Full Frame Angle Viewinder 40°/ 0.8:1
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Product number:
NA32214
The next generation Nauticam Full Frame Angle Viewfinder is the perfect addition to housings for cameras with the latest generation of larger Electronic Viewfinders such as the Sony A1 and A7SII as it provides a bright, clear and undistorted image of the camera’s viewfinder with it's 0.8:1 magnification. This enhanced viewfinder is essential for precise focusing and artistic composition. This viewfinder is also available in a 1:1 version that can also accommodate viewing of the entire image field on cameras with standard EVFs such as most DSLR and Mirrorless cameras.
The Full Frame Angle Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature. The viewfinder can also be rotated when using the camera in a portrait orientation.
INTRODUCING NAUTICAM FULL FRAME ANGLE VIEWFINDER 40°/ 0.8:1
For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings.
In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Angle Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy.
32º/1:1 VS. 42º/0.8:1
Because different photographers have different needs and priorities, Nauticam offers the Full Frame Angle Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry.
For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data.
HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT
The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder. as well as the simple installation and removal that takes only seconds.
TOOL FREE INSTALLATION
The Nauticam Full Frame Angle Viewfinder can be installed in seconds without any tools. The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings. The viewfinder can also be rotated to allow the camera to be used in portrait orientation.
Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at.
<iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
| Body Material: | aluminum |
|---|
Technical data
Compatible with DSLR/FF-MIL (except NA-A7C, FX3)
Scope of delivery
Full Frame Angle Viewinder 40°/ 0.8:1 by Nauticam
Login
There aren't any asked questions yet.
Similar products
Full Frame Straight Viewfinder 32°/ 1:1
€1,720.00*
The next generation Nauticam Full Frame Straight Viewfinder is the perfect addition to your housing as it provides a bright, clear and undistorted 1:1 image of the camera’s viewfinder and is essential for precise focusing and artistic composition. This viewfinder is also available in an 0.8:1 version that can also accommodate viewing of the entire image field on cameras with larger EVFs such as the Sony A1.
The Full Frame Straight Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature.
INTRODUCING NAUTICAM FULL FRAME STRAIGHT VIEWFINDER 32°/ 1:1
For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings.
In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Straight Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy.
32º/1:1 VS. 40º/0.8:1
Because different photographers have different needs and priorities, Nauticam offers the Full Frame Straight Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry.
For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data.
HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT
The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder. as well as the simple installation and removal that takes only seconds.
TOOL FREE INSTALLATION
The Nauticam Full Frame Straight Viewfinder can be installed in seconds without any tools. The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings.
Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at.
on stock
Full Frame Angle Viewinder 32°/ 1:1
€1,590.00*
The next generation Nauticam Full Angle Straight Viewfinder is the perfect addition to your housing as it provides a bright, clear and undistorted 1:1 image of the camera’s viewfinder and is essential for precise focusing and artistic composition. This viewfinder is also available in an 0.8:1 version that can also accommodate viewing of the entire image field on cameras with larger EVFs such as the Sony A1.
The Full Frame Angle Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature. The viewfinder can also be rotated when using the camera in a portrait orientation.
INTRODUCING NAUTICAM FULL FRAME ANGLE VIEWFINDER 32°/ 1:1
For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings.
In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Straight Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy.
32º/1:1 VS. 42º/0.8:1
Because different photographers have different needs and priorities, Nauticam offers the Full Frame Angle Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry.
For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data.
HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT
The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder. as well as the simple installation and removal that takes only seconds.
TOOL FREE INSTALLATION
The Nauticam Full Frame Angle Viewfinder can be installed in seconds without any tools. The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings. The viewfinder can also be rotated when using the camera in a portrait orientation.
Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at.
<iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Full Frame Straight Viewfinder 40°/ 0.8:1
€1,720.00*
The next generation Nauticam Full Frame Straight Viewfinder 40º/0.8:1 is the perfect addition to housings for cameras with the latest generation of larger Electronic Viewfinders (EVFs) such as the Sony A1 and A7SII as it provides a bright, clear and undistorted image of the camera’s viewfinder with it's 0.8:1 magnification. This enhanced viewfinder is essential for precise focusing and artistic composition. This viewfinder is also available in a 1:1 version whose higher level of magnification can accommodate viewing of the entire image field on cameras with standard mirrorless camera EVFs and DSLR optical viewfinders.
The Full Frame Straight Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature.
INTRODUCING NAUTICAM FULL FRAME STRAIGHT VIEWFINDER 40°/ 0.8:1
For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings.
In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Straight Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy.
32º/1:1 VS. 42º/0.8:1
Because different photographers have different needs and priorities, Nauticam offers the Full Frame Straight Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry.
For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data.
HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT
The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder. as well as the simple installation and removal that takes only seconds.
TOOL FREE INSTALLATION
The Nauticam Full Frame Straight Viewfinder can be installed in seconds without any tools. The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings.
Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at.
<iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Sony A7S III Underwater Housing by Nauticam
€3,775.00*
The long awaited Sony a7S III brings high frame-rate 4K video with incredible low-light sensitivity to the A7 full frame mirrorless lineup. The video-centric follow up to the a7S II adds internal 10-bit 4:2:2 4K capture at up to 120fps while building on the a7S II's already segment leading low-light capabilities. Upgrades also extend to the 9.44M dot OLED viewfinder, 759-point phase detection autofocus and reduced rolling shutter.
THE SONY ALPHA A7S III CAMERA
Built around a new 12.1MP Exmor RS BSI CMOS sensor coupled with a BIONZ XR image processor, the a7S III is a powerful video oriented mirrorless full-frame camera. The long awaited follow up to the a7 SII, which set the standard for low-light capabilities in the full-frame mirrorless segment, brings not only improvements to that key spec but also a host of other notable upgrades.
Key Camera Specs
12.1MP Exmor RS BSI CMOS sensor
ISO sensitivity of 40-409600
4K Video Capture at up to 120fps
Internal recording at up to 10-bit 4:2:2 color sampling
No recording time limit
16-bit raw video output over HDMI-A
759-Point phase-detection autofocus with 92% coverage
Dual UHS-II card slots
S-Log2/3 or HLG/BT.2020 gamma curves
5.5 Stop IBIS
The new sensor features 759 phase-detection and 425 contrast-detection autofocus points that cover approximately 92% of the image area and promises sensitivity down to -6 EV. Customizable seven-step AF transition speed and five-step AF subject shift sensitivity allows for fine tuning of the autofocus system. As expected, ISO sensitivity is expanded to ISO 40-409600.
A 5-axis in-body stabilization system provides 5.5 stops of camera movement, even with adapted lenses, which combined with the 120fps frame-rates help deliver ultra-smooth handheld video.
Video can be recorded in either All-I XAVC S-I at up to 600Mbps or XAVC HS which uses H.265 compression for smaller file sizes. Internal 4K recording uses 1:1 pixel readout at up to 120fps with 10-bit 4:2:2 sampling. The a7S III offers extensive color customization including the S-Log2 and S-Log3 gamma curves that can deliver 15+ stops of dynamic range. HLG and BT.2020 color spaces are also available. Recording time limits have been removed and improved heat dissipation has been added to the camera body's design. Internal recording is to UHS-II rated dual card slots that support CFexpress Type A or SD cards. External recording of 16-bit raw video is possible via the full size HDMI port when used with compatible Recorders.
NAUTICAM NA-A7SIII UNDERWATER HOUSING
Nauticam is the leader in producing intuitively designed precision manufactured aluminum underwater housings for the Sony a7 camera line and continues to innovate with the new NA-A7SIII housing.
The NA-A7SIII is designed to maximize the video-centric capabilities of the Sony a7S III camera while maintaining it's strong still image potential. The NA-A7SIII is built around the N100 port system that is shared with the rest of the Nauticam housing lineup for the Sony full-frame mirrorless a7 series. The N100 system includes a dull range of both macro and wide-angle ports as well as delivering access to the lineup of Nauticam's professional wet optics that are optimized for underwater imaging such as the WACP-1/2 and the SMC-1/2 lenses. These optics deliver unparalleled image quality underwater expanding what is possible with the powerful a7S III camera.
HDMI Output
The a7S III can output 16-bit raw video signal over HDMI and the NA-A7SIII features an M24 bulkhead that supports the HDMI 2.0 standard. This allows the NA-A7SIII to be used in conjunction with either a recording monitor such as the Atomos Ninja V in the NA-NinjaV housing via HDMI 2.0 or standalone monitors such as the SmallHD 502 Bright in the NA-502B housings via HDMI 1.4.
Optional Magnifying Viewfinder
The a7S III camera features an updated 9.44M-dot OLED viewfinder with a 120fps refresh rate. Nauticam's line of optional magnifying viewfinders, available in both an angled 45º (32203) or straight 180º (NA32201) configuration provide enhanced viewing ability as well as a dioptric adjustment knob that can used underwater. Installation can be achieved without tools in less than a minute.
Mission Control
Nauticam engineer's Mission Control design philosophy means controls are intuitively placed where they are needed most regardless of their position on the camera. The NA-A7SIII features a double thumb lever within easy reach of the right handle that triggers the AF-ON and RECORD controls of the camera. A thumb lever on the left side toggles the PLAYBACK button. The back panel of the housing provides access to all other rear camera controls including a multidirectional pad.
Vacuum Check and Leak Detection System
The Nauticam vacuum check and leak detection system is shipped with NA-A7SIII as standard equipment. With the addition of the optional M14 Vacuum Valve (NA25624) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
Sony Alpha 1 Underwater Housing by Nauticam
€4,185.00*
Aimed squarely at professional image makers, the Sony Alpha 1 provides a 50MP sensor capable of 30fps burst shooting and 8K video. It features Sony's latest autofocus system, an incredible 9.44M-dot EVF and a 1/400 sec flash sync speed with the mechanical shutter. Whether you are interested in still photos or video, this camera can do just about anything you need it to.
SONY ALPHA 1 CAMERA
The Sony a1 is the company's flagship full-frame interchangeable lens camera. Designed around the new 50.1MP Exmor RS BSI CMOS sensor and the BIONZ XR processor, the a1 is truly a camera which can do it all. It's 759 point Fast Hybrid Autofocus system offers advanced subject tracking and real-time eye autofocus on both humans and animals. The optimized processing within the a1 allows it to achieve 30fps continuous shooting at full resolution along with 8K 30p and 4K 120p 10-bit video recording.
8K 30p recording is possible using the full width of the sensor while 4K 120p uses a 10% crop. Through a Super 35 crop, oversampled 4K recording is also achievable, via an 5.8K capture area. For shooters who demand more post production flexibility, 4.3K raw 16-bit recording is possible to an external recorder using the camera's full size HDMI A port.
The a1 has also received major upgrades compared to its predecessors, including a 9.44M-dot OLED EVF with a 240fps refresh rate. The newly designed shutter allows for flash sync speeds up to 1/400 sec and the body includes dual card slots supporting either CFexpress Type A or SD UHS-II memory cards.
SONY ALPHA A1 KEY SPECIFICATIONS
50.1MP Exmor RS BSI CMOS full-frame sensor
759 point Fast Hybrid AF with tracking
30 fps burst shooting with electronic shutter
9.44M dot OLED viewfinder with 240fps refresh rate
8K 30p and 4K 120p video in 10-bit
4.3K 16-bit Raw video output
Dual UHS-II / CFexpress Type A card slots
THE NAUTICAM NA-a1 UNDERWATER HOUSING
Nauticam has supported the Sony Alpha full-frame line since the original a7 with professional grade aluminum housings that offer intuitive access to all the controls and functions of the cameras. As the cameras have evolved, so have the Nauticam housings. The NA-a1 underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-a1 continues this tradition.
Integrated DSLR-housing styled handles with ergonomic rubberized grips and stainless steel stiffening brackets add stability and accessory mounting points. The NA-a1 also features dual rear thumb-levers that are easily reached from the handle that access three of the most-used controls on the rear of the camera. The right lever actuates the AF-ON and RECORD buttons while the left lever is mapped to the PLAY button.
Atop the housing on the left side are controls in the form of a MODE dial and FOCUS mode lever. The C1, C2 buttons as well as the EV compensation dial also have direct access from the top of the housing. The C3, which is typically assigned to control switching between the EVF and the LCD screen is easily reachable on the rear of the housing from the left handle.
ACCESSORY PORTS
The NA-a1 has both an M24 port at the front of the housing for both HDMI 1.4 and HDMI 2.0 connectivity (see sidebar for recommendations) as well as an M14 at the rear for the optional Vacuum Valve (25624). The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system. This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
PREMIUM PROFESSIONAL OPTICS
Nauticam's wide range of ports and in-house corrective optics are the perfect compliment to the NA-a1's inherent flexibility. Built around the N100 Port System, the NA-a1 supports a wide variety of Sony FE mount lenses, as well as EF mount lenses via adapters. In addition, there are several options available to use the groundbreaking WACP and WACP-2 wide-angle corrective lenses as well as the more compact and in-water removable WWL-1B.
For example, With the Sony SEL1635GM FE 16-35mm F2.8 GM, the WACP 2 brings the original 105º field-of-view to an impressive 128º with sharper corners, an ~0" minimum focus distance and a more natural looking image than would be provided by a standard glass dome port.
FLASH TRIGGERING
Both fiber-optic and electrical strobe triggering options are available. The Nauticam Universal Fiber Optical cables attach to the built-in bulkheads atop the housing and feature modular connections for both Sea&Sea-style bushings and INON threaded connections. Triggering is achieved using the optional Nauticam Mini Flash Trigger for Sony (26302) which uses LEDs powered by an on-board coin-cell battery to generate a manual signal that is transmitter via the optical cables to compatible strobes.
Fujifilm GFX 100S Underwater Housing by Nauticam
€11,485.00*
With the GFX100S, Fujifilm has transferred the power of the larger medium-format GFX100 into a smaller camera body that is more in line with a standard mirrorless full-frame cameras while also making various performance improvements. The GFX100S maintains the 102MP BSI CMOS sensor yet features a smaller and lighter in-body image stabilization system, autofocus points that cover virtually 100% of the image frame and is powered by the X-Processor 4 chip.
THE FUJIFILM GFX100S CAMERA
Fujifilm's mirrorless medium-format (44mm x33mm sensor size) GFX100S camera packs the expected large 102MP pixel count into a camera body more in-line with a full-frame mirrorless system. Even while reducing overall camera size, the GFX100S receives a more capable in-body image stabilization (IBIS) system as well as supercharged autofocus driven by the latest X-Processor 4 chip.
Key Camera Specs
102MP BSI CMOS Sensor (44mm x 33mm)
IBIS rated at 6EV
4K 30p video at up to 400Mbps with full-width readout
Uncompressed 10-bit 4:2:2 or 16-but raw video output over HDMI
Dual-gain ISO
Up to 16-bit uncompressed raw files
The GF-mount lens lineup continues to grow, with more and more lenses meeting the criteria underwater image-makers are after. Paired with the camera's medium-format 102MP sensor, which is 68% larger than a full-frame sensor, the resulting images have lower noise and greater dynamic range for a given exposure value. Users can choose to record up to 16-bit uncompressed raw image files, preserving the maximum amount of sensor data for post-processing.
The GFX100S features the latest X-Processor 4 chip which powers the improved autofocus system that covers virtually 100% of the image area. The camera's large built-in OLED viewfinder has 3.69M-dot resolution at 0.77x magnifications and features variable refresh rates and resolution to enhance battery life.
Video from the GFX100S uses the full sensor width, preserving the original field-of-view of the lens and can be recorded internally as 4K 30p video with a bit-rate of up to 400Mbps. Over HDMI the GFX100S can output either an uncompressed 16-bit raw or 10-bit 4:2:2 4K video signal, excellent news for those using external monitors/recorders such as the Atomos Ninja V.
With dedicated settings for both still or video modes, switching between shooting modes is quick and easy via a lever atop the camera. The camera's "Q" menu can be customized to provide the most valuable information as either an overlay on the live-view representation or as the entire LCD area.
Example-Setup
The Nauticam NA-GFX100S Underwater Housing
The NA-GFX100S is built with the singular focus of creating an underwater housing that blends ergonomic design, intuitive control placement and rugged field-tested durability. The resulting machined aluminum housing can be further refined with the addition of accessories from magnifying viewfinders to external monitors/recorders. To achieve the full benefit of the stunning 102MP resolution requires the use of underwater optics that are designed with high-resolution lenses in mind to deliver the highest optical quality possible.
Mission Control Design
The NA-GFX100S is designed with our Mission Control philosophy which dictates placing controls where they are needed most, meaning no more missed shots fumbling for a control or dial. The majority of exposure and focus controls are within easy reach of the ergonomic handles that feature stainless steel stiffening brackets to reduce any unwanted movement even when using large strobes or video lights. A multi-direction pad on the upper right of the rear panel gives access to the camera's joystick. A double lever near the right handle activates the 'AF-ON' and 'Q' controls. Also on the right side are levers for Focus and View modes. The left side has a double lever for 'PLAYBACK' and 'DISP' as as levers for turning the EF-X20 TTL flash on or off and one for the cameras 'V-Fn4' control. On top of the housing is a lever for switching between 'STILL' and 'VIDEO' modes.
Premium Professional Optics
Built around the N120 Port System, the NA-GFX100S supports a variety of GF-mount lenses with a selection of optical-quality glass and acrylic ports as well as access to Nauticam's lineup of premium professional optics. These optics are designed suing industrial lens design software to provide unparalleled optical quality and impressive fields-of-view. The Wide-Angle Conversion Port 2 or WACP2, when used with the Laowa 17mm f/4 GFX Zero-D lens can achieve an impressive 140º FOV with an almost 0" minimum focus distance and incredible corner sharpness even at wider-open apertures such as f/5.6.
Flash Triggering
Flash triggering is via the optional Fujifilm EF-X20 TTL flash and built-in fiber-optic bulkheads. An option for electronic strobe connection without TTL is also possible using the optional M14 Nikonos bulkhead with universal hot-shoe.
HDMI Output
The GFX100S can output high-quality uncompressed 4K video over HDMI and the NA-GFX100S is compatible the Nauticam HDMI 2.0 system via the front M24 bulkhead. Even when recording video internally, the use of an external monitor over either HDMI 1.4 or 2.0 is a great tool to help with composition or image review.
Vacuum Check and Leak Detection System
The NA-GFX100S comes with the Nauticam vacuum check and leak detection system as standard equipment. This monitoring system, working in tandem with the pre-installed vacuum valve, provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
on stock
Adapter for viewfinder collar
€125.00*
Adapter for viewfinder collar for Nauticam full frame viewfinders (NA32211/2/3/4) for use with certain MIL housings.
Canon EOS R7 Underwater Housing by Nauticam
€2,955.00*
The latest Canon APS-C mirrorless camera is finally here! The Canon EOS R7 utilizes Canon's newest RF mount and boasts a 32.5MP CMOS sensor. Crop-sensor cameras have always been popular with the underwater shooter community and with good reason. Lens choices, size, and weight are just a few of the great features that shooting APS-C cameras has. The EOS R7 gives original Canon 7D and 7D Mark II shooters a great reason to upgrade and Nauticam is ready to help with the NA-R7 housing.
The Canon EOS R7 Camera
The Canon EOS R7 is the latest in Canon's APS-C mirrorless camera lineup which has gained unprecedented demand. It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.
The R7 uses a 32.5MP CMOS sensor with in-body image stabilization which can reduce shake by up to 7 stops. The camera's Dual Pixel II autofocus system was carried over from the pro body EOS R3 and features 651 automatic AF points covering the entire sensor area. It is also capable of recording oversampled 4K 30p video using the full 7K area of the sensor, or subsampled UHD 4K up to 60p from the full sensor width.
The Canon EOS R7 can also use the large EF-mount lens lineup via a simple EF to EOS R adaptor. The Nauticam NA-R7 housing only supports the the standard EF to EOS R adaptor and does give access to the control ring or drop in filter adaptors.
Key features - Canon EOS R7
32.5MP APS-C CMOS sensor with Dual Pixel AF
Up to 30 fps shooting (e-shutter), 15 fps with mechanical
In-body image stabilization, rated at up to 7 stops
Oversampled UHD 4K up to 30p, line-skipped or cropped 4K/60p
10-bit video as 'PQ' true HDR footage or C-Log
2.36M dot OLED viewfinder
1.62M dot fully-articulating touchscreen
Twin UHS-II SD card slot
Environmental sealing
The Canon EOS R7 underwater housing from Nauticam
The NA-R7 underwater housing follows suit with Nauticam's drive for innovation. Like the full frame Canon EOS R5, R5 C and R3, the NA-R7 present shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics. To support both the legacy and native lenses, Nauticam has designed a N100 to N120 adapter which integrates into the N120 Canon EF port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R7 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF-S lens lineup emerges, dedicated port and extension ring combinations will be listed on the new N100 RF-S Port Chart.
Mission Control
Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R7 where a dual thumb lever is placed by the right front side accessing the M-Fn and Record buttons. On the rear right side is a thumb lever accessing AF-ON. Near the left handle is a thumb lever for "Playback."
Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles.
Flash triggering
Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (NA26305) or a TTL Flash Trigger (NA26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available.
Integrated system for vacuum testing and leak detection
The Nauticam vacuum check and leak detection electronics are shipped with the NA-R7 as standard equipment. Combined with an accessory vacuum valve (NA25624) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.
The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.