achieve accurate focus regardless of light conditions. KEY CAMERA SPECS: 45.7MP FX Format Sensor with no OLPF 10 FPS continuous shooting 64-25,600 ISO Range UHD 4K 60p recording with 1.08x crop 10bit UHD 4K N-log output via HDMI with start/stop support 5-axis VR stabilization (with Z lenses) 3.69M-dot EVF, 3.2" 2.1M-dot rear screen -3EV focusing with F2.0 lens 1 CFExpress / XQD card slot, 1 UHS-II SD card slot THE NIKON Z 6II CAMERA The Z 6II is equipped with a 24.5MP FX-format sensor capable of up to 14FPS continuous shooting with an ISO range of 100-51,200. Video is currently recorded internally at up to UHD 4K 30p.  UHD 4K 60p with a 1.6x crop will be available in early 2021 through a firmware update. 273 on-sensor focus points cover 90% of the fame and the Z 6II intelligently switches between contrast-detection and phase-detection points to assure accurate autofocus. KEY CAMERA SPECS: 24.5MP FX Format Sensor with OLPF 14 FPS continuous shooting 100-51,200 ISO Range Full Sensor UHD 4K 30p  UHD 4K 60p recording with 1.6x crop (firmware update early 2021) 10bit N-log UHD 4K output via HDMI with start/stop support 5-axis VR stabilization (with Z-mount lenses) 3.6m-Dot OLED Electronic Viewfinder Two card slots (1x CFexpress/XQD, 1x UHS-II SD) THE NAUTICAM NA-Z7II UNDERWATER HOUSING The NA-Z7II underwater housing follows suit with Nauticam's drive for innovation. Both the Nikon Z 6II and Z 7II present shooters with the ability to use both the available legacy F Mount lenses via the FTZ adapter in addition to their native Z Mount optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-Z7II into the N120 port system.  This is critical as the new Z mount lenses are being phased in over the next few years. The Nauticam NA-Z7II housing features two lens release buttons that correspond to either F or Z mount lenses. When switching between F and Z mount lenses, the camera must be removed from the housing to remove the adapter. When working within either the F or Z mount system use the appropriate lens release button to switch lenses without having to remove the camera from the housing. A vacuum system reset switch is located below the tray as well so there is no need to open the rear of the housing during lens or port changes. The NA-Z7II is part of the N120 port system which allows for full support of Nikon F mount lenses with the same ports needed for their application on Nikon SLR housings. As more Z mount lenses become available Nauticam will add supported configurations. INTELLIGENT CONTROL PLACEMENT Nauticam engineers are obsessed with functionality and this is evident in the location of essential controls. Regardless of where the control is located on the camera, the Nauticam housing puts them where you need them to be underwater. For those switching between photo and video modes, an easily reachable switch is located on the right rear of the housing. The right side double thumb lever, easily reached from the right handle features access to the AF-on and Record buttons respectively. Between the double thumb lever and the multi-stage shutter release is an ISO lever allowing quick changes to sensitivity. The left double thumb lever accesses the DISP and Playback controls. The Zoom In and Zoom Out controls, located on the right rear of the camera body is relocated to the left side of the housing to a location more familiar to Nauticam housing users. The switch that allows for switching between the LCD display and the EVF, a crucial and much used control with mirrorless systems is located close to the left handle within easy reach. Front and rear control dials are readily accessible by the familiar large knurled dials at the right handle. The ergonomic housing handles are rubberized and feature stainless steel stiffening brackets to ensure a stable platform when using large strobes or video lights attached to the pre-installed 1" mounting balls. FLASH TRIGGERING The NA-Z7II comes with Nauticam's self powered manual flash trigger preinstalled. The flash trigger plugs into the hot-shoe of the camera and uses LED lights recessed into each of the two optical bulkheads to trigger supported underwater flashes when used with the correct fiber optic connection. The flash trigger is powered by coin cell batteries that provide thousands of flashes per battery. The flash trigger can be upgraded to support TTL triggering (PN 26308 TTL Converter for Nikon). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-Z7II as standard equipment. Combined with an accessory M16 vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-Z7II uses the same N120 Port System as the previous NA-Z7 which makes for a seamless transition for those upgrading to the "II." While this system provides exceptional optical-glass and flat port solutions for a wide variety of F and Z Mount lenses, the real power of the Z 6II and Z 7II can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6. The SMC-1 and SMC-2 macro wet-optics, when used with the Nikon 105mm f/2.8G VR macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 105mm lens itself can achieve in air without a magnifier.

€4,425.00*
Nikon Z7II/Z6II/Z7/Z6 Underwater Housing by Sea&Sea
Nikon Z7II/Z6II/Z7/Z6 Underwater Housing by Sea&Sea
State-of-the-art housing for the full-frame mirrorless Nikon Z7II/Z6II/Z7/Z6 camera. Compact, compatible with the Optical YS Converter and ergonomically designed. Compact design The housing of the Z7/6 camera, as well as the Z7/6 II, takes advantage of the compact design and light weight and has been designed accordingly to enhance these features. Compared to the MDX-850 SLR camera body, the MDX-Z7/6 is 100 grams lighter on land. Ports and gears for the MDX series SLR housings can be used. An optional Optical YS Converter which converts the camera’s hot-shoe TTL signal into an LED light signal is compatible with the housing. Manual strobe photography is also possible. Designed for both F mount lenses with the mount adapter FTZ and Z mount lenses. The Focus/Zoom dial has two gears, one for F-mount lenses with the mount adapter FTZ and the other for Z mount lenses. The MDX-Z7 has been designed to take into consideration various Z mount lenses which will soon be available.   Entwickelt für F-Mount-Objektive mit Adapter FTZ und Z-Mount-Objektive. Das Fokus/Zoom-Drehrad hat zwei Zahnräder, eines für F-Mount-Objektive mit dem Anschlussadapter FTZ und das andere für Z-Mount-Objektive. Das MDX-Z7 wurde für die Berücksichtigung verschiedener Z-Mount-Objektive entwickelt, die in Kürze erhältlich sein werden. The camera’s upper control panel can be seen. A window for the camera’s upper control panel is also incorporated. As brightness of the camera’s upper control panel has increased, the visibility is now greatly improved. MDX-Z7? Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as Optical Viewfinder 0.66x,and 0.8x can be used. ?Some vignetting occurs.When the VF45 and VF180 1.2x is mounted on housing, the  corners of the camera's viewfinder cannot be viewed due to vignetting.  Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only). Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Equipped with under guard to protect from scrach. Compatible with Z7 / Z6 cameras by using the included parts 

€4,195.00*

Ball heads

T-Socket for arms
T-Socket for arms
T socket for arms to the tray.

€25.00*
Ball Joint 45° angle for T-Socket
Ball Joint 45° angle for T-Socket
Ball joint of 25mm with 45° front angle mount.

€42.50*
on stock
Ball Joint with Plate
Ball Joint with Plate
Ball joint of 25mm with plate and 1/4W thread.

€28.00*
on stock
Ball head with M8 Screw
Ball head with M8 Screw
Ball joint of diam. 25mm threaded M8 with locking system.

€28.00*
Ball Joint adaptor (90° angle)
Ball Joint adaptor (90° angle)
Ball joint of 25mm with 90° angle mount.

€37.00*

Flash Trigger

Manual flash trigger
Manual flash trigger
Manual flash trigger for mirrorless and SLR cameras in the Isotta underwater housing. This is installed directly when ordered together with an underwater housing from Isotta.

€280.00*
on stock
TTL Converter for NIKON in older Isotta housings
TTL Converter for NIKON in older Isotta housings
Optoelectronic TTL Converter for NIKON for ISOTTA housings of former years, including 2 pcs Optical Bulkheads with built-in LED. Compatible underwater strobes: Inon Z-330 / Z-240, Sea&Sea YS-D1 / YS-D3 Mark II / YS-250, Ikelite DS-230 / DS-162 / DS161 /, DS160 / DS-125, Subtronic Pro-270 / Pro-160, Retra Pro (including HSS). Two optional ISOTTA electric bulkheads are supported as well, onboard sockets have ISOTTA style pinout. This TTL board is purposed for installation instead of Isotta special shape commutation board. Such type of Isotta housings has a special curved shape milled recess in metal, the same curved shape has the TTL-converter board. Check your housing regarding such installation version before TTL system purchasing.

€765.00*
TTL flash trigger for Nikon
TTL flash trigger for Nikon
TTL flash trigger for Nikon mirrorless and SLR cameras in Isotta underwater housing. This is installed directly when ordered together with an underwater housing from Isotta.

€360.00*