Nikon Z9 Underwater Housing by Nauticam

€6,315.00*

Prices incl. VAT plus shipping costs

Free shipping

Delivery time: 10 days*

M14 Vacuum Valve II

€205.00*

45° viewfinder for Nauticam SLR housing

€1,210.00*

45 °Viewfinder Unit II for Nauticam by INON

€599.00*

Full Frame Angle Viewinder 32°/ 1:1

€1,590.00*

Product number: NA17228

HAN: NA-Z9

THE NIKON Z9 MIRRORLESS FULL FRAME CAMERA

Nikon's Z9 takes a divergent step from similar top-level mirrorless full frame systems from Sony and Canon by removing the mechanical shutter altogether. This departure, along with the powerful processor allow for the true no-blackout or 'Real-Live" electronic viewfinder (EVF). With a maximum 3,000nit brightness, the EVF promises an even more natural viewing experience similar to an optical viewfinder. The 'F3' button comes pre-set to remove all overlay data from the EVF for an unobstructed composition-focused workspace. The Z9 is built around a 45.7MP stacked CMOS sensor with exceptional low light performance and 14-bit raw image capture. The ISO range of the Z9 is 64 to 25,600 with expansion possible to 32-102,400. The EXPEED 7 processor features advanced noise reduction to maximize image quality at even higher ISO values.

AUTOFOCUS

Nikon's autofocus has seen dramatic improvement with the Z series and Z9 continues that evolution with AF that works all the way down to -8.5EV (with supported lenses) and features advanced 3D subject tracking. Furthermore, the subject detection system can be set to auto-select the subject type such as animals or people. With over 400 points into auto-detect area, this is sure to deliver exceptional tracking across the frame.

8K VIDEO

The EXPEED 7 processor also allows for 8K UHD 30p internal recording with advanced heat dissipation to prevent overheating with an 8K/60P Raw recording firmware update coming in 2022. 10-bit 4K UHD can also be recorded with full pixel readout or with a 2.3x crop factor, exceptional for getting even more macro magnification. The future firmware update will add 12-bit 8K/60p in either Nikon's RAW format or ProRes RAW HQ. Internal recording is available in either H.265 (8-bit), H.265 (8,10-bit) or ProRes HQ 422 (10-bit) formats to support different workflows. The Z9 is equipped with dual CFexpress Type-B card slots that also accommodate XQD media.

nauticam-17228-NA-Z9-07

THE NAUTICAM NA-Z9 UNDERWATER HOUSING

The Nauticam NA-Z9 brings embodies the experience gained by producing professional housings for Nikon's flagship DSLR and mirrorless cameras, blending them to create the most intuitive underwater imaging platform available.

F AND Z MOUNT COMPATIBLE

The NA-Z9 uses the N120 Port System for Z-Mount full-frame lenses. When using F-mount lenses, the FTZ adapter is inside the housing which allows for the same port configuration as is found on an F-mount DSLR system such as the NA-D6 or NA-D850. Convenient lens release buttons on the housing for both F and Z mount makes lens changes a snap regardless of platform without having to remove the camera from the housing; only when installing or removing the FTZ adapter.

MISSION CONTROL

Essential control are placed within easy reach of the ergonomic handles and easy setup means more time in the water and less time working on your rig. Within easy reach of the ergonomic left handle are finger-actuated levers for the customizable 'Fn1' and 'Fn2' buttons as well as the AF-Mode button. A double thumb lever triggers the PLAYBACK and DISP buttons. On the right side is a double thumb lever for the AF-ON and REC control as well as recessed lever for ISO and a forward placed lever for the 'Fn1' button.

HDMI OUTPUT

As a true hybrid shooting platform the NA-Z9 is just as comfortable being outfitted to capture video as stills. External monitors and recorders can easily be connected via the large M24 bulkhead which supports both HDMI 1.4 and HDMI 2.0 connections.

PREMIUM PROFESSIONAL OPTICS

The NA-Z9 is built around the extensive N120 Port System that supports a wide range of F-Mount and Z-Mount lenses with a variety of acrylic and optical-glass port options. In addition to standard ports, Nauticam's premium professional water-contact optics deliver the highest possible underwater image quality. The WACP-2, when used with the Nikon Z 14-24mm lenses provides a stunning rectilinear 140º field-of-view and full zoom-through capability with an incredibly natural looking image when compared to a standard rectilinear lens and dome port combination.

nauticam-17228-NA-Z9-08

HDMI Output

Required for HDMI 2.0 System

NA25086 M24 adaptor for HDMI 2.0 cable (incl. tightening tool)
NA25099 M24A2R200-M28A1R170 HDMI 2.0 Cable (for NA-a1 to use with Ninja V housing)

Required for HDMI 1.4 System

NA25033 Standard HDMI bulkhead with M16 thread*
NA25081 M24-M16 Step Down Adaptor
NA25100 HDMI (D-A) 1.4 Cable in 200mm length for NA-a1 (for connection from HDMI bulkhead to camera)

Compatible Monitor Mounting System

NA17951 Nauticam Atomos Shogun housing mounting system
NA17954 Tripod plate for NA-A7S and NA-GH4
NA17957 Nauticam Atomos Shogun Housing Mounting Adaptor for NA-S1R/S1H/BMPCC/E2F/R3/Z9(SN from A439736)
NA17960 Universal Quadra-Pod Plate for Nauticam Housings

Arm Attachment:	1-inch ballhead
Body Material:	aluminum
Camera System:	Mirrorless (MIL)
Camera manufacturer:	Nikon
Monitor connection:	HDMI
Strobe connector:	optical Sea&Sea
Tripod connection:	Thread ¼
portsystem:	N120

Technical data

Dimensions: 361mm(W) x 235mm(H) x 165mm(D)

Weight In Air: 3.76g

Weight In Water: -0.05kg (with camera and battery)

Depth Rating: 100m

Port System: N120

Scope of delivery

Nikon Z9 Underwater Housing by Nauticam

Spare main O-ring, O-ring remover and lubricant

2x Optical bulkhead caps

Panasonic CR-2032 Battery (for moisture alarm)

Set of Allen Keys

Manual instruction card

Padded housing bag and shoulder strap

Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.

Manuals

NA17228_Nikon Z9 Unterwassergehäuse Bedienungsanleitung von Nauticam-en.pdf

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Flash Trigger

TTL Converter for Nikon

This flash trigger offers both optical and electrical triggering Optical triggering is recommended for flashes equipped in this way. Compatible housings: NA-D5 NA-D6 NA-D500 NA-D850 NA-Z7 NA-Z7II NA-Z8 Compatible flashes: Ikelite DS-160, DS-161, DS-161 Inon Z-240, Z-330 Sea&Sea YS-250, YS-D1, YS-D2, YS-D2J, YS-D3II RetraFlash PRO, PRO X To trigger your flash units electrically, add the appropriate electrical connections and connect them to the flash trigger board via two red Micro-MaTch connectors. Two new electrical connections have been created for this purpose. NA26074 Nikonos style connector NA26075 Ikelite style connector

€540.00*

M14 Ikelite Style Bulkhead with Micro Connector for Nikon TTL Converter

M14-Anschluss zur elektrischen Auslösung von Ikelite-Blitzen, speziell für den Einsatz mit dem Nikon TTL-Konverter und kompatibel mit den Gehäusen NA-D5/D500.

on stock

i-TURTLE MANUAL trigger for Nikon systems

A reliable Manual trigger for underwater photographers that works via fiber optic cable or sync cord. i-TURTLE MANUAL This Manual trigger was developed for Nikon DSLR and MILC camera systems. The i-TURTLE MANUAL is the perfect choice for the demanding underwater photographer who needs an easy to use, affordable, and reliable trigger that works with the most popular underwater strobes (Inon, Ikelite, Sea&Sea, Subtronic, OneUW, Retra, Backscatter miniflash etc). Features: 1st or 2nd curtain, HSS mode (FP). The Internal charging system works via a USB AB connector. Compatible camera models are the Nikon DSLR and Mirrorless cameras. Compatible strobes (as of 01.09.2020): Ikelite DS160 Inon Z240/Z330 Sea&Sea YS-250, YS-D1, YS-D2, D2J YS-D3, YS-110a Subtronic Pro 160, Pro 270 One UW, Retra (old and new models) Retra PRO (HSS mode available in manual (FP) mode!) The i-TURTLE MANUAL is a user-friendly trigger: you simply connect the LED or the sync cord connector and you can take hundreds of shots without charging. The TURTLE MANUAL triggers fit into the most popular underwater housings (tested with Nauticam, Subal, Hugyfot, Isotta, Ikelite, Seacam models).

€275.00*

M14 Nikonos 5-pin Bulkhead with Micro Connector for Nikon TTL Converter

M14-Anschluss zur elektrischen Auslösung von 5-poligen Blitzen im Nikon-Stil und ist speziell für den Einsatz mit dem Nikon TTL-Wandler ausgelegt und mit den Gehäusen NA-D5/D500/D850/Z7 kompatibel.

€160.00*

Details

TTL Converter for Nikon in Nauticam and Hugyfot housings

The world's first TTL converter that is compatible with all Nikon DSLR cameras, regardless of model and TTL protocol version. Compatible underwater strobes: Inon Z-330, Z-240, Ikelite DS-161, DS-160, Sea&Sea YS-D1, YS-D2 (made in China), YS-250., RetraFlash PRO and Prime (includes HSS support). Compatible housings: NA-Z9, NA-Z7 / Z6, NA-D4, NA-D4S, NA-D5, NA-D500, NA-D600/D610, NA-D750, NA-D7200, NA-D800, NA-D810, NA-D850, ...etc. The product supports 4 TTL outputs: 2 optical + 2 electrical ports . TTL converter has automatic on/off, incredible battery life 5 years. Easy installation by the user. TTL and HSS on RetraFlash Fantastic TTL accuracy allows photographers to relax and rely completely on automatic flash exposure control. Many creative tasks are made possible by using extremely fast HSS shutter speeds of up to 1/8000 with the Retra Pro flash in manual mode. The TTL converter firmware also has some other important updates related to its common functionality. The Retra PRO profile can be set by the user üt via the TTL converter's built-in rotary switch. The TTL/M modes can be switched underwater simply by using the camera name or the flash button. In manual mode, the flash intensity can be adjusted manually üvia the camera wheel/scale, but also üvia the flash control knob. (+/-) TTL flash compensation is supported by the firmware, the full range is available via the camera control in the range -3ev......+3ev. The firmware supports sync settings for the 1-st /2-nd curtain and the rear curtain. Continuous (serial) recording is supported. The HSS firmware of the TTL converter supports the HSS functionality of the Retra Pro flash. The built-in rotary switch must be set to the Retra Pro profile (position - "7"). Available HSS shutter speeds for Sony A7-A9: 1/320 ....1/8000 sec. The Retra flash allows the HSS flash intensity to be set using the rotary knob. In the updated firmware, switching to HSS shutter speeds is also included in the general functionality of the TTL converter (also for all other positions of the rotary switch), - usable for shooting with ambient light at high shutter speeds if required. However, the X-Sync speed limit (1/250 for Sony A7-A9) is still automatically supported for TTL modes, as required for mono flash TTL underwater flash. Incredibly long battery life in the TTL converter: 1-3 years of continuous operation. The product has extremely low power consumption. The converter features an automatic on/off switching module that saves battery power. No mechanical switch is required to switch UW Technics TTL converters on and off. The TTL converter firmware includes TTL profiles for the following underwater flashes: Retra Pro, Inon Z-330/ Z-240/S-2000, Sea&Sea YS-D2/ YS-D1/ YS-250, Ikelite DS-161/ DS-160 and Subtronic Pro-270/Pro-160. Each profile can be easily set by the user üvia an onboard switch.

€519.00*

on stock

i-Turtle Smart TTL Trigger for Nikon

A reliable TTL and manual trigger that works via fibre optic cable or sync cable. i-Turtle Smart This TTL trigger was developed for Nikon DSLR camera systems. It is inserted directly into the camera's hot shoe. i-TTL Unified mode The new i-TURTLE SMART TTL trigger operates in i-TTL Unified mode, switching between manual and TTL modes from the camera. The i-TURTLE SMART is the perfect choice for the demanding underwater photographer who needs a reliable TTL converter that works with the most popular underwater flashes (Inon, Ikelite, Sea&Sea, Subtronic). You can read about the compatible camera models in our blog post: https://www.trt-electronics.com/blog/nikon-unified-system-in-i-turtle-smart/12/ The i-TURTLE SMART is a state-of-the-art, user-friendly TTL converter that can be upgraded by the user via the USB port for flash characteristics and some special function parameters. Once upgraded, simply select the flash and camera model from the software and load the setup into the TURTLE's memory. USB connection The internal charging system works via the USB-AB port (This is a normal Android phone charger). The package includes the i-TURTLE SMART TTL trigger for Nikon cameras and the LED panel or the special cable for connection to the sync cable. (Please write to us which type of connection you are using. We also recommend that you write us what type of underwater flash you control with the TURTLE trigger).

€365.00*

Tripod

Stativplatte für NA-A7S/GH4/A7II/GH5/A9

Stativplatte, die an der Unterseite des Gehäuses befestigt wird und drei Standard 1 Zoll Kugelköpfe für Stativbeine oder anderes Zubehör bietet. HINWEIS: Eignet sich nicht für die Cinema-Gehäuse von Nauticam

€580.00*

on stock

Mounting Ball Set for Tripod

This kit allows for the secure mounting of industry standard 1" ball mounts directly onto the NA-A9 housing that provides a low-profile attachment point for tripod legs or accessory light arms. Compatible with Nauticam Housings: NA-A9 NA-A7RIII NA-BMPCC NA-XT3 NA-RIV NA-Z50 NA-XT5

€77.00*

Universal Quadra-Pod Plate

A stable filming platform is crucial to capturing many underwater scenes. While larger cinema systems such as the NA-C200, RED Komodo and RED DSMC2 housings feature integrated stabilization options, many Nauticam DSLR and Mirrorless systems now have an option for a similar level of support with the Universal Quadra-Pod Plate. INTRODUCING UNIVERSAL QUADRA-POD PLATE FOR NAUTICAM HOUSINGS Featuring a flexible housing mounting position, the Quadra-Pod attaches via the integrated threaded mounts on the bottom of supported housings with large knurled thumb screws. The Quadra-Pod can be used in either Quadrapod or Tripod configurations. QUADRAPOD CONFIGURATION TRIPOD CONFIGURATION There are five separate positions with which the Quadra-Pod can be mounted relative to the housing extending either more towards the front or rear of the housing. This flexible positioning allows for the use of various ports and accessories without interference. Four 1" ball mounts can be used to attach a variety of leg options and configurations such as Nauticam double ball arms. The Nauticam Universal Quadra-Pod gives DSLR and Mirrorless users a flexible solution to achieving a more stable filming position underwater while maintaining the low profile that makes these systems appealing.

€375.00*

Spare parts

on stock

M16 plug for housing (with o-ring)

To cover an M16 socket on an underwater housing from Nauticam.

€23.00*

on stock

M14 plug for housing (with o-ring)

Plug for M14 bulkhead on underwater housings.

€23.00*

on stock

Housing cap (N120)

Protect the housing's port sealing surface and prevent dust infiltration into the housing when not in use with this Housing Cap that also has a bayonet ring allowing it to be locked in place as a port would.

€58.00*

Housing o-ring 90222

Spare housing O-ring for the following Nauticam underwater housings: NA-S1H NA-C70 NA-Z9 NA-R3

€24.00*

on stock

Spare O-Rings for 1 inch ballheads

Spare O-rings for 1-inch ball heads in the popular Nauticam blue.

€16.00*

on stock

M14 Vacuum Valve II

Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*

45° viewfinder for Nauticam SLR housing

Nauticam's improved 45°angle viewfinder is the perfect complement to your housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder, as well as a 45°viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your regulator, allowing for a more comfortable viewing position. Introducing the NAUTICAM 45° VIEWFINDER . Long- or short-sightedness? The viewfinder features an external knob for vision compensation; easy diopter adjustment can now be made underwater without disassembling the viewfinder . Proven design The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion . INSTALLING THE SEARCHER . With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to the housings of Ikelite, Aquatica, Sea & Sea and Nexus. Note: Because some newer camera models have higher magnifications and a decreasing eye point, there may be a slight reduction in view from edge to edge when using a Nauticam magnification viewfinder. The extent varies, but the benefits of the magnification viewfinder remain.

€1,210.00*

on stock

45 °Viewfinder Unit II for Nauticam by INON

This viewfinder can be used at all DSLR Underwater Housings by Nauticam. It also fits at: Sony: α1 / A9 / A7RV / A7IV / A7SIII / α2020 / A7RIV / A7RIII / A7II / A7 Nikon: Z9 / Z7 / Z7Ⅴ / Z7II / Z50 Canon: R5C / R3 / R5 / R6 / R7 / EOS R Fujifilm: XT4 / XT3 / GFX100S / GFX100 / GFX50S Panasonic: NA-S1R, NA-S1H Olympus: EM1X The viewfinders are bundled with dedicated tool to remove preinstalled Nauticam viewfinder and install INON viewfinder for self installation. You can refer to instruction movie in addition to the user manual. If you do not have confident on self installation, please contact us for advice. Olympus: NA-EM1X

€599.00*

on stock

Full Frame Angle Viewinder 32°/ 1:1

The next generation Nauticam Full Angle Straight Viewfinder is the perfect addition to your housing as it provides a bright, clear and undistorted 1:1 image of the camera’s viewfinder and is essential for precise focusing and artistic composition. This viewfinder is also available in an 0.8:1 version that can also accommodate viewing of the entire image field on cameras with larger EVFs such as the Sony A1. The Full Frame Angle Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature. The viewfinder can also be rotated when using the camera in a portrait orientation. INTRODUCING NAUTICAM FULL FRAME ANGLE VIEWFINDER 32°/ 1:1 For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings. In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Straight Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy. 32º/1:1 VS. 42º/0.8:1 Because different photographers have different needs and priorities, Nauticam offers the Full Frame Angle Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry. For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data. HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder. as well as the simple installation and removal that takes only seconds. TOOL FREE INSTALLATION The Nauticam Full Frame Angle Viewfinder can be installed in seconds without any tools. The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings. The viewfinder can also be rotated when using the camera in a portrait orientation. Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at. <iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

€1,590.00*

Similar products

Nikon Z9 Underwater Housing by Isotta

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Isotta's Nikon Z9 Underwater Housing The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z9. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls On and off lever of the Nikon Z9 Ergonomic camera focusing and shutter lever, easy to use with gloves Lens release lever Front dial Fn1 lever Fn2 lever Fn3 lever ISO button MODE button BKT button Flash button +/- button Focus mode button Quick release-mode button Zoom knob Port safety lever Movie lever (REC) AF-ON lever Rear dial R Release mode knob I (info) button Menu button AEL button DISP. button Multi-selector Playback, Viewing pictures button Zoom-in (+) button Zoom-out (-) button Qual button WB button Delete button Fn4 button Photo/video selector On/Off Display lever Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections standard (to shoot it needs an additional trigger) Three M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port 120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€5,490.00*

Ball heads

on stock

M10 Strobe Mounting Ball for Housing

Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€40.00*

M5 Strobe Mounting Ball for Housing

Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€27.00*

Monitor Housing Mounting Adaptor

This kit replaces the standard handle top plates to allow the mounting of Nauticam monitor housings to compatible Nauticam underwater housings.

€190.00*

on stock

Housing Mounting Ball with 1/4'' Screws

This standard 1" mounting ball is designed to work with housings that feature the 1/4-20 threaded mounting locations such as the NA-E2 and NA-BMPCC6K. NOTE: please confirm the housing you wish to use with this ball mount features the 1/4-20 threading before purchase.

€43.00*

HDMI 2.0

Atomos Ninja V Underwater housing by Nauticam

With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas. THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.

€2,435.00*

on stock

M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)

€55.00*

on stock

HDMI 2.0 Cable M24A2R200-M28A1R170 by Nauticam

This is the HDMI 2.0 cable necessary to use the Housings NA-alpha1, NA-GH6 und NA-A9III with the 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player. Note: this cable supports RAW 16bit 4.2K (4264 x 2408) up to 59.94p output but actual capture quality is subject to recorder capabilities.

€295.00*

Atomos Ninja V (SDI) Underwater Housing by Nauticam

This version is suitable to accommodate the Atomos AtomX SDI module. With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest areas. THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.

€2,660.00*

HDMI 1.4

Underwater Monitor WED-7 Pro

The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*

on stock

HDMI (D-A) Cable in 20mm length

This 200 mm HDMI cable is used for internal connection between the HDMI housing connector and the HDMI camera output.

€84.00*

on stock

WED-5 Underwater Monitor

5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*

Nikon Z9 Underwater Housing by Nauticam

THE NIKON Z9 MIRRORLESS FULL FRAME CAMERA

AUTOFOCUS

8K VIDEO

THE NAUTICAM NA-Z9 UNDERWATER HOUSING

F AND Z MOUNT COMPATIBLE

MISSION CONTROL

HDMI OUTPUT

PREMIUM PROFESSIONAL OPTICS

HDMI Output

Required for HDMI 2.0 System

Required for HDMI 1.4 System

Compatible Monitor Mounting System

Login

Ask a question

Previously asked questions